Filmové kondenzátory od společnosti AIC-Europe
Náš oficiální prodejní partner: AIC Europe
Společnost AIC Europe je předním dodavatelem elektrolytických a filmových kondenzátorů s více než 30 lety zkušeností v oboru. S impozantní výrobní kapacitou 90 milionů kondenzátorů ročně a mírou FIT nižší než 0,5 je AIC Europe zárukou nejvyšší kvality a spolehlivosti.
Společně se společností AIC Europe se zaměřujeme na inovativní technologie a udržitelné postupy, abychom zajistili úspěch vašich aplikací.
Společně se společností AIC Europe se zaměřujeme na inovativní technologie a udržitelné postupy, abychom zajistili úspěch vašich aplikací.
Široký sortiment filmových kondenzátorů
Naše výrobky se vyznačují nízkým ESR a vysokou schopností zvlnění proudu, což je předurčuje pro náročné aplikace. Díky vysoké dielektrické pevnosti a dlouhé životnosti nabízejí naše kondenzátory spolehlivost a účinnost. Volitelně jsou k dispozici se segmentovanou fólií pro zvýšení bezpečnosti.
Naše filmové kondenzátory nabízíme v různých produktových řadách, z nichž každá splňuje specifické požadavky. Podrobné specifikace jednotlivých řad naleznete na našich webových stránkách.
Naše filmové kondenzátory nabízíme v různých produktových řadách, z nichž každá splňuje specifické požadavky. Podrobné specifikace jednotlivých řad naleznete na našich webových stránkách.
Filmové kondenzátory od společnosti AIC Europe
MKCA
| Rated DC Voltage UN derating | Voltage test between terminals UTT | 450 Vdc at 85°C, 500 Vdc at 70 °C, 300 Vdc at 105 °C, UTT 650 Vdc / 10 s, 700 Vdc at 85°C, 800 Vdc at 70 °C, 500 Vdc at 105 °C, UTT 1050 Vdc / 10 s, 1100 Vdcat 85°C, 1300 Vdc at 70 °C, 800 Vdc at 105 °C, UTT 1650 Vdc / 10 s |
| Nominal Capacitance | CN [μF] | 1-80 |
| Ripple Current | at 70 °C 1 k –10 kHz | Ir [A RMS] | 1,5-23 |
| Peak Current | Maximum value | Î [A] | 50-1500 |
| ESR | ESR [mΩ] | 3,5-80 |
| Thermal Resistance | Rth [K/W] | 7,3-48,7 |
| dv/dt | [V/μs] | 15-70 |
| Dimensions | Case Size | T x H x L [mm] | 11 x 20 x 32, 18 x 33 x 32, 35 x 50 x 42.5, 35 x 50 x 57.5, 9 x 18 x 32, 35 x 60 x 57.5 |
| Terminals | P1 [mm] | 27,5-52,5 |
| P2 [mm] | 20,3 |
| Ød [mm] | 0,8-1,2 |
MKCHA
| Nominal Capacitance | CN | [μF] | 1-170 |
| Ripple Current | at 70 °C 1 k –10 kHz | Ir | [A RMS] | 2-36,4 |
| Peak Current | Maximum value | Î | [A] | 50-2550 |
| ESR | ESR | [mΩ] | 2,5-64 |
| Thermal Resistance | Rth | [K/W] | 2,7-43,5 |
| dv/dt | [V/μs] | 12-80 |
| Terminals | P1 [mm] | 27,5-52,5 |
| Ød [mm] | 0,8-1,2 |
MKCP4
| Rated DC Voltage UN derating | Voltage test between terminals UTT | 450 Vdc at 85°C, 500 Vdc at 70 °C, 300 Vdc at 105 °C, UTT, 650 Vdc / 10 s, , 700 Vdc at 85°C, 800 Vdc at 70 °C, 500 Vdc at 105 °C, 1050 Vdc / 10 s, 900 Vdc at 85°C, 1100 Vdc at 70 °C, 650 Vdc at 105 °C, 1350 Vdc / 10 s, 1100 Vdc at 85°C, 1300 Vdc at 70 °C, 800 Vdc at 105 °C, 1650 Vdc / 10 s |
