AIC-Europe plėveliniai kondensatoriai
Mūsų oficialus pardavimo partneris: AIC Europe
"AIC Europe" yra pirmaujanti elektrolitinių ir plėvelinių kondensatorių tiekėja, turinti daugiau kaip 30 metų patirtį šioje pramonės šakoje. Įspūdingi 90 mln. kondensatorių per metus gamybos pajėgumai ir FIT rodiklis, mažesnis nei 0,5, leidžia "AIC Europe" užtikrinti aukščiausią kokybę ir patikimumą.
Kartu su "AIC Europe" daugiausia dėmesio skiriame novatoriškoms technologijoms ir tvariai praktikai, kad užtikrintume jūsų taikomųjų programų sėkmę.
Kartu su "AIC Europe" daugiausia dėmesio skiriame novatoriškoms technologijoms ir tvariai praktikai, kad užtikrintume jūsų taikomųjų programų sėkmę.
Platus plėvelinių kondensatorių asortimentas
Mūsų gaminiai pasižymi maža ESR ir didele pulsacijų srove, todėl idealiai tinka reikliems taikymams. Mūsų kondensatoriai pasižymi dideliu dielektriniu atsparumu ir ilgaamžiškumu, todėl yra patikimi ir efektyvūs. Papildomai juos galima įsigyti su segmentine plėvele, kad būtų užtikrintas didesnis saugumas.
Mūsų plėveliniai kondensatoriai siūlomi skirtingų gaminių serijų, kurių kiekviena atitinka specifinius reikalavimus. Išsamias kiekvienos serijos specifikacijas rasite mūsų svetainėje.
Mūsų plėveliniai kondensatoriai siūlomi skirtingų gaminių serijų, kurių kiekviena atitinka specifinius reikalavimus. Išsamias kiekvienos serijos specifikacijas rasite mūsų svetainėje.
"AIC Europe" plėveliniai kondensatoriai
MKCA
| Rated DC Voltage UN derating | Voltage test between terminals UTT | 450 Vdc at 85°C, 500 Vdc at 70 °C, 300 Vdc at 105 °C, UTT 650 Vdc / 10 s, 700 Vdc at 85°C, 800 Vdc at 70 °C, 500 Vdc at 105 °C, UTT 1050 Vdc / 10 s, 1100 Vdcat 85°C, 1300 Vdc at 70 °C, 800 Vdc at 105 °C, UTT 1650 Vdc / 10 s |
| Nominal Capacitance | CN [μF] | 1-80 |
| Ripple Current | at 70 °C 1 k –10 kHz | Ir [A RMS] | 1,5-23 |
| Peak Current | Maximum value | Î [A] | 50-1500 |
| ESR | ESR [mΩ] | 3,5-80 |
| Thermal Resistance | Rth [K/W] | 7,3-48,7 |
| dv/dt | [V/μs] | 15-70 |
| Dimensions | Case Size | T x H x L [mm] | 11 x 20 x 32, 18 x 33 x 32, 35 x 50 x 42.5, 35 x 50 x 57.5, 9 x 18 x 32, 35 x 60 x 57.5 |
| Terminals | P1 [mm] | 27,5-52,5 |
| P2 [mm] | 20,3 |
| Ød [mm] | 0,8-1,2 |
MKCHA
| Nominal Capacitance | CN | [μF] | 1-170 |
| Ripple Current | at 70 °C 1 k –10 kHz | Ir | [A RMS] | 2-36,4 |
| Peak Current | Maximum value | Î | [A] | 50-2550 |
| ESR | ESR | [mΩ] | 2,5-64 |
| Thermal Resistance | Rth | [K/W] | 2,7-43,5 |
| dv/dt | [V/μs] | 12-80 |
| Terminals | P1 [mm] | 27,5-52,5 |
| Ød [mm] | 0,8-1,2 |
MKCP4
| Rated DC Voltage UN derating | Voltage test between terminals UTT | 450 Vdc at 85°C, 500 Vdc at 70 °C, 300 Vdc at 105 °C, UTT, 650 Vdc / 10 s, , 700 Vdc at 85°C, 800 Vdc at 70 °C, 500 Vdc at 105 °C, 1050 Vdc / 10 s, 900 Vdc at 85°C, 1100 Vdc at 70 °C, 650 Vdc at 105 °C, 1350 Vdc / 10 s, 1100 Vdc at 85°C, 1300 Vdc at 70 °C, 800 Vdc at 105 °C, 1650 Vdc / 10 s |
