Filmkondensatorer fra AIC-Europe
Vores officielle salgspartner: AIC Europe
AIC Europe er en førende leverandør af elektrolyt- og filmkondensatorer med over 30 års erfaring i branchen. Med en imponerende produktionskapacitet på 90 millioner kondensatorer om året og en FIT-rate på mindre end 0,5 står AIC Europe for højeste kvalitet og pålidelighed.
Sammen med AIC Europe fokuserer vi på innovative teknologier og bæredygtig praksis for at sikre, at dine applikationer bliver en succes.
Sammen med AIC Europe fokuserer vi på innovative teknologier og bæredygtig praksis for at sikre, at dine applikationer bliver en succes.
Bredt produktsortiment af filmkondensatorer
Vores produkter er kendetegnet ved lav ESR og høj rippelstrømskapacitet, hvilket gør dem ideelle til krævende anvendelser. Med høj dielektrisk styrke og lang levetid er vores kondensatorer pålidelige og effektive. De fås som ekstraudstyr med segmenteret film for ekstra sikkerhed.
Vores filmkondensatorer tilbydes i forskellige produktserier, som hver især opfylder specifikke krav. Detaljerede specifikationer for hver serie kan findes på vores hjemmeside.
Vores filmkondensatorer tilbydes i forskellige produktserier, som hver især opfylder specifikke krav. Detaljerede specifikationer for hver serie kan findes på vores hjemmeside.
Filmkondensatorer fra AIC Europe
MKCA
| Rated DC Voltage UN derating | Voltage test between terminals UTT | 450 Vdc at 85°C, 500 Vdc at 70 °C, 300 Vdc at 105 °C, UTT 650 Vdc / 10 s, 700 Vdc at 85°C, 800 Vdc at 70 °C, 500 Vdc at 105 °C, UTT 1050 Vdc / 10 s, 1100 Vdcat 85°C, 1300 Vdc at 70 °C, 800 Vdc at 105 °C, UTT 1650 Vdc / 10 s |
| Nominal Capacitance | CN [μF] | 1-80 |
| Ripple Current | at 70 °C 1 k –10 kHz | Ir [A RMS] | 1,5-23 |
| Peak Current | Maximum value | Î [A] | 50-1500 |
| ESR | ESR [mΩ] | 3,5-80 |
| Thermal Resistance | Rth [K/W] | 7,3-48,7 |
| dv/dt | [V/μs] | 15-70 |
| Dimensions | Case Size | T x H x L [mm] | 11 x 20 x 32, 18 x 33 x 32, 35 x 50 x 42.5, 35 x 50 x 57.5, 9 x 18 x 32, 35 x 60 x 57.5 |
| Terminals | P1 [mm] | 27,5-52,5 |
| P2 [mm] | 20,3 |
| Ød [mm] | 0,8-1,2 |
MKCHA
| Nominal Capacitance | CN | [μF] | 1-170 |
| Ripple Current | at 70 °C 1 k –10 kHz | Ir | [A RMS] | 2-36,4 |
| Peak Current | Maximum value | Î | [A] | 50-2550 |
| ESR | ESR | [mΩ] | 2,5-64 |
| Thermal Resistance | Rth | [K/W] | 2,7-43,5 |
| dv/dt | [V/μs] | 12-80 |
| Terminals | P1 [mm] | 27,5-52,5 |
| Ød [mm] | 0,8-1,2 |
MKCP4
| Rated DC Voltage UN derating | Voltage test between terminals UTT | 450 Vdc at 85°C, 500 Vdc at 70 °C, 300 Vdc at 105 °C, UTT, 650 Vdc / 10 s, , 700 Vdc at 85°C, 800 Vdc at 70 °C, 500 Vdc at 105 °C, 1050 Vdc / 10 s, 900 Vdc at 85°C, 1100 Vdc at 70 °C, 650 Vdc at 105 °C, 1350 Vdc / 10 s, 1100 Vdc at 85°C, 1300 Vdc at 70 °C, 800 Vdc at 105 °C, 1650 Vdc / 10 s |