| Nominal Capacitance | CN | [μF] | 2,5-180 |
| Ripple Current | at 85 °C 1 k –10 kHz | Ir | [A RMS] | 4-25 |
| Peak Current | Maximum value | Î | [A] | 150-920, 1-2 000, 1 200, 1-2 400, 1 600, 1 300, 1 700, 1 800, 2 500, 1 100 |
| ESL | ESL | [nH] | 2,5-35 |
| ESR | ESR | [mΩ] | 14-30 |
| Thermal Resistance | Rth | [K/W] | 6-20 |
| dv/dt | [V/μs] | 14-60 |
| Dimensions | Case Size | L x H x T [mm] | 21,5 x 38.5 x 43, 24 x 44 x 42, 30 x 45 x 42, 30 x 55 x 42, 25-60 x 45 x 57.5, 35 x 50 x 57.5, 35 x 60 x 57.5, 35 x 80 x 57.5, 18 x 32 x 42, 21,5 x 38.5 x 43, 28 x 42.5 x 42, 25-45 x 65 x 57.5, 45 x 57 x 57.5, 20 x 14 x 31.5, 27-45 x 21 x 42, 23 x 34 x 43, 16 x 31 x 41, 35-39 x 24 x 57.5, 27 x 36 x 41, 43 x 22 x 57.5, 29 x 44 x 41, 18 x 32 x 42 |
| Terminals | P1 [mm] | 27,5-52,5 |
| P2 [mm] | 5-20,3 |
| Ød [mm] | 1-1,2 |
MKCP4T
| Rated DC Voltage UN derating | Voltage test between terminals UTT | 450 Vdc at 85°C, 500 Vdc at 70 °C, 300 Vdc at 105 °C, UTT, 650 Vdc / 10 s, , 700 Vdc at 85°C, 800 Vdc at 70 °C, 500 Vdc at 105 °C, 1050 Vdc / 10 s, 900 Vdc at 85°C, 1100 Vdc at 70 °C, 650 Vdc at 105 °C, 1350 Vdc / 10 s, 1100 Vdc at 85°C, 1300 Vdc at 70 °C, 800 Vdc at 105 °C, 1650 Vdc / 10 s |
| Nominal Capacitance | CN | [μF] | 5-120 |
| Ripple Current | at 85 °C 1 k –10 kHz | Ir | [A RMS] | 7,5-22,5 |
| Peak Current | Maximum value | Î | [A] | 225-800, 1-2 000, 1 400, 1 600, 1 200, 1 700, 1 800, 1 100 |
| ESL | ESL | [nH] | 3-16 |
| ESR | ESR | [mΩ] | 18-35 |
| Thermal Resistance | Rth | [K/W] | 7-13 |
| dv/dt | [V/μs] | 20-45 |
| Dimensions | Case Size | L x H x T [mm] | 21,5 x 38.5 x 43, 24 x 44 x 42, 30 x 45 x 42, 30 x 55 x 42, 25-60 x 45 x 57.5, 35 x 50 x 57.5, 35 x 60 x 57.5, 21,5 x 38.5 x 43, 28 x 42.5 x 42, 35 x 80 x 57.5 |
| Terminals | P1 [mm] | 37,5-52,5 |
| P2 [mm] | 10,2-20,3 |
| Ød [mm] | 1-1,2 |
MLC
| Nominal Capacitance | CN | [μF] | 70-990, 1-2 000, 1 100, 1 200, 1-2 300, 1 400, 1 500, 1 700, 1 600, 1 900 |
| Ripple Current | at 50°C 1 k –10 kHz | Ir * | [A RMS] | 22-81 |
| Peak Current | Maximum value | Î | [kA] | 2-24 |
| Surge Current | Maximum value | IS | [kA] | 6-72 |
| ESR | ESR | [mΩ] | 0,8-8,1 |
| ESL | ESL | [nH] | 60, 65, 75, 80, 90, 40, 100, 45, 50, 55, 70 |
| Thermal Resistance | Rth | [K/W] | 8.4, 7.9, 7.8, 7.4, 7.7, 7.0, 6.8, 6.5, 6.4, 6.1, 5.6, 5.9, 5.7, 4.8, 5.4, 6.0, 5.2, 4.5, 4.9, 4.1, 4.2, 4.7, 4.0, 3.8, 5.0, 3.9, 4.3, 3.6, 6.6, 3.4, 3.2, 3.0, 3.5, 5.8, 2.9, 2.7, 3.3, 2.8, 2.6, 5.1, 3.1, 2.5, 2.2, 2.3, 3.7, 2.0, 8.6, 7.6, 8.3, 7.1, 7.5, 6.9, 7.3, 6.2, 6.7, 6.3, 4.6, 4.4, 2.4, 8.1, 8.2, 7.2, 5.5, 5.3, 8.0 |