| Nominal Capacitance | CN | [μF] | 2,5-180 |
| Ripple Current | at 85 °C 1 k –10 kHz | Ir | [A RMS] | 4-25 |
| Peak Current | Maximum value | Î | [A] | 150-920, 1-2 000, 1 200, 1-2 400, 1 600, 1 300, 1 700, 1 800, 2 500, 1 100 |
| ESL | ESL | [nH] | 2,5-35 |
| ESR | ESR | [mΩ] | 14-30 |
| Thermal Resistance | Rth | [K/W] | 6-20 |
| dv/dt | [V/μs] | 14-60 |
| Dimensions | Case Size | L x H x T [mm] | 21,5 x 38.5 x 43, 24 x 44 x 42, 30 x 45 x 42, 30 x 55 x 42, 25-60 x 45 x 57.5, 35 x 50 x 57.5, 35 x 60 x 57.5, 35 x 80 x 57.5, 18 x 32 x 42, 21,5 x 38.5 x 43, 28 x 42.5 x 42, 25-45 x 65 x 57.5, 45 x 57 x 57.5, 20 x 14 x 31.5, 27-45 x 21 x 42, 23 x 34 x 43, 16 x 31 x 41, 35-39 x 24 x 57.5, 27 x 36 x 41, 43 x 22 x 57.5, 29 x 44 x 41, 18 x 32 x 42 |
| Terminals | P1 [mm] | 27,5-52,5 |
| P2 [mm] | 5-20,3 |
| Ød [mm] | 1-1,2 |
MKCP4T
| Rated DC Voltage UN derating | Voltage test between terminals UTT | 450 Vdc at 85°C, 500 Vdc at 70 °C, 300 Vdc at 105 °C, UTT, 650 Vdc / 10 s, , 700 Vdc at 85°C, 800 Vdc at 70 °C, 500 Vdc at 105 °C, 1050 Vdc / 10 s, 900 Vdc at 85°C, 1100 Vdc at 70 °C, 650 Vdc at 105 °C, 1350 Vdc / 10 s, 1100 Vdc at 85°C, 1300 Vdc at 70 °C, 800 Vdc at 105 °C, 1650 Vdc / 10 s |
| Nominal Capacitance | CN | [μF] | 5-120 |
| Ripple Current | at 85 °C 1 k –10 kHz | Ir | [A RMS] | 7,5-22,5 |
| Peak Current | Maximum value | Î | [A] | 225-800, 1-2 000, 1 400, 1 600, 1 200, 1 700, 1 800, 1 100 |
| ESL | ESL | [nH] | 3-16 |
| ESR | ESR | [mΩ] | 18-35 |
| Thermal Resistance | Rth | [K/W] | 7-13 |
| dv/dt | [V/μs] | 20-45 |
| Dimensions | Case Size | L x H x T [mm] | 21,5 x 38.5 x 43, 24 x 44 x 42, 30 x 45 x 42, 30 x 55 x 42, 25-60 x 45 x 57.5, 35 x 50 x 57.5, 35 x 60 x 57.5, 21,5 x 38.5 x 43, 28 x 42.5 x 42, 35 x 80 x 57.5 |
| Terminals | P1 [mm] | 37,5-52,5 |
| P2 [mm] | 10,2-20,3 |
| Ød [mm] | 1-1,2 |
MLC
| Nominal Capacitance | CN | [μF] | 70-990, 1-2 000, 1 100, 1 200, 1-2 300, 1 400, 1 500, 1 700, 1 600, 1 900 |
| Ripple Current | at 50°C 1 k –10 kHz | Ir * | [A RMS] | 22-81 |
| Peak Current | Maximum value | Î | [kA] | 2-24 |
| Surge Current | Maximum value | IS | [kA] | 6-72 |
| ESR | ESR | [mΩ] | 0,8-8,1 |
| ESL | ESL | [nH] | 60, 65, 75, 80, 90, 40, 100, 45, 50, 55, 70 |
| Thermal Resistance | Rth | [K/W] | 8.4, 7.9, 7.8, 7.4, 7.7, 7.0, 6.8, 6.5, 6.4, 6.1, 5.6, 5.9, 5.7, 4.8, 5.4, 6.0, 5.2, 4.5, 4.9, 4.1, 4.2, 4.7, 4.0, 3.8, 5.0, 3.9, 4.3, 3.6, 6.6, 3.4, 3.2, 3.0, 3.5, 5.8, 2.9, 2.7, 3.3, 2.8, 2.6, 5.1, 3.1, 2.5, 2.2, 2.3, 3.7, 2.0, 8.6, 7.6, 8.3, 7.1, 7.5, 6.9, 7.3, 6.2, 6.7, 6.3, 4.6, 4.4, 2.4, 8.1, 8.2, 7.2, 5.5, 5.3, 8.0 |
