Power Inductors
Naš uradni prodajni partner: Hongda Capacitors
Hongda Capacitors je eden od vodilnih proizvajalcev kondenzatorjev s čipi z desetletji izkušenj in najsodobnejšo proizvodno tehnologijo. Podjetje ima certifikata ISO9001:2015 in IATF16949 ter zastopa najvišje standarde kakovosti v avtomobilskem, elektronskem in industrijskem sektorju.
Kot uradni distribucijski partner podjetja Hongda Capacitors svojim strankam ponujamo visoko zmogljive kondenzatorje, ki jih odlikujejo zanesljivost, vzdržljivost in inovativna tehnologija.
Kot uradni distribucijski partner podjetja Hongda Capacitors svojim strankam ponujamo visoko zmogljive kondenzatorje, ki jih odlikujejo zanesljivost, vzdržljivost in inovativna tehnologija.
Paleta izdelkov naših močnostnih induktorjev
Naši močnostni induktorji zagotavljajo največjo učinkovitost in zanesljivost za široko paleto aplikacij v elektroniki. Od večplastnih induktorjev s čipi za kompaktne zasnove do oblikovanih induktorjev različnih velikosti in žično navitih induktorjev za visoke tokove - za vsako zahtevo ponudimo pravo rešitev.
Zahvaljujoč našemu partnerstvu s podjetjem Hongda Capacitors boste prejeli visokokakovostne komponente z optimiziranimi električnimi lastnostmi in dolgotrajnim delovanjem. Podrobne tehnične specifikacije in podatkovne liste najdete v naslednjih preglednicah.
Zahvaljujoč našemu partnerstvu s podjetjem Hongda Capacitors boste prejeli visokokakovostne komponente z optimiziranimi električnimi lastnostmi in dolgotrajnim delovanjem. Podrobne tehnične specifikacije in podatkovne liste najdete v naslednjih preglednicah.
Vse izdelke za naše induktorje najdete tudi v našem katalogu:
HDFL Series (Ferrite) - Multilayer Chip Inductor
HDFL1608
| Inductance | (uH)±20% | 1-22 |
| L Test Freq. | (MHz) | 1 |
| SRF (MHz) | Min. | 15-125 |
| DCR (Ω) | ±30% | 0,18-1 |
| Irms(mA) | Max. | 200-1000 |
HDFL2012
| Inductance | (uH) ±30% | 1,5-10 |
| DCR (Ω) | Max. | 0,07-0,4 |
| Isat | (A) | 0,35-0,9 |
| Irms | (A) | 0,65-1,48 |
HDFL2012UF
| Inductance | (uH)±20% | 1-4,7 |
| L Test Freq. | (MHz) | 1 |
| DCR (Ω) | ±30% | 0,15-0,25 |
| Isat (mA) | Max. | 200-600 |
| Irms (mA) | Max. | 1000-1400 |
HDFL2016F
| Inductance | (uH)±20% | 1-4,7 |
| L Test Freq. | (MHz) | 1 |
| SRF (MHz) | Min. | 20-60 |
| DCR (Ω) | ±30% | 0,11-0,25 |
| Irms (mA) | Max. | 1100-1400 |
HDFL2016UF
| Inductance | (uH)±20% | 1-4,7 |
| L Test Freq. | (MHz) | 1 |
| DCR (Ω) | ±30% | 0,11-0,25 |
| Isat (mA) | Max. | 220-1200 |
| Irms (mA) | Max. | 1100-1400 |
HDFL2520F
| Inductance | (uH)±20% | 1-4,7 |
| L Test Freq. | (MHz) | 1 |
| SRF (MHz) | Min. | 20-60 |
| DCR (Ω) | ±30% | 0,1-0,25 |
| Irms (mA) | Max. | 1300-1600 |
HDFL2520UF
| Inductance | (uH)±20% | 1-4,7 |
| L Test Freq. | (MHz) | 1 |
| DCR (Ω) | ±30% | 0,11-0,25 |
| Isat (mA) | Max. | 300-1000 |
| Irms (mA) | Max. | 1300-1600 |
HPIM Series - Small Size Molding Inductor
HPIM201610H
| Inductance | (uH) | 0,24-2,2 ±20% |
| DCR (Ω) | Max. | 0,03-0,17 |
| Isat(A) | Max. | 1,8-5,4 |
| Irms (A) | Max. | 1,4-3,8 |
| Typ. | 0,02-0,15 |
| Typ. | 2,15-6 |
| Typ. | 1,6-4,15 |
HPIM201610E
| Inductance | (uH) | 0,24-1±20% |
| DCR (Ω) | Max. | 0,02-0,05 |
| Isat(A) | Max. | 4-5,8 |
| Irms(A) | Max. | 3,5-4,4 |
| Typ. | 0,02-0,05 |
| Typ. | 4,4-6,3 |
| Typ. | 3,7-4,8 |
HPIM252010H
| Inductance | (uH) | 0,22-2,2 ±20% |
| DCR (Ω) | Max. | 0,02-0,12 |
| Isat(A) | Max. | 2,4-6,5 |
| Irms(A) | Max. | 1,7-5 |
| Typ. | 0,01-0,11 |
| Typ. | 2,7-6,9 |
| Typ. | 2-5,4 |
HPIM252010E
| Inductance | (uH) | 0,24-1±20% |
| DCR (Ω) | Max. | 0,02-0,05 |
| Isat(A) | Max. | 4,1-8,5 |
| Irms(A) | Max. | 3,1-5,7 |
| Typ. | 0,01-0,04 |
| Typ. | 4,5-8,9 |
| Typ. | 3,4-5,9 |
HAPM Series - Big Size Molding Inductor
HAPM0420
| Inductance | (uH)±20% | 0,47-10 |
| DCR (mΩ) | Max. | 14-200 |
| Isat(A) | Typ. | 2-9,5 |
| Irms(A) | Typ. | 1,5-7 |
HAPM0530
| Inductance | (uH)±20% | 0,47-10 |
| DCR (mΩ) | Max. | 8,5-130 |
| Isat(A) | Typ. | 3,7-16 |
| Irms(A) | Typ. | 3,1-12 |
HAPM0630
| Inductance | (uH)±20% | 0,47-22 |
| DCR (mΩ) | Max. | 4,5-167 |
| Isat(A) | Typ. | 3-25 |
| Irms(A) | Typ. | 2,5-17,5 |
HAPM1040
| Inductance | (uH)±20% | 1-22 |
| DCR (mΩ) | Max. | 4,7-72 |
| Isat(A) | Typ. | 5-28 |
| Irms(A) | Typ. | 3-18 |
HAPM1335
| Inductance | (uH)±20% | 0,5-22 |
| DCR (mΩ) | Max. | 2-90 |
| Isat(A) | Typ. | 4,5-55 |
| Irms(A) | Typ. | 3-32 |