| Case Size | D x L | [mm] | 85-140x70, 85-140x75, 85-140x80, 85-140x87, 85-140x95, 85-140x106, 85-140x125, 85-140x120, 85-140x135, 85-140x145, 85-140x159, 85-140x175, 85-140x197, 85-140x225, 85x137.5, 88,5-100x155, 85x252, 116x235, 116x140 |
MLC2
| Rated DC Voltage UN | Max ripple Voltage Ur | Non repetitive | Surge Volt. US | 800 VDC, Ripple Voltage 200 V, Surge Voltage 1200 V, , 900 VDC, Surge Voltage 1350 V |
| Nominal Capacitance | CN | [μF] | 230-980, 1-2 000, 1-2 100, 1-2 200, 1-3 300, 1 400, 1-2 500, 1 600, 1 700, 1-3 800, 1-2 900 |
| Ripple Current | at 50°C 1 k –10 kHz | Ir * | [A RMS] | 27-100 |
| Peak Current | Maximum value | Î | [kA] | 4-31 |
| Surge Current | Maximum value | IS | [kA] | 12-93 |
| ESR | ESR | [mΩ] | 0,7-5,1 |
| ESL | ESL | [nH] | 40-100 |
| Thermal Resistance | Rth | [K/W] | 2,1-8,4 |
| Case Size | D x L | [mm] | 85-140x70, 85-140x75, 85-140x80, 85-140x87, 85-140x95, 85-140x106, 85-140x125, 85-140x120, 85-140x135, 85-140x145, 85-140x159, 85-140x175, 85-140x197, 85-140x225 |
MLCA
| Rated DC Voltage UN | Test Voltage between | terminals UTT | terminals & case UTC | 600 Vdc, UTT 900 Vdc /10 s, UTC 3 000 Vac /10 s, , 700 Vdc, UTT 1 050 Vdc /10 s, UTC 3 000 Vac /10 s, 800 Vdc, UTT 1200 Vdc /10 s, UTC 3 000 Vac /10 s, 900 Vdc, UTT 1350 Vdc /10 s, 1 000 Vdc, UTT 1 500 Vdc /10 s, 1100 Vdc, UTT 1 650 Vdc /10 s, 1 200 Vdc, UTT 1 800 Vdc /10 s, 1 300 Vdc, UTT 1 950 Vdc /10 s, 1 500 Vdc, UTT 2 250 Vdc /10 s, 1 700 Vdc, UTC 4 000 Vac /10 s, 2 000 Vdc, UTT 3 000 Vdc /10 s, 2 200 Vdc, UTT 3300 Vdc /10 s, UTC 4000 Vac /10 s |
| Nominal Capacitance | CN | [μF] | 90-970, 1-5 000, 1-2 100, 1-2 200, 1-3 300, 1 600, 1 800, 1 900, 1-2 400, 1 500 |
| Ripple Current 1kHz at 40 °C | at 40 °C | Ir * | [A RMS] | 46-100 |
| Ripple Current 1kHz at 50 °C | at 50 °C | Ir * | [A RMS] | 40-100 |
| Peak Current | Maximum value | Î | [kA] | 1,08-25 |
| ESR | ESR | [mΩ] | 0,6-4,1 |
| ESL | ESL | [nH] | 50-80 |
| Thermal Resistance | Rth | [K/W] | 2,2-5,6 |
| Case Size | # = variable value, | D x L | [mm] | 76-116x95, 76-116x120, 76-116x136, 76-116x175, 76-116x155, 86x225, 116x230, 116x345, 86x250 |
| at 60 °C | Ir * | [A RMS] | 32-100 |
| at 70 °C | Ir * | [A RMS] | 23-71 |
MKCHS
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
Filmový kondenzátor pro elektronický průmysl
Koupit filmové kondenzátory
- Velký výběr filmových kondenzátorů
- Pro průmysl, letectví, lékařskou techniku a mnoho dalšího
- Spolehlivá funkce v průmyslu a elektronice
- Efektivní řešení od společnosti Rotima AG
Filmové kondenzátory od společnosti AIC Europe
Fóliové kondenzátory
MKCA
Fóliové kondenzátory
MKCHA
Fóliové kondenzátory
MKCP4
Fóliové kondenzátory
MKCP4T
Fóliové kondenzátory
MLC
Fóliové kondenzátory
MLC2
Fóliové kondenzátory
MLCA
Fóliové kondenzátory
MKCHS
Máte nějaké dotazy k naší nabídce?