| Nominal Capacitance | CN | [μF] | 2,5-180 |
| Ripple Current | at 85 °C 1 k –10 kHz | Ir | [A RMS] | 4-25 |
| Peak Current | Maximum value | Î | [A] | 150-920, 1-2 000, 1 200, 1-2 400, 1 600, 1 300, 1 700, 1 800, 2 500, 1 100 |
| ESL | ESL | [nH] | 2,5-35 |
| ESR | ESR | [mΩ] | 14-30 |
| Thermal Resistance | Rth | [K/W] | 6-20 |
| dv/dt | [V/μs] | 14-60 |
| Dimensions | Case Size | L x H x T [mm] | 21,5 x 38.5 x 43, 24 x 44 x 42, 30 x 45 x 42, 30 x 55 x 42, 25-60 x 45 x 57.5, 35 x 50 x 57.5, 35 x 60 x 57.5, 35 x 80 x 57.5, 18 x 32 x 42, 21,5 x 38.5 x 43, 28 x 42.5 x 42, 25-45 x 65 x 57.5, 45 x 57 x 57.5, 20 x 14 x 31.5, 27-45 x 21 x 42, 23 x 34 x 43, 16 x 31 x 41, 35-39 x 24 x 57.5, 27 x 36 x 41, 43 x 22 x 57.5, 29 x 44 x 41, 18 x 32 x 42 |
| Terminals | P1 [mm] | 27,5-52,5 |
| P2 [mm] | 5-20,3 |
| Ød [mm] | 1-1,2 |
MKCP4T
| Rated DC Voltage UN derating | Voltage test between terminals UTT | 450 Vdc at 85°C, 500 Vdc at 70 °C, 300 Vdc at 105 °C, UTT, 650 Vdc / 10 s, , 700 Vdc at 85°C, 800 Vdc at 70 °C, 500 Vdc at 105 °C, 1050 Vdc / 10 s, 900 Vdc at 85°C, 1100 Vdc at 70 °C, 650 Vdc at 105 °C, 1350 Vdc / 10 s, 1100 Vdc at 85°C, 1300 Vdc at 70 °C, 800 Vdc at 105 °C, 1650 Vdc / 10 s |
| Nominal Capacitance | CN | [μF] | 5-120 |
| Ripple Current | at 85 °C 1 k –10 kHz | Ir | [A RMS] | 7,5-22,5 |
| Peak Current | Maximum value | Î | [A] | 225-800, 1-2 000, 1 400, 1 600, 1 200, 1 700, 1 800, 1 100 |
| ESL | ESL | [nH] | 3-16 |
| ESR | ESR | [mΩ] | 18-35 |
| Thermal Resistance | Rth | [K/W] | 7-13 |
| dv/dt | [V/μs] | 20-45 |
| Dimensions | Case Size | L x H x T [mm] | 21,5 x 38.5 x 43, 24 x 44 x 42, 30 x 45 x 42, 30 x 55 x 42, 25-60 x 45 x 57.5, 35 x 50 x 57.5, 35 x 60 x 57.5, 21,5 x 38.5 x 43, 28 x 42.5 x 42, 35 x 80 x 57.5 |
| Terminals | P1 [mm] | 37,5-52,5 |
| P2 [mm] | 10,2-20,3 |
| Ød [mm] | 1-1,2 |
MLC
| Nominal Capacitance | CN | [μF] | 70-990, 1-2 000, 1 100, 1 200, 1-2 300, 1 400, 1 500, 1 700, 1 600, 1 900 |
| Ripple Current | at 50°C 1 k –10 kHz | Ir * | [A RMS] | 22-81 |
| Peak Current | Maximum value | Î | [kA] | 2-24 |
| Surge Current | Maximum value | IS | [kA] | 6-72 |
| ESR | ESR | [mΩ] | 0,8-8,1 |
| ESL | ESL | [nH] | 60, 65, 75, 80, 90, 40, 100, 45, 50, 55, 70 |
| Thermal Resistance | Rth | [K/W] | 8.4, 7.9, 7.8, 7.4, 7.7, 7.0, 6.8, 6.5, 6.4, 6.1, 5.6, 5.9, 5.7, 4.8, 5.4, 6.0, 5.2, 4.5, 4.9, 4.1, 4.2, 4.7, 4.0, 3.8, 5.0, 3.9, 4.3, 3.6, 6.6, 3.4, 3.2, 3.0, 3.5, 5.8, 2.9, 2.7, 3.3, 2.8, 2.6, 5.1, 3.1, 2.5, 2.2, 2.3, 3.7, 2.0, 8.6, 7.6, 8.3, 7.1, 7.5, 6.9, 7.3, 6.2, 6.7, 6.3, 4.6, 4.4, 2.4, 8.1, 8.2, 7.2, 5.5, 5.3, 8.0 |