HAPM1350
| Inductance | (uH)±20% | 0,5-10 |
| DCR (mΩ) | Max. | 1,3-26 |
| Isat(A) | Typ. | 16-65 |
| Irms(A) | Typ. | 9-38 |
HPIA/MPIAL Series - Wire Wound Type Inductor
HPIA201608
| Inductance | (uH) | 0,24-2,2 ±20% |
| DCR (Ω) | Max. | 0,04-0,26 |
| Isat(A) | Max. | 1,2-4,3 |
| Irms(A) | Max. | 1,1-2,8 |
| Typ. | 0,03-0,21 |
| Typ. | 1,5-5 |
| Typ. | 1,2-3,05 |
HPIAL201608
| Inductance | (uH) | 0,24-2,2 ±20% |
| DCR (Ω) | Max. | 0,04-0,28 |
| Isat(A) | Max. | 1,6-5,5 |
| Irms(A) | Max. | 1,05-2,7 |
| Typ. | 0,03-0,23 |
| Typ. | 2-6,5 |
| Typ. | 1,15-3 |
HPIA252008
| Inductance | (uH) | 0,24-10 ±20% |
| DCR (Ω) | Max. | 0,04-1,29 |
| Isat(A) | Max. | 0,8-6,5 |
| Irms(A) | Max. | 0,43-2,3 |
| Typ. | 0,04-1,08 |
| Typ. | 1,2-8 |
| Typ. | 0,5-2,5 |
HPIA201610
| Inductance | (uH) | 0,24-4,7 ±20% |
| DCR (Ω) | Max. | 0,03-0,43 |
| Isat(A) | Max. | 1-5 |
| Irms(A) | Max. | 0,9-4 |
| Typ. | 0,03-0,38 |
| Typ. | 1,3-5,5 |
| Typ. | 1-4,8 |
HPIAL201610
| Inductance | (uH) | 0,24-4,7 ±20% |
| DCR (Ω) | Max. | 0,03-0,43 |
| Isat(A) | Max. | 1,4-5,9 |
| Irms(A) | Max. | 0,95-4,35 |
| Typ. | 0,02-0,36 |
| Typ. | 1,6-7 |
| Typ. | 1,05-4,8 |
HPIA252010
| Inductance | (uH) | 0,24-10 ±20% |
| DCR (Ω) | Max. | 0,03-0,6 |
| Isat(A) | Max. | 0,95-6 |
| Irms(A) | Max. | 0,9-4,5 |
| Typ. | 0,02-0,5 |
| Typ. | 1,1-6,55 |
| Typ. | 1-5 |
HPIAL252010
| Inductance | (uH) | 0,24-4,7 ±20% |
| DCR (Ω) | Max. | 0,02-0,26 |
| Isat(A) | Max. | 1,8-8 |
| Irms(A) | Max. | 1,35-5,25 |
| Typ. | 0,02-0,21 |
| Typ. | 2,1-9,5 |
| Typ. | 1,5-5,7 |
HPIA252012
| Inductance | (uH) | 0,24-10 ±20% |
| DCR (Ω) | Max. | 0,03-0,45 |
| Isat(A) | Max. | 1,3-6,3 |
| Irms(A) | Max. | 0,7-4,3 |
| Typ. | 0,02-0,4 |
| Typ. | 1,5-7 |
| Typ. | 0,8-4,7 |
HPIA3012
| Inductance | (uH) | 0,47-10 ±20% |
| DCR (Ω) | Max. | 0,03-0,44 |
| Isat(A) | Max. | 1,55-7 |
| Irms(A) | Max. | 1,1-4 |
| Typ. | 0,03-0,37 |
| Typ. | 1,9-8,5 |
| Typ. | 1,25-4,5 |
HPIA3015
| Inductance | (uH) | 0,47-10 ±20% |
| DCR (Ω) | Max. | 0,03-0,32 |
| Isat(A) | Max. | 1,5-7,5 |
| Irms(A) | Max. | 1,35-4,6 |
| Typ. | 0,03-0,27 |
| Typ. | 1,8-9 |
| Typ. | 1,5-5 |
HPIE Series - Wire Wound Type Inductor
HPIE201608
| Inductance | (uH) | 0,24-4,7 ±20% |
| DCR (Ω) | Max. | 0,04-0,5 |
| Isat(A) | Max. | 0,8-4,1 |
| Irms(A) | Max. | 0,74-2,6 |
| Typ. | 0,04-0,42 |
| Typ. | 1-4,5 |
| Typ. | 0,8-2,85 |
HPIE201610
| Inductance | (uH) | 0,24-22 ±20% |
| DCR (Ω) | Max. | 0,03-1,75 |
| Isat(A) | Max. | 0,4-4,5 |
| Irms(A) | Max. | 0,36-4,5 |
| Typ. | 0,02-1,46 |
| Typ. | 0,5-4,85 |
| Typ. | 0,4-5 |
HPIE252008
| Inductance | (uH) | 0,24-10 ±20% |
| DCR (Ω) | Max. | 0,04-0,96 |
| Isat(A) | Max. | 0,43-3 |
| Irms(A) | Max. | 0,46-2,2 |
| Typ. | 0,03-0,8 |
| Typ. | 0,48-3,2 |
| Typ. | 0,5-2,43 |
HPIE252010
| Inductance | (uH) | 0,24-15 ±20% |
| DCR (Ω) | Max. | 0,03-0,99 |
| Isat(A) | Max. | 0,5-4 |
| Irms(A) | Max. | 0,45-3,9 |
| Typ. | 0,02-0,83 |
| Typ. | 0,6-5,5 |
| Typ. | 0,5-4,3 |
HPIH Series - Wire Wound Type Inductor
HPIH201610
| Inductance | (uH) | 0,24-10 ±20% |
| DCR (Ω) | Max. | 0,03-0,82 |
| Isat(A) | Max. | 0,6-3,8 |
| Irms(A) | Max. | 0,6-3,7 |
| Typ. | 0,03-0,68 |
| Typ. | 0,65-4,2 |
| Typ. | 0,7-4,3 |
HPIH252010
| Inductance | (uH) | 0,47-4,7 ±20% |
| DCR (Ω) | Max. | 0,04-0,33 |
| Isat(A) | Max. | 1,15-3,4 |
| Irms(A) | Max. | 1-3,2 |
| Typ. | 0,04-0,28 |
| Typ. | 1,25-3,6 |
| Typ. | 1,1-3,5 |
HPIH252012
| Inductance | (uH) | 0,24-10 ±20% |
| DCR (Ω) | Max. | 0,03-0,45 |
| Isat(A) | Max. | 1,3-6,3 |
| Irms(A) | Max. | 0,7-4,3 |
| Typ. | 0,02-0,4 |
| Typ. | 1,5-7 |
| Typ. | 0,8-4,7 |
HPIT Serien - močnostni induktor tipa Wire Wound(NR)
HPIT252010
| Inductance | (uH) | 0,47-47 ±20% |
| DCR (Ω) | Max. | 0,06-2,4 |
| Isat(A) | Max. | 0,28-3,2 |
| Irms(A) | Max. | 0,28-2,43 |
| Typ. | 0,05-2 |
| Typ. | 0,35-3,4 |
| Typ. | 0,35-2,7 |
HPIT252012
| Inductance | (uH) | 0,47-22 ±20% |
| DCR (Ω) | Max. | 0,04-1,15 |
| DCR (Ω) | Typ. | 0,03-0,96 |
| Isat(A) | Max. | 0,5-3,8 |
| Isat(A) | Typ. | 0,55-4,2 |
| Irms(A) | Max. | 0,5-3 |
| Irms(A) | Typ. | 0,6-3,3 |
HPIT3010
| Inductance | (uH) | 0,56-33 ±20% |
| DCR (Ω) | Max. | 0,05-1,2 |
| Isat(A) | Max. | 0,3-2,5 |
| Irms(A) | Max. | 0,3-2 |
| Typ. | 0,04-1 |
| Typ. | 0,4-2,8 |
| Typ. | 0,4-2,15 |
HPIT3012
| Inductance | (uH) | 0,47-47 ±20% |
| DCR (Ω) | Max. | 0,03-1560 |
| Isat(A) | Max. | 1,25-90 |
| Irms(A) | Max. | 1,5-105 |