Filmové kondenzátory od společnosti AIC-Europe
Naše nabídka dalších kondenzátorů:
Elektrolytické kondenzátory
Elektrolytické kondenzátory jsou speciální kondenzátory s vysokou kapacitou, které jako vodivé médium používají elektrolyt. Uchovávají elektrickou energii a používají se v napájecích zdrojích, zvukových a vysokofrekvenčních obvodech. Vzhledem k jejich polaritě je lze používat pouze v obvodech stejnosměrného proudu. Běžnými typy jsou hliníkové, tantalové a niobové elektrolytické kondenzátory.
Keramické kondenzátory
Keramické kondenzátory jsou elektrické součástky pro ukládání energie a filtrování signálů. Skládají se z keramického dielektrika a kovových desek. Jejich výhody: vysoká stabilita, nízké ztráty, rychlé nabíjení a vybíjení. Používají se v elektronice, vysokofrekvenční technice a energetických aplikacích - od chytrých telefonů po průmyslové řídicí systémy.
Tantalové kondenzátory
Tantalové kondenzátory jsou elektrické kondenzátory s tantalem jako anodovým materiálem. Vyznačují se vysokou kapacitní hustotou, nízkými svodovými proudy a stabilními elektrickými vlastnostmi. Často se používají ve vysokofrekvenčních a miniaturních aplikacích a nabízejí spolehlivý výkon v mobilních zařízeních, lékařské technice a průmyslových obvodech. Jejich oxidové dielektrikum zajišťuje vysokou dielektrickou pevnost a dlouhou životnost.
Co můžeme pro vás udělat?
Kontaktujte naše odborníky na produkty
Co můžeme pro vás udělat?
Kontaktujte naše odborníky na produkty
Máte nějaké dotazy ohledně následujících otázek:
Filmové kondenzátory od společnosti AIC-Europe
Stačí nám poslat textovou zprávu a rádi Vám odpovíme na Vaši otázku telefonicky nebo e-mailem.
Máte otázky?
Napište nám!
Chcete se dozvědět více o našich vysoce kvalitních produktech?
Máme velký sklad, krátké dodací lhůty a bezcelní dodání!
Neváhejte nás kontaktovat , rádi vám poradíme osobně.
Neváhejte nás kontaktovat , rádi vám poradíme osobně.
Vaše kontaktní osoby
Žádost o zpětné volání
Chcete osobní telefonickou konzultaci?
Stačí vyplnit formulář a my se vám ozveme.
Jaké jsou výhody použití transformátoru napětí DC ve srovnání s transformátorem střídavého napětí?
Vyplňte prosím níže uvedený formulář a stáhněte si datový list tohoto výrobku.
Jaké jsou výhody použití transformátoru napětí DC ve srovnání s transformátorem střídavého napětí?
Nyní můžete kliknout a stáhnout dokumenty PDF jako obvykle.
X