| Case Size | D x L | [mm] | 85-140x70, 85-140x75, 85-140x80, 85-140x87, 85-140x95, 85-140x106, 85-140x125, 85-140x120, 85-140x135, 85-140x145, 85-140x159, 85-140x175, 85-140x197, 85-140x225, 85x137.5, 88,5-100x155, 85x252, 116x235, 116x140 |
MLC2
| Rated DC Voltage UN | Max ripple Voltage Ur | Non repetitive | Surge Volt. US | 800 VDC, Ripple Voltage 200 V, Surge Voltage 1200 V, , 900 VDC, Surge Voltage 1350 V |
| Nominal Capacitance | CN | [μF] | 230-980, 1-2 000, 1-2 100, 1-2 200, 1-3 300, 1 400, 1-2 500, 1 600, 1 700, 1-3 800, 1-2 900 |
| Ripple Current | at 50°C 1 k –10 kHz | Ir * | [A RMS] | 27-100 |
| Peak Current | Maximum value | Î | [kA] | 4-31 |
| Surge Current | Maximum value | IS | [kA] | 12-93 |
| ESR | ESR | [mΩ] | 0,7-5,1 |
| ESL | ESL | [nH] | 40-100 |
| Thermal Resistance | Rth | [K/W] | 2,1-8,4 |
| Case Size | D x L | [mm] | 85-140x70, 85-140x75, 85-140x80, 85-140x87, 85-140x95, 85-140x106, 85-140x125, 85-140x120, 85-140x135, 85-140x145, 85-140x159, 85-140x175, 85-140x197, 85-140x225 |
MLCA
| Rated DC Voltage UN | Test Voltage between | terminals UTT | terminals & case UTC | 600 Vdc, UTT 900 Vdc /10 s, UTC 3 000 Vac /10 s, , 700 Vdc, UTT 1 050 Vdc /10 s, UTC 3 000 Vac /10 s, 800 Vdc, UTT 1200 Vdc /10 s, UTC 3 000 Vac /10 s, 900 Vdc, UTT 1350 Vdc /10 s, 1 000 Vdc, UTT 1 500 Vdc /10 s, 1100 Vdc, UTT 1 650 Vdc /10 s, 1 200 Vdc, UTT 1 800 Vdc /10 s, 1 300 Vdc, UTT 1 950 Vdc /10 s, 1 500 Vdc, UTT 2 250 Vdc /10 s, 1 700 Vdc, UTC 4 000 Vac /10 s, 2 000 Vdc, UTT 3 000 Vdc /10 s, 2 200 Vdc, UTT 3300 Vdc /10 s, UTC 4000 Vac /10 s |
| Nominal Capacitance | CN | [μF] | 90-970, 1-5 000, 1-2 100, 1-2 200, 1-3 300, 1 600, 1 800, 1 900, 1-2 400, 1 500 |
| Ripple Current 1kHz at 40 °C | at 40 °C | Ir * | [A RMS] | 46-100 |
| Ripple Current 1kHz at 50 °C | at 50 °C | Ir * | [A RMS] | 40-100 |
| Peak Current | Maximum value | Î | [kA] | 1,08-25 |
| ESR | ESR | [mΩ] | 0,6-4,1 |
| ESL | ESL | [nH] | 50-80 |
| Thermal Resistance | Rth | [K/W] | 2,2-5,6 |
| Case Size | # = variable value, | D x L | [mm] | 76-116x95, 76-116x120, 76-116x136, 76-116x175, 76-116x155, 86x225, 116x230, 116x345, 86x250 |
| at 60 °C | Ir * | [A RMS] | 32-100 |
| at 70 °C | Ir * | [A RMS] | 23-71 |
MKCHS
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
Plėveliniai kondensatoriai elektronikos pramonei
Pirkti plėvelinius kondensatorius
- Didelis plėvelinių kondensatorių pasirinkimas
- Skirti pramonei, aviacijai, medicinos technikai ir dar daugiau
- Patikimas veikimas pramonėje ir elektronikoje
- Efektyvūs "Rotima AG" sprendimai
"AIC Europe" plėveliniai kondensatoriai
Plėveliniai kondensatoriai
MKCA
Plėveliniai kondensatoriai
MKCHA
Plėveliniai kondensatoriai
MKCP4
Plėveliniai kondensatoriai
MKCP4T
Plėveliniai kondensatoriai
MLC
Plėveliniai kondensatoriai
MLC2
Plėveliniai kondensatoriai
MLCA
Plėveliniai kondensatoriai
MKCHS
Ar turite klausimų apie mūsų pasiūlymą?