| Typ. | 0,03-1300 |
| Typ. | 1,45-105 |
| Typ. | 1,7-115 |
HPIT3015
| Inductance | (uH) | 0,22-100 ±20% |
| DCR (Ω) | Max. | 0,01-4,04 |
| Isat(A) | Max. | 0,23-6,5 |
| Irms(A) | Max. | 0,21-6 |
| Typ. | 0,01-3,11 |
| Typ. | 0,25-6,9 |
| Typ. | 0,25-6,5 |
HPIT4012
| Inductance | (uH) | 0,82-100 ±20% |
| DCR (Ω) | Max. | 0,07-3,6 |
| Isat(A) | Max. | 0,3-3,45 |
| Irms(A) | Max. | 0,28-2 |
| Typ. | 0,05-3 |
| Typ. | 0,35-3,65 |
| Typ. | 0,3-2,2 |
HPIT4018
| Inductance | (uH) | 0,24-220 ±20% |
| DCR (Ω) | Max. | 0,02-3,6 |
| Isat(A) | Max. | 0,3-6,5 |
| Irms(A) | Max. | 0,21-4,6 |
| Typ. | 0,01-3 |
| Typ. | 0,34-7 |
| Typ. | 0,23-5 |
HPIT4030
| Inductance | (uH) | 0,91-330 ±20% |
| DCR (Ω) | Max. | 0,02-4,08 |
| Isat(A) | Max. | 0,3-7 |
| Irms(A) | Max. | 0,27-4,15 |
| Typ. | 0,01-3,4 |
| Typ. | 0,38-8 |
| Typ. | 0,3-4,7 |
HPIT5020
| Inductance | (uH) | 0,47-0,68 ±30%, 1-100 ±20% |
| DCR (Ω) | Max. | 16-1430 |
| Isat (A) | Max. | 55-800 |
| Typ. | 12-1100 |
| Typ. | 60-840 |
HPIT5040
| Inductance | (uH) | 1-100 ±20% |
| DCR (Ω) | Max. | 15-660 |
| Isat (A) | Max. | 85-820 |
| Typ. | 12-550 |
| Typ. | 100-860 |
HPIT6045
| Inductance | (uH) | 0,82-1000 ±20% |
| DCR (Ω) | Max. | 0,01-5,65 |
| Isat(A) | Max. | 0,4-13 |
| Irms(A) | Max. | 0,3-6,5 |
| Typ. | 0,01-4,7 |
| Typ. | 0,45-15 |
| Typ. | 0,35-7,5 |
HPIT8040
| Inductance | (uH) | 0,47-0,68 ±30%, 0,82-330 ±20% |
| DCR (Ω) | Max. | 0,01-1,07 |
| Isat(A) | Max. | 0,7-16,5 |
| Irms(A) | Max. | 0,65-8 |
| SRF | (MHz) | 2,8-110 |
| Typ. | 0,01-0,82 |
HPIT8065
| Inductance | (uH) | 1-6800 ±20% |
| DCR (Ω) | Max. | 0,01-22,2 |
| Isat(A) | Max. | 0,28-20 |
| Irms(A) | Max. | 0,15-7,3 |
| Typ. | 0,01-18,5 |
| Typ. | 0,31-22 |
| Typ. | 0,17-8 |
Močnostni induktorji za visokofrekvenčne aplikacije
Nakup napajalnih induktorjev
- Učinkovit prenos energije
- Vsestranske zasnove za vsako uporabo
- Vsestranska uporaba
- Kakovost z močnim partnerstvom
Področja uporabe močnostnih induktorjev
Močnostni induktorji so bistveni sestavni deli sodobne elektronike, saj uravnavajo tokovne tokove, shranjujejo energijo in zmanjšujejo elektromagnetne motnje. Zlasti v stikalnih napajalnikih zagotavljajo stabilno napajanje in zmanjšujejo izgube energije. Pretvorniki DC-DC jih uporabljajo za učinkovito pretvorbo napetosti, kar je ključnega pomena za aplikacije v mobilnih napravah, industrijski elektroniki in avtomobilski tehnologiji.
Veliki induktorji se uporabljajo v močnostni elektroniki za zanesljivo obdelavo velikih tokov, majhni induktorji pa so idealni za kompaktne zasnove v napravah interneta stvari ali senzorjih. Induktorji, naviti na žico, zagotavljajo visoko učinkovitost v aplikacijah z visoko močjo, kot so polnilci za električna vozila ali medicinski pripomočki.
Zahvaljujoč visokokakovostnim izdelkom iz podjetja Hongda Capacitors družba Rotima AG dobavlja močnostne induktorje za številne industrije - optimizirane za dolgo življenjsko dobo, nizke izgube in največjo učinkovitost.
Veliki induktorji se uporabljajo v močnostni elektroniki za zanesljivo obdelavo velikih tokov, majhni induktorji pa so idealni za kompaktne zasnove v napravah interneta stvari ali senzorjih. Induktorji, naviti na žico, zagotavljajo visoko učinkovitost v aplikacijah z visoko močjo, kot so polnilci za električna vozila ali medicinski pripomočki.
Zahvaljujoč visokokakovostnim izdelkom iz podjetja Hongda Capacitors družba Rotima AG dobavlja močnostne induktorje za številne industrije - optimizirane za dolgo življenjsko dobo, nizke izgube in največjo učinkovitost.
Imate vprašanja o naši ponudbi?
Power Inductors
HDFL Series (Ferrite) - Multilayer Chip Inductor
Power Inductors
HDFL1608
| HONGDA Part No. | Inductance | L Test Freq. | SRF (MHz) | DCR (Ω) | Irms(mA) |
|---|---|---|---|---|---|
| (uH)±20% | (MHz) | Min. | ±30% | Max. | |
| HDFL1608F1R0 □ | 1.0 | 1 | 125 | 0.18 | 1000 |
| HDFL1608F1R5 □ | 1.5 | 1 | 109 | 0.22 | 800 |
| HDFL1608F2R2 □ | 2.2 | 1 | 90 | 0.30 | 700 |
| HDFL1608F3R3 □ | 3.3 | 1 | 70 | 0.40 | 600 |
| HDFL1608F4R7 □ | 4.7 | 1 | 50 | 0.50 | 500 |
| HDFL1608F6R8 □ | 6.8 | 1 | 40 | 0.75 | 400 |
| HDFL1608F100 □ | 10.0 | 1 | 33 | 0.80 | 400 |
| HDFL1608F150 □ | 15.0 | 1 | 20 | 0.90 | 220 |
| HDFL1608F220 □ | 22.0 | 1 | 15 | 1.00 | 200 |
Power Inductors
HDFL2012
| HONGDA Part No. | Inductance | DCR (Ω) | Isat | Irms |
|---|---|---|---|---|