| Case Size | D x L | [mm] | 85-140x70, 85-140x75, 85-140x80, 85-140x87, 85-140x95, 85-140x106, 85-140x125, 85-140x120, 85-140x135, 85-140x145, 85-140x159, 85-140x175, 85-140x197, 85-140x225, 85x137.5, 88,5-100x155, 85x252, 116x235, 116x140 |
MLC2
| Rated DC Voltage UN | Max ripple Voltage Ur | Non repetitive | Surge Volt. US | 800 VDC, Ripple Voltage 200 V, Surge Voltage 1200 V, , 900 VDC, Surge Voltage 1350 V |
| Nominal Capacitance | CN | [μF] | 230-980, 1-2 000, 1-2 100, 1-2 200, 1-3 300, 1 400, 1-2 500, 1 600, 1 700, 1-3 800, 1-2 900 |
| Ripple Current | at 50°C 1 k –10 kHz | Ir * | [A RMS] | 27-100 |
| Peak Current | Maximum value | Î | [kA] | 4-31 |
| Surge Current | Maximum value | IS | [kA] | 12-93 |
| ESR | ESR | [mΩ] | 0,7-5,1 |
| ESL | ESL | [nH] | 40-100 |
| Thermal Resistance | Rth | [K/W] | 2,1-8,4 |
| Case Size | D x L | [mm] | 85-140x70, 85-140x75, 85-140x80, 85-140x87, 85-140x95, 85-140x106, 85-140x125, 85-140x120, 85-140x135, 85-140x145, 85-140x159, 85-140x175, 85-140x197, 85-140x225 |
MLCA
| Rated DC Voltage UN | Test Voltage between | terminals UTT | terminals & case UTC | 600 Vdc, UTT 900 Vdc /10 s, UTC 3 000 Vac /10 s, , 700 Vdc, UTT 1 050 Vdc /10 s, UTC 3 000 Vac /10 s, 800 Vdc, UTT 1200 Vdc /10 s, UTC 3 000 Vac /10 s, 900 Vdc, UTT 1350 Vdc /10 s, 1 000 Vdc, UTT 1 500 Vdc /10 s, 1100 Vdc, UTT 1 650 Vdc /10 s, 1 200 Vdc, UTT 1 800 Vdc /10 s, 1 300 Vdc, UTT 1 950 Vdc /10 s, 1 500 Vdc, UTT 2 250 Vdc /10 s, 1 700 Vdc, UTC 4 000 Vac /10 s, 2 000 Vdc, UTT 3 000 Vdc /10 s, 2 200 Vdc, UTT 3300 Vdc /10 s, UTC 4000 Vac /10 s |
| Nominal Capacitance | CN | [μF] | 90-970, 1-5 000, 1-2 100, 1-2 200, 1-3 300, 1 600, 1 800, 1 900, 1-2 400, 1 500 |
| Ripple Current 1kHz at 40 °C | at 40 °C | Ir * | [A RMS] | 46-100 |
| Ripple Current 1kHz at 50 °C | at 50 °C | Ir * | [A RMS] | 40-100 |
| Peak Current | Maximum value | Î | [kA] | 1,08-25 |
| ESR | ESR | [mΩ] | 0,6-4,1 |
| ESL | ESL | [nH] | 50-80 |
| Thermal Resistance | Rth | [K/W] | 2,2-5,6 |
| Case Size | # = variable value, | D x L | [mm] | 76-116x95, 76-116x120, 76-116x136, 76-116x175, 76-116x155, 86x225, 116x230, 116x345, 86x250 |
| at 60 °C | Ir * | [A RMS] | 32-100 |
| at 70 °C | Ir * | [A RMS] | 23-71 |
MKCHS
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
| Temperature range | -40 °C ~ + 105 °C |
| Rated Voltage UN | 450 ~ 2 000 Vdc at 85 °C (other available on request) |
| Capacitance | 200 μF ~ 2000 μF at 100 Hz (other available on request) |
| Capacitance tolerance | +/- 5 % ... +/- 10 % at 20 °C, 50 –120 Hz |
| Voltage derating | specific derating beginning by THOTSPOT = 85 °C |