AIC-Europe plėveliniai kondensatoriai
Mūsų kitų kondensatorių asortimentas:
Elektrolitiniai kondensatoriai
Elektrolitiniai kondensatoriai - tai specialūs didelės talpos kondensatoriai, kuriuose kaip laidi terpė naudojamas elektrolitas. Jie kaupia elektros energiją ir naudojami maitinimo šaltiniuose, garso ir aukšto dažnio grandinėse. Dėl poliškumo juos galima naudoti tik nuolatinės srovės grandinėse. Dažniausiai naudojami aliuminio, tantalo ir niobio elektrolitiniai kondensatoriai.
Keraminiai kondensatoriai
Keraminiai kondensatoriai yra elektros komponentai, skirti energijai kaupti ir signalams filtruoti. Juos sudaro keraminis dielektrikas ir metalinės plokštelės. Jų privalumai: didelis stabilumas, maži nuostoliai, greitas įkrovimo ir iškrovimo laikas. Jie naudojami elektronikoje, aukšto dažnio technologijose ir elektros energijos srityse - nuo išmaniųjų telefonų iki pramoninių valdymo sistemų.
Tantalo kondensatoriai
Tantalo kondensatoriai - tai elektros kondensatoriai, kurių anodo medžiaga yra tantalas. Jiems būdingas didelis talpos tankis, mažos nuotėkio srovės ir stabilios elektrinės savybės. Dažnai naudojami aukšto dažnio ir miniatiūriniuose įrenginiuose, jie patikimai veikia mobiliuosiuose prietaisuose, medicinos technologijose ir pramoninėse grandinėse. Jų oksidinis dielektrikas užtikrina didelį dielektrinį atsparumą ir ilgą tarnavimo laiką.
Ką galime padaryti dėl jūsų?
Susisiekite su mūsų produktų ekspertais
Tobias Nuffer
Vykdantysis direktorius ir pagrindinis buhalteris DE
Ką galime padaryti dėl jūsų?
Susisiekite su mūsų produktų ekspertais
Ar turite klausimų apie:
AIC-Europe plėveliniai kondensatoriai
Tiesiog atsiųskite mums trumpą žinutę ir mes mielai atsakysime į jūsų klausimus telefonu arba el. paštu.
Turite klausimų?
Rašykite mums!
Norite sužinoti daugiau apie mūsų aukštos kokybės gaminius?
Turime didelį sandėlį, trumpus pristatymo terminus ir nemokamą pristatymą!
Nedvejodami kreipkitės į mus, mielaipatarsime asmeniškai.
Nedvejodami kreipkitės į mus, mielaipatarsime asmeniškai.
Jūsų kontaktiniai asmenys
Prašyti atgalinio skambučio
Ar norėtumėte asmeninės konsultacijos telefonu?
Tiesiog užpildykite formą ir mes su jumis susisieksime.
Kokie yra nuolatinės įtampos transformatorių naudojimo privalumai, palyginti su kintamosios įtampos transformatoriais?
Norėdami atsisiųsti šio gaminio duomenų lapą, užpildykite toliau pateiktą formą.
Kokie yra nuolatinės įtampos transformatorių naudojimo privalumai, palyginti su kintamosios įtampos transformatoriais?
Dabar galite spustelėti ir atsisiųsti PDF dokumentus kaip įprasta.
X