| (uH) ±30% | Max. | (A) | (A) | |
| HDSFD2D11-1R5N-LF | 1.5 | 0.068 | 0.90 | 1.48 |
| HDSFD2D11-2R2N-LF | 2.2 | 0.098 | 0.78 | 1.27 |
| HDSFD2D11-3R3N-LF | 3.3 | 0.123 | 0.60 | 1.02 |
| HDSFD2D11-4R7N-LF | 4.7 | 0.170 | 0.50 | 0.88 |
| HDSFD2D11-6R8N-LF | 6.8 | 0.260 | 0.44 | 0.80 |
| HDSFD2D11-100N-LF | 10 | 0.400 | 0.35 | 0.65 |
Power Inductors
HDFL2012UF
| HONGDA Part No. | Inductance | L Test Freq. | DCR (Ω) | Isat (mA) | Irms (mA) |
|---|---|---|---|---|---|
| (uH)±20% | (MHz) | ±30% | Max. | Max. | |
| HDFL2012UF1R0 □ | 1.0 | 1 | 0.15 | 600 | 1400 |
| HDFL2012UF1R5 □ | 1.5 | 1 | 0.16 | 450 | 1300 |
| HDFL2012UF2R2 □ | 2.2 | 1 | 0.20 | 350 | 1200 |
| HDFL2012UF3R3 □ | 3.3 | 1 | 0.22 | 220 | 1100 |
| HDFL2012UF4R7 □ | 4.7 | 1 | 0.25 | 200 | 1000 |
Power Inductors
HDFL2016F
| HONGDA Part No. | Inductance | L Test Freq. | SRF (MHz) | DCR (Ω) | Irms (mA) |
|---|---|---|---|---|---|
| (uH)±20% | (MHz) | Min. | ±30% | Max. | |
| HDFL2016F1R0 □ | 1.0 | 1 | 60 | 0.11 | 1400 |
| HDFL2016F1R5 □ | 1.5 | 1 | 50 | 0.15 | 1200 |
| HDFL2016F2R2 □ | 2.2 | 1 | 40 | 0.15 | 1200 |
| HDFL2016F3R3 □ | 3.3 | 1 | 30 | 0.20 | 1200 |
| HDFL2016F4R7 □ | 4.7 | 1 | 20 | 0.25 | 1100 |
Power Inductors
HDFL2016UF
| HONGDA Part No. | Inductance | L Test Freq. | DCR (Ω) | Isat (mA) | Irms (mA) |
|---|---|---|---|---|---|
| (uH)±20% | (MHz) | ±30% | Max. | Max. | |
| HDFL2016UF1R0 □ | 1.0 | 1 | 0.11 | 1200 | 1400 |
| HDFL2016UF1R5 □ | 1.5 | 1 | 0.15 | 700 | 1200 |
| HDFL2016UF2R2 □ | 2.2 | 1 | 0.15 | 500 | 1200 |
| HDFL2016UF3R3 □ | 3.3 | 1 | 0.20 | 330 | 1200 |
| HDFL2016UF4R7 □ | 4.7 | 1 | 0.25 | 220 | 1100 |
Power Inductors
HDFL2520F
| HONGDA Part No. | Inductance | L Test Freq. | SRF (MHz) | DCR (Ω) | Irms (mA) |
|---|---|---|---|---|---|
| (uH)±20% | (MHz) | Min. | ±30% | Max. | |
| HDFL2520F1R0 □ | 1.0 | 1 | 60 | 0.10 | 1600 |
| HDFL2520F1R5 □ | 1.5 | 1 | 50 | 0.11 | 1500 |
| HDFL2520F2R2 □ | 2.2 | 1 | 40 | 0.12 | 1500 |
| HDFL2520F3R3 □ | 3.3 | 1 | 30 | 0.15 | 1300 |
| HDFL2520F4R7 □ | 4.7 | 1 | 20 | 0.25 | 1300 |
Power Inductors
HDFL2520UF
| HONGDA Part No. | Inductance | L Test Freq. | DCR (Ω) | Isat (mA) | Irms (mA) |
|---|---|---|---|---|---|
| (uH)±20% | (MHz) | ±30% | Max. | Max. | |
| HDFL2520UF1R0 □ | 1.0 | 1 | 0.11 | 1000 | 1600 |
| HDFL2520UF1R5 □ | 1.5 | 1 | 0.12 | 800 | 1500 |
| HDFL2520UF2R2 □ | 2.2 | 1 | 0.14 | 600 | 1500 |
| HDFL2520UF4R7 □ | 4.7 | 1 | 0.25 | 300 | 1300 |
HPIM Series - Small Size Molding Inductor
Power Inductors
HPIM201610H
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms (A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIM201610HR22M-LF | 0.24 ±20% | 0.026 | 0.022 | 5.40 | 6.00 | 3.80 | 4.15 |
| HPIM201610HR33M-LF | 0.33 ±20% | 0.034 | 0.029 | 4.70 | 5.20 | 3.50 | 3.85 |
| HPIM201610HR47M-LF | 0.47 ±20% | 0.040 | 0.036 | 4.00 | 4.50 | 3.10 | 3.40 |
| HPIM201610HR68M-LF | 0.68 ±20% | 0.054 | 0.048 | 3.60 | 4.00 | 2.60 | 2.90 |
| HPIM201610H1R0M-LF | 1.0 ±20% | 0.070 | 0.064 | 3.10 | 3.40 | 2.20 | 2.60 |
| HPIM201610H1R5M-LF | 1.5 ±20% | 0.110 | 0.100 | 2.40 | 2.70 | 1.80 | 2.05 |
| HPIM201610H2R2M-LF | 2.2 ±20% | 0.168 | 0.154 | 1.80 | 2.15 | 1.40 | 1.60 |
Power Inductors
HPIM201610E
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIM201610ER24M-LF | 0.24±20% | 0.022 | 0.018 | 5.80 | 6.30 | 4.40 | 4.80 |
| HPIM201610ER47M-LF | 0.47±20% | 0.030 | 0.025 | 5.00 | 5.40 | 4.00 | 4.30 |
| HPIM201610E1R0M-LF | 1.0±20% | 0.054 | 0.045 | 4.00 | 4.40 | 3.50 | 3.70 |
Power Inductors
HPIM252010H
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIM252010HR22M-LF | 0.22 ±20% | 0.015 | 0.014 | 6.50 | 6.90 | 5.00 | 5.40 |
| HPIM252010HR33M-LF | 0.33 ±20% | 0.024 | 0.020 | 5.70 | 6.20 | 4.20 | 4.50 |
| HPIM252010HR47M-LF | 0.47 ±20% | 0.032 | 0.028 | 5.00 | 5.50 | 3.60 | 3.90 |
| HPIM252010HR68M-LF | 0.68 ±20% | 0.048 | 0.044 | 4.10 | 4.60 | 3.00 | 3.30 |
| HPIM252010H1R0M-LF | 1.0 ±20% | 0.054 | 0.048 | 3.80 | 4.20 | 2.70 | 3.00 |
| HPIM252010H1R5M-LF | 1.5 ±20% | 0.082 | 0.075 | 3.00 | 3.40 | 2.10 | 2.40 |
| HPIM252010H2R2M-LF | 2.2 ±20% | 0.115 | 0.107 | 2.40 | 2.70 | 1.70 | 2.00 |
Power Inductors
HPIM252010E
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIM252010ER24M-LF | 0.24±20% | 0.015 | 0.013 | 8.50 | 8.90 | 5.70 | 5.90 |
| HPIM252010ER47M-LF | 0.47±20% | 0.027 | 0.022 | 6.00 | 6.60 | 4.40 | 4.80 |