| Current derating | specific derating depending from inner design |
Filmkondensatorer til elektronikindustrien
Køb filmkondensatorer
- Stort udvalg af filmkondensatorer
- Til industri, luftfart, medicinsk teknologi og meget mere
- Pålidelig funktion i industri og elektronik
- Effektive løsninger fra Rotima AG
Filmkondensatorer fra AIC Europe
Filmkondensatorer
MKCA
Filmkondensatorer
MKCHA
Filmkondensatorer
MKCP4
Filmkondensatorer
MKCP4T
Filmkondensatorer
MLC
Filmkondensatorer
MLC2
Filmkondensatorer
MLCA
Filmkondensatorer
MKCHS
Har du spørgsmål til vores tilbud?
Filmkondensatorer fra AIC-Europe
Vores udvalg af andre kondensatorer:
Elektrolytiske kondensatorer
Elektrolytkondensatorer er specielle kondensatorer med høj kapacitans, der bruger en elektrolyt som ledende medium. De lagrer elektrisk energi og bruges i strømforsyninger, lyd- og højfrekvente kredsløb. På grund af deres polaritet kan de kun bruges i jævnstrømskredsløb. Almindelige typer er elektrolytiske kondensatorer af aluminium, tantal og niobium.
Keramiske kondensatorer
Keramiske kondensatorer er elektriske komponenter til energilagring og signalfiltrering. De består af et keramisk dielektrikum og metalplader. Deres fordele: høj stabilitet, lave tab, hurtige opladnings- og afladningstider. De bruges i elektronik, højfrekvensteknologi og strømforsyningsapplikationer - fra smartphones til industrielle kontrolsystemer.
Tantal-kondensatorer
Tantal-kondensatorer er elektriske kondensatorer med tantal som anodemateriale. De er kendetegnet ved høj kapacitetstæthed, lave lækstrømme og stabile elektriske egenskaber. De bruges ofte i højfrekvens- og miniatureapplikationer og giver pålidelig ydeevne i mobile enheder, medicinsk teknologi og industrielle kredsløb. Deres oxiddielektrikum sikrer høj dielektrisk styrke og lang levetid.
Hvad kan vi gøre for dig?
Kontakt vores produkteksperter
Hvad kan vi gøre for dig?
Kontakt vores produkteksperter
Har du nogen spørgsmål om:
Filmkondensatorer fra AIC-Europe
Send os blot en kort besked, og vi vil med glæde besvare dine spørgsmål via telefon eller e-mail.
Har du spørgsmål?
Skriv til os!
Vil du gerne vide mere om vores kvalitetsprodukter?
Vi har et stort lager, korte leveringstider og toldfri levering !
Tøv ikke med at kontakte os, vi rådgiver dig gerne personligt.
Tøv ikke med at kontakte os, vi rådgiver dig gerne personligt.
Dine kontaktpersoner
Anmod om et tilbagekald
Vil du gerne have en personlig telefonkonsultation?
Du skal blot udfylde formularen, så vender vi tilbage til dig.
Hvad er fordelene ved at bruge DC-spændingstransformere frem for AC-spændingstransformere?
Hvad er fordelene ved at bruge DC-spændingstransformere frem for AC-spændingstransformere?
X