| HPIM252010E1R0M-LF | 1.0±20% | 0.048 | 0.041 | 4.10 | 4.50 | 3.10 | 3.40 |
HAPM Series - Big Size Molding Inductors
Power Inductors
HAPM0420
| HONGDA Part No. | Inductance | DCR (mΩ) | Isat(A) | Irms(A) |
|---|---|---|---|---|
| (uH)±20% | Max. | Typ. | Typ. | |
| HAPM0420F-R47M-LF | 0.47 | 14 | 9.5 | 7.0 |
| HAPM0420F-1R0M-LF | 1.0 | 27 | 7.0 | 4.5 |
| HAPM0420F-1R5M-LF | 1.5 | 40 | 6.5 | 4.0 |
| HAPM0420F-2R2M-LF | 2.2 | 52 | 4.5 | 3.4 |
| HAPM0420F-4R7M-LF | 4.7 | 125 | 3.2 | 2.1 |
| HAPM0420F-6R8M-LF | 6.8 | 170 | 2.7 | 1.7 |
| HAPM0420F-100M-LF | 10.0 | 200 | 2.0 | 1.5 |
Power Inductors
HAPM0530
| HONGDA Part No. | Inductance | DCR (mΩ) | Isat(A) | Irms(A) |
|---|---|---|---|---|
| (uH)±20% | Max. | Typ. | Typ. | |
| HAPM0530F-R47M-LF | 0.47 | 8.5 | 16.0 | 12.0 |
| HAPM0530F-R56M-LF | 0.56 | 9.0 | 15.0 | 11.2 |
| HAPM0530F-R68M-LF | 0.68 | 10.5 | 13.0 | 10.2 |
| HAPM0530F-1R0M-LF | 1.00 | 12.5 | 11.0 | 9.5 |
| HAPM0530F-1R5M-LF | 1.50 | 22.0 | 9.0 | 6.5 |
| HAPM0530F-2R2M-LF | 2.20 | 25.0 | 8.5 | 6.2 |
| HAPM0530F-3R3M-LF | 3.30 | 35.0 | 7.2 | 5.2 |
| HAPM0530F-4R7M-LF | 4.70 | 54.0 | 6.0 | 4.5 |
| HAPM0530F-6R8M-LF | 6.80 | 85.0 | 4.5 | 3.7 |
| HAPM0530F-100M-LF | 10.00 | 130.0 | 3.7 | 3.1 |
Power Inductors
HAPM0630
| HONGDA Part No. | Inductance | DCR (mΩ) | Isat(A) | Irms(A) |
|---|---|---|---|---|
| (uH)±20% | Max. | Typ. | Typ. | |
| HAPM0630F-R47M-LF | 0.47 | 4.5 | 25.0 | 17.5 |
| HAPM0630F-R68M-LF | 0.68 | 5.8 | 23.0 | 15.0 |
| HAPM0630F-R82M-LF | 0.82 | 8.0 | 20.0 | 13.0 |
| HAPM0630F-1R0M-LF | 1.00 | 9.0 | 16.0 | 11.0 |
| HAPM0630F-1R5M-LF | 1.50 | 16.0 | 14.0 | 9.0 |
| HAPM0630F-2R2M-LF | 2.20 | 20.0 | 12.0 | 8.0 |
| HAPM0630F-3R3M-LF | 3.30 | 30.0 | 10.0 | 6.0 |
| HAPM0630F-4R7M-LF | 4.70 | 40.0 | 9.0 | 5.0 |
| HAPM0630F-6R8M-LF | 6.80 | 60.0 | 6.0 | 4.5 |
| HAPM0630F-8R2M-LF | 6.80 | 80.0 | 5.7 | 4.0 |
| HAPM0630F-100M-LF | 10.0 | 95 | 5.5 | 3.5 |
| HAPM0630F-220M-LF | 22.0 | 167 | 3.0 | 2.5 |
Power Inductors
HAPM1040
| HONGDA Part No. | Inductance | DCR (mΩ) | Isat(A) | Irms(A) |
|---|---|---|---|---|
| (uH)±20% | Max. | Typ. | Typ. | |
| HAPM1040F-1R0M-LF | 1.0 | 4.70 | 28.0 | 18.0 |
| HAPM1040F-1R5M-LF | 1.5 | 5.80 | 27.0 | 16.0 |
| HAPM1040F-2R2M-LF | 2.2 | 9.00 | 22.0 | 12.0 |
| HAPM1040F-3R3M-LF | 3.3 | 12.5 | 16.0 | 10.0 |
| HAPM1040F-4R7M-LF | 4.7 | 16.5 | 13.0 | 8.0 |
| HAPM1040F-6R8M-LF | 6.8 | 28.0 | 9.0 | 6.5 |
| HAPM1040F-100M-LF | 10.0 | 36.5 | 8.0 | 5.0 |
| HAPM1040F-150M-LF | 15.0 | 48.0 | 7.0 | 4.0 |
| HAPM1040F-220M-LF | 22.0 | 72.0 | 5.0 | 3.0 |
Power Inductors
HAPM1335
| HONGDA Part No. | Inductance | DCR (mΩ) | Isat(A) | Irms(A) |
|---|---|---|---|---|
| (uH)±20% | Max. | Typ. | Typ. | |
| HAPM1335F-R47M-LF | 0.5 | 2.00 | 55.00 | 32.00 |
| HAPM1335F-R68M-LF | 0.7 | 2.50 | 49.00 | 28.00 |
| HAPM1335F-1R0M-LF | 1.0 | 3.50 | 40.00 | 23.00 |
| HAPM1335F-1R5M-LF | 1.5 | 5.50 | 35.00 | 19.00 |
| HAPM1335F-2R2M-LF | 2.2 | 8.00 | 29.00 | 16.00 |
| HAPM1335F-3R3M-LF | 3.3 | 12.00 | 27.00 | 12.00 |
| HAPM1335F-4R7M-LF | 4.7 | 15.00 | 24.00 | 10.00 |
| HAPM1335F-6R8M-LF | 6.8 | 22.00 | 18.00 | 9.00 |
| HAPM1335F-8R2M-LF | 8.2 | 28.00 | 16.00 | 8.50 |
| HAPM1335F-100M-LF | 10.0 | 34.00 | 14.00 | 7.00 |
| HAPM1335F-220M-LF | 22.0 | 90.00 | 4.50 | 3.00 |
Power Inductors
HAPM1350
| HONGDA Part No. | Inductance | DCR (mΩ) | Isat(A) | Irms(A) |
|---|---|---|---|---|
| (uH)±20% | Max. | Typ. | Typ. | |
| HAPM1350F-R47M-LF | 0.5 | 1.30 | 65.00 | 38.00 |
| HAPM1350F-R82M-LF | 0.8 | 2.30 | 53.00 | 31.00 |
| HAPM1350F-1R0M-LF | 1.0 | 2.50 | 50.00 | 29.00 |
| HAPM1350F-1R5M-LF | 1.5 | 4.10 | 48.00 | 23.00 |
| HAPM1350F-2R2M-LF | 2.2 | 5.50 | 32.00 | 20.00 |
| HAPM1350F-3R3M-LF | 3.3 | 9.20 | 30.00 | 15.00 |
| HAPM1350F-4R7M-LF | 4.7 | 15.00 | 27.00 | 12.00 |
| HAPM1350F-5R6M-LF | 5.6 | 17.00 | 22.00 | 11.50 |
| HAPM1350F-6R8M-LF | 6.8 | 19.00 | 21.00 | 11.00 |
| HAPM1350F-8R2M-LF | 8.2 | 23.00 | 18.00 | 9.50 |
| HAPM1350F-100M-LF | 10.0 | 26.00 | 16.00 | 9.00 |
HPIA/MPIAL Series - Wire Wound Type Inductor
Power Inductors
HPIA201608
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIA201608-R24M-LF | 0.24 ±20% | 0.038 | 0.032 | 4.30 | 5.00 | 2.80 | 3.05 |
| HPIA201608-R33M-LF | 0.33 ±20% | 0.048 | 0.040 | 4.00 | 5.00 | 2.50 | 2.75 |
| HPIA201608-R47M-LF | 0.47 ±20% | 0.057 | 0.048 | 2.80 | 3.30 | 2.30 | 2.50 |
| HPIA201608-1R0M-LF | 1.0 ±20% | 0.116 | 0.097 | 2.00 | 2.50 | 1.60 | 1.75 |
| HPIA201608-1R5M-LF | 1.5 ±20% | 0.156 | 0.130 | 1.50 | 1.80 | 1.40 | 1.55 |
| HPIA201608-2R2M-LF | 2.2 ±20% | 0.255 | 0.212 | 1.20 | 1.50 | 1.10 | 1.20 |
Power Inductors
HPIAL201608
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIAL201608-R24M-LF | 0.24 ±20% | 0.041 | 0.034 | 5.50 | 6.50 | 2.70 | 3.00 |
| HPIAL201608-R33M-LF | 0.33 ±20% | 0.053 | 0.044 | 5.00 | 6.50 | 2.35 | 2.60 |
| HPIAL201608-R47M-LF | 0.47 ±20% | 0.060 | 0.050 | 3.30 | 4.00 | 2.25 | 2.45 |
| HPIAL201608-R68M-LF | 0.68 ±20% | 0.090 | 0.075 | 2.80 | 3.10 | 1.80 | 2.00 |
| HPIAL201608-1R0M-LF | 1.0 ±20% | 0.125 | 0.104 | 2.50 | 3.20 | 1.55 | 1.70 |
| HPIAL201608-1R5M-LF | 1.5 ±20% | 0.180 | 0.150 | 2.00 | 2.50 | 1.30 | 1.40 |
| HPIAL201608-2R2M-LF | 2.2 ±20% | 0.275 | 0.229 | 1.60 | 2.00 | 1.05 | 1.15 |
Power Inductors
HPIA252008
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIA252008-R24M-LF | 0.24 ±20% | 0.044 | 0.037 | 6.50 | 8.00 | 2.30 | 2.50 |
| HPIA252008-R33M-LF | 0.33 ±20% | 0.050 | 0.042 | 6.00 | 7.00 | 2.15 | 2.35 |
| HPIA252008-R47M-LF | 0.47 ±20% | 0.070 | 0.058 | 3.20 | 4.00 | 1.85 | 2.05 |
| HPIA252008-R68M-LF | 0.68 ±20% | 0.082 | 0.068 | 3.00 | 4.00 | 1.70 | 1.88 |
| HPIA252008-1R0M-LF | 1.0 ±20% | 0.120 | 0.100 | 2.70 | 3.40 | 1.41 | 1.55 |
| HPIA252008-1R5M-LF | 1.5 ±20% | 0.170 | 0.142 | 2.20 | 2.70 | 1.15 | 1.30 |
| HPIA252008-2R2M-LF | 2.2 ±20% | 0.240 | 0.200 | 1.60 | 2.00 | 1.00 | 1.10 |
| HPIA252008-3R3M-LF | 3.3 ±20% | 0.410 | 0.340 | 1.50 | 2.00 | 0.76 | 0.85 |
| HPIA252008-4R7M-LF | 4.7 ±20% | 0.510 | 0.425 | 1.20 | 1.60 | 0.68 | 0.75 |
| HPIA252008-100M-LF | 10 ±20% | 1.290 | 1.075 | 0.80 | 1.20 | 0.43 | 0.50 |
Power Inductors
HPIA201610
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIA201610-R24M-LF | 0.24 ±20% | 0.032 | 0.028 | 5.00 | 5.50 | 3.65 | 4.30 |
| HPIA201610-R33M-LF | 0.33 ±20% | 0.032 | 0.028 | 4.00 | 4.60 | 4.00 | 4.80 |
| HPIA201610-R47M-LF | 0.47 ±20% | 0.035 | 0.029 | 3.50 | 4.00 | 3.80 | 4.50 |
| HPIA201610-R68M-LF | 0.68 ±20% | 0.057 | 0.048 | 3.00 | 3.40 | 2.60 | 3.00 |
| HPIA201610-1R0M-LF | 1.0 ±20% | 0.090 | 0.075 | 2.70 | 3.15 | 2.10 | 2.40 |
| HPIA201610-1R5M-LF | 1.5 ±20% | 0.130 | 0.110 | 2.00 | 2.20 | 1.70 | 2.00 |
| HPIA201610-2R2M-LF | 2.2 ±20% | 0.165 | 0.138 | 1.75 | 2.10 | 1.25 | 1.45 |
| HPIA201610-4R7M-LF | 4.7 ±20% | 0.430 | 0.375 | 1.00 | 1.30 | 0.90 | 1.00 |
Power Inductors
HPIAL201610
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIAL201610-R24M-LF | 0.24 ±20% | 0.026 | 0.021 | 5.90 | 7.00 | 4.35 | 4.80 |
| HPIAL201610-R33M-LF | 0.33 ±20% | 0.035 | 0.030 | 5.50 | 6.00 | 3.20 | 3.50 |
| HPIAL201610-R47M-LF | 0.47 ±20% | 0.035 | 0.030 | 4.50 | 4.90 | 3.80 | 4.50 |
| HPIAL201610-R68M-LF | 0.68 ±20% | 0.060 | 0.050 | 4.20 | 5.00 | 2.60 | 3.00 |
| HPIAL201610-1R0M-LF | 1.0 ±20% | 0.065 | 0.055 | 2.50 | 3.00 | 2.50 | 2.90 |
| HPIAL201610-1R5M-LF | 1.5 ±20% | 0.115 | 0.095 | 2.50 | 3.00 | 1.85 | 2.05 |
| HPIAL201610-2R2M-LF | 2.2 ±20% | 0.140 | 0.115 | 1.50 | 1.70 | 1.60 | 1.90 |
| HPIAL201610-4R7M-LF | 4.7 ±20% | 0.430 | 0.358 | 1.40 | 1.60 | 0.95 | 1.05 |
Power Inductors
HPIA252010
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIA252010-R24M-LF | 0.24 ±20% | 0.030 | 0.025 | 5.70 | 6.55 | 3.85 | 4.20 |
| HPIA252010-R33M-LF | 0.33 ±20% | 0.026 | 0.022 | 6.00 | 6.50 | 4.50 | 5.00 |
| HPIA252010-R47M-LF | 0.47 ±20% | 0.038 | 0.032 | 5.50 | 6.00 | 3.60 | 4.00 |
| HPIA252010-R68M-LF | 0.68 ±20% | 0.050 | 0.040 | 3.60 | 4.15 | 3.20 | 3.90 |
| HPIA252010-1R0M-LF | 1.0 ±20% | 0.065 | 0.054 | 3.20 | 3.55 | 2.80 | 3.20 |
| HPIA252010-1R5M-LF | 1.5 ±20% | 0.100 | 0.080 | 2.70 | 3.00 | 2.00 | 2.35 |
| HPIA252010-2R2M-LF | 2.2 ±20% | 0.130 | 0.108 | 1.90 | 2.30 | 1.80 | 2.00 |
| HPIA252010-3R3M-LF | 3.3 ±20% | 0.225 | 0.187 | 1.80 | 2.00 | 1.40 | 1.52 |
| HPIA252010-4R7M-LF | 4.7 ±20% | 0.310 | 0.260 | 1.50 | 1.60 | 1.15 | 1.35 |
| HPIA252010-100M-LF | 10 ±20% | 0.600 | 0.500 | 0.95 | 1.10 | 0.90 | 1.00 |
Power Inductors
HPIAL252010
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIAL252010-R24M-LF | 0.24 ±20% | 0.020 | 0.017 | 8.00 | 9.50 | 5.25 | 5.70 |
| HPIAL252010-R33M-LF | 0.33 ±20% | 0.026 | 0.022 | 6.50 | 8.00 | 4.60 | 5.00 |
| PIAL252010-R47M-LF | 0.47 ±20% | 0.042 | 0.035 | 6.00 | 8.00 | 3.50 | 4.00 |
| HPIAL252010-R68M-LF | 0.68 ±20% | 0.050 | 0.040 | 4.50 | 5.50 | 3.20 | 3.90 |
| PIAL252010-1R0M-LF | 1.0 ±20% | 0.062 | 0.055 | 3.70 | 3.90 | 3.00 | 3.20 |
| PIAL252010-1R5M-LF | 1.5 ±20% | 0.087 | 0.072 | 2.70 | 3.00 | 2.30 | 2.55 |
| PIAL252010-2R2M-LF | 2.2 ±20% | 0.120 | 0.100 | 2.00 | 2.40 | 2.00 | 2.30 |
| PIAL252010-4R7M-LF | 4.7 ±20% | 0.255 | 0.208 | 1.80 | 2.10 | 1.35 | 1.50 |
Power Inductors
HPIA252012
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIA252012-R24M-LF | 0.24 ±20% | 0.025 | 0.021 | 5.50 | 6.00 | 4.30 | 4.70 |
| HPIA252012-R33M-LF | 0.33 ±20% | 0.026 | 0.022 | 6.30 | 7.00 | 3.75 | 4.40 |
| HPIA252012-R47M-LF | 0.47 ±20% | 0.035 | 0.027 | 5.50 | 6.00 | 3.50 | 3.80 |
| HPIA252012-R68M-LF | 0.68 ±20% | 0.045 | 0.040 | 4.50 | 4.80 | 3.50 | 3.80 |
| HPIA252012-1R0M-LF | 1.0 ±20% | 0.057 | 0.047 | 3.80 | 4.00 | 3.30 | 3.60 |
| HPIA252012-1R5M-LF | 1.5 ±20% | 0.095 | 0.079 | 3.80 | 4.20 | 2.50 | 3.00 |
| HPIA252012-2R2M-LF | 2.2 ±20% | 0.120 | 0.100 | 2.45 | 3.00 | 2.00 | 2.30 |
| HPIA252012-3R3M-LF | 3.3 ±20% | 0.156 | 0.130 | 1.80 | 2.10 | 1.35 | 1.50 |
| HPIA252012-4R7M-LF | 4.7 ±20% | 0.255 | 0.215 | 1.60 | 2.00 | 1.30 | 1.50 |
| HPIA252012-6R8M-LF | 6.8 ±20% | 0.340 | 0.283 | 1.30 | 1.50 | 1.00 | 1.10 |
| HPIA252012-100M-LF | 10 ±20% | 0.450 | 0.400 | 1.30 | 1.50 | 0.70 | 0.80 |
Power Inductors
HPIA3012
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIA3012-R47M-LF | 0.47 ±20% | 0.033 | 0.026 | 7.00 | 8.50 | 4.00 | 4.50 |
| HPIA3012-1R0M-LF | 1.0 ±20% | 0.055 | 0.045 | 5.50 | 7.00 | 2.70 | 3.10 |
| HPIA3012-1R5M-LF | 1.5 ±20% | 0.074 | 0.063 | 4.00 | 5.00 | 2.50 | 2.70 |
| HPIA3012-2R2M-LF | 2.2 ±20% | 0.105 | 0.088 | 3.50 | 4.20 | 2.10 | 2.30 |
| HPIA3012-3R3M-LF | 3.3 ±20% | 0.150 | 0.125 | 2.50 | 3.30 | 1.75 | 1.90 |
| HPIA3012-4R7M-LF | 4.7 ±20% | 0.215 | 0.180 | 2.10 | 2.60 | 1.30 | 1.50 |
| HPIA3012-6R8M-LF | 6.8 ±20% | 0.295 | 0.245 | 1.75 | 2.00 | 1.17 | 1.35 |
| HPIA3012-100M-LF | 10 ±20% | 0.440 | 0.365 | 1.55 | 1.90 | 1.10 | 1.25 |
Power Inductors
HPIA3015
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIA3015-R47M-LF | 0.47 ±20% | 0.030 | 0.025 | 7.50 | 9.00 | 4.60 | 5.00 |
| HPIA3015-1R0M-LF | 1.0 ±20% | 0.048 | 0.040 | 5.30 | 6.30 | 3.60 | 3.95 |
| HPIA3015-1R5M-LF | 1.5 ±20% | 0.054 | 0.045 | 3.60 | 4.30 | 3.40 | 3.70 |
| HPIA3015-2R2M-LF | 2.2 ±20% | 0.078 | 0.065 | 3.10 | 4.00 | 2.80 | 3.10 |
| HPIA3015-3R3M-LF | 3.3 ±20% | 0.102 | 0.085 | 2.50 | 3.20 | 2.45 | 2.65 |
| HPIA3015-4R7M-LF | 4.7 ±20% | 0.152 | 0.126 | 2.20 | 2.60 | 2.00 | 2.20 |
| HPIA3015-6R8M-LF | 6.8 ±20% | 0.220 | 0.183 | 1.80 | 2.00 | 1.65 | 1.80 |
| HPIA3015-100M-LF | 10.0 ±20% | 0.320 | 0.270 | 1.50 | 1.80 | 1.35 | 1.50 |
HPIE Series - Wire Wound Type Inductor
Power Inductors
HPIE201608
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIE201608-R24M-LF | 0.24 ±20% | 0.044 | 0.037 | 4.10 | 4.50 | 2.60 | 2.85 |
| HPIE201608-R33M-LF | 0.33 ±20% | 0.047 | 0.039 | 2.80 | 3.30 | 2.50 | 2.75 |
| HPIE201608-R47M-LF | 0.47 ±20% | 0.065 | 0.054 | 2.60 | 3.00 | 2.10 | 2.35 |
| HPIE201608-R68M-LF | 0.68 ±20% | 0.088 | 0.073 | 2.50 | 2.90 | 1.80 | 2.00 |
| HPIE201608-1R0M-LF | 1.0 ±20% | 0.094 | 0.078 | 1.70 | 1.90 | 1.75 | 1.95 |
| HPIE201608-1R5M-LF | 1.5 ±20% | 0.127 | 0.106 | 1.20 | 1.40 | 1.53 | 1.67 |
| HPIE201608-2R2M-LF | 2.2 ±20% | 0.194 | 0.162 | 1.00 | 1.20 | 1.20 | 1.33 |
| HPIE201608-4R7M-LF | 4.7 ±20% | 0.500 | 0.416 | 0.80 | 1.00 | 0.74 | 0.80 |
Power Inductors
HPIE201610
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIE201610-R24M-LF | 0.24 ±20% | 0.032 | 0.025 | 4.50 | 4.85 | 3.70 | 4.30 |
| HPIE201610-R33M-LF | 0.33 ±20% | 0.026 | 0.022 | 3.20 | 3.50 | 4.50 | 5.00 |
| HPIE201610-R47M-LF | 0.47 ±20% | 0.042 | 0.035 | 2.55 | 3.60 | 2.80 | 3.00 |
| HPIE201610-R68M-LF | 0.68 ±20% | 0.058 | 0.048 | 2.50 | 3.00 | 2.60 | 3.00 |
| HPIE201610-1R0M-LF | 1.0 ±20% | 0.070 | 0.060 | 1.85 | 2.20 | 2.50 | 2.60 |
| HPIE201610-1R5M-LF | 1.5 ±20% | 0.120 | 0.100 | 1.50 | 1.70 | 1.70 | 2.00 |
| HPIE201610-2R2M-LF | 2.2 ±20% | 0.150 | 0.125 | 1.30 | 1.60 | 1.50 | 1.60 |
| HPIE201610-4R7M-LF | 4.7 ±20% | 0.350 | 0.265 | 1.00 | 1.10 | 1.00 | 1.10 |
| HPIE201610-100M-LF | 10 ±20% | 0.815 | 0.680 | 0.68 | 0.75 | 0.61 | 0.70 |
| HPIE201610-150M-LF | 15 ±20% | 1.440 | 1.200 | 0.40 | 0.50 | 0.40 | 0.45 |
| HPIE201610-220M-LF | 22 ±20% | 1.750 | 1.460 | 0.50 | 0.53 | 0.36 | 0.40 |
Power Inductors
HPIE252008
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIE252008-R24M-LF | 0.24 ±20% | 0.040 | 0.033 | 3.00 | 3.20 | 2.20 | 2.43 |
| HPIE252008-R33M-LF | 0.33 ±20% | 0.053 | 0.044 | 3.00 | 3.20 | 1.90 | 2.10 |
| HPIE252008-R47M-LF | 0.47 ±20% | 0.068 | 0.057 | 2.60 | 3.00 | 1.70 | 1.85 |
| HPIE252008-R68M-LF | 0.68 ±20% | 0.068 | 0.057 | 1.50 | 2.00 | 1.70 | 1.85 |
| HPIE252008-1R0M-LF | 1.0 ±20% | 0.086 | 0.072 | 1.20 | 1.40 | 1.50 | 1.64 |
| HPIE252008-1R5M-LF | 1.5 ±20% | 0.142 | 0.118 | 1.10 | 1.40 | 1.16 | 1.28 |
| HPIE252008-2R2M-LF | 2.2 ±20% | 0.195 | 0.162 | 0.80 | 1.10 | 1.00 | 1.12 |
| HPIE252008-3R3M-LF | 3.3 ±20% | 0.360 | 0.300 | 0.80 | 0.95 | 0.75 | 0.82 |
| HPIE252008-4R7M-LF | 4.7 ±20% | 0.480 | 0.400 | 0.65 | 0.80 | 0.64 | 0.70 |
| HPIE252008-6R8M-LF | 6.8 ±20% | 0.570 | 0.475 | 0.55 | 0.61 | 0.58 | 0.65 |
| HPIE252008-100M-LF | 10.0 ±20% | 0.960 | 0.800 | 0.43 | 0.48 | 0.46 | 0.50 |
Power Inductors
HPIE252010
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIE252010-R24M-LF | 0.24 ±20% | 0.030 | 0.022 | 4.00 | 5.50 | 3.90 | 4.30 |
| HPIE252010-R33M-LF | 0.33 ±20% | 0.038 | 0.030 | 3.80 | 4.05 | 3.30 | 3.90 |
| HPIE252010-R47M-LF | 0.47 ±20% | 0.038 | 0.030 | 3.70 | 3.90 | 3.30 | 3.90 |
| HPIE252010-R68M-LF | 0.68 ±20% | 0.053 | 0.040 | 3.00 | 3.50 | 3.00 | 3.20 |
| HPIE252010-1R0M-LF | 1.0 ±20% | 0.072 | 0.060 | 2.30 | 2.60 | 2.30 | 2.60 |
| HPIE252010-1R5M-LF | 1.5 ±20% | 0.103 | 0.085 | 2.00 | 2.20 | 1.90 | 2.10 |
| HPIE252010-2R2M-LF | 2.2 ±20% | 0.130 | 0.108 | 1.50 | 1.70 | 1.80 | 2.00 |
| HPIE252010-3R3M-LF | 3.3 ±20% | 0.210 | 0.190 | 1.45 | 1.60 | 1.25 | 1.50 |
| HPIE252010-4R7M-LF | 4.7 ±20% | 0.318 | 0.265 | 1.20 | 1.30 | 1.10 | 1.20 |
| HPIE252010-6R8M-LF | 6.8 ±20% | 0.470 | 0.425 | 1.00 | 1.10 | 0.90 | 1.10 |
| HPIE252010-100M-LF | 10 ±20% | 0.600 | 0.530 | 0.75 | 0.80 | 0.70 | 0.80 |
| HPIE252010-150M-LF | 15 ±20% | 0.990 | 0.825 | 0.50 | 0.60 | 0.45 | 0.50 |
HPIH Series - Wire Wound Type Inductor
Power Inductors
HPIH201610
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIH201610-R24M-LF | 0.24 ±20% | 0.032 | 0.025 | 3.80 | 4.20 | 3.70 | 4.30 |
| HPIH201610-R33M-LF | 0.33 ±20% | 0.041 | 0.034 | 3.50 | 3.80 | 3.50 | 3.80 |
| HPIH201610-R47M-LF | 0.47 ±20% | 0.041 | 0.034 | 2.35 | 3.00 | 2.80 | 3.00 |
| HPIH201610-R68M-LF | 0.68 ±20% | 0.060 | 0.050 | 2.20 | 2.60 | 2.60 | 2.80 |
| HPIH201610-1R0M-LF | 1.0 ±20% | 0.072 | 0.060 | 1.70 | 2.00 | 2.00 | 2.25 |
| HPIH201610-2R2M-LF | 2.2 ±20% | 0.215 | 0.175 | 1.10 | 1.35 | 1.25 | 1.40 |
| HPIH201610-3R3M-LF | 3.3 ±20% | 0.380 | 0.316 | 1.00 | 1.30 | 0.95 | 1.05 |
| HPIH201610-4R7M-LF | 4.7 ±20% | 0.420 | 0.340 | 0.90 | 1.00 | 0.90 | 1.00 |
| HPIH201610-6R8M-LF | 6.8 ±20% | 0.660 | 0.550 | 0.70 | 0.80 | 0.70 | 0.80 |
| HPIH201610-100M-LF | 10 ±20% | 0.820 | 0.680 | 0.60 | 0.65 | 0.60 | 0.70 |
Power Inductors
HPIH252010
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIH252010-R47M-LF | 0.47 ±20% | 0.042 | 0.035 | 3.40 | 3.60 | 3.20 | 3.50 |
| HPIH252010-R68M-LF | 0.68 ±20% | 0.058 | 0.045 | 2.80 | 3.20 | 2.75 | 3.20 |
| HPIH252010-1R0M-LF | 1.0 ±20% | 0.072 | 0.055 | 2.00 | 2.70 | 2.45 | 2.70 |
| HPIH252010-1R5M-LF | 1.5 ±20% | 0.108 | 0.090 | 1.80 | 2.00 | 1.80 | 2.00 |
| HPIH252010-2R2M-LF | 2.2 ±20% | 0.142 | 0.115 | 1.55 | 1.70 | 1.55 | 1.75 |
| HPIH252010-3R3M-LF | 3.3 ±20% | 0.270 | 0.225 | 1.45 | 1.50 | 1.15 | 1.25 |
| HPIH252010-4R7M-LF | 4.7 ±20% | 0.330 | 0.275 | 1.15 | 1.25 | 1.00 | 1.10 |
Power Inductors
HPIH252012
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIA252012-R24M-LF | 0.24 ±20% | 0.025 | 0.021 | 5.50 | 6.00 | 4.30 | 4.70 |
| HPIA252012-R33M-LF | 0.33 ±20% | 0.026 | 0.022 | 6.30 | 7.00 | 3.75 | 4.40 |
| HPIA252012-R47M-LF | 0.47 ±20% | 0.035 | 0.027 | 5.50 | 6.00 | 3.50 | 3.80 |
| HPIA252012-R68M-LF | 0.68 ±20% | 0.045 | 0.040 | 4.50 | 4.80 | 3.50 | 3.80 |
| HPIA252012-1R0M-LF | 1.0 ±20% | 0.057 | 0.047 | 3.80 | 4.00 | 3.30 | 3.60 |
| HPIA252012-1R5M-LF | 1.5 ±20% | 0.095 | 0.079 | 3.80 | 4.20 | 2.50 | 3.00 |
| HPIA252012-2R2M-LF | 2.2 ±20% | 0.120 | 0.100 | 2.45 | 3.00 | 2.00 | 2.30 |
| HPIA252012-3R3M-LF | 3.3 ±20% | 0.156 | 0.130 | 1.80 | 2.10 | 1.35 | 1.50 |
| HPIA252012-4R7M-LF | 4.7 ±20% | 0.255 | 0.215 | 1.60 | 2.00 | 1.30 | 1.50 |
| HPIA252012-6R8M-LF | 6.8 ±20% | 0.340 | 0.283 | 1.30 | 1.50 | 1.00 | 1.10 |
| HPIA252012-100M-LF | 10 ±20% | 0.450 | 0.400 | 1.30 | 1.50 | 0.70 | 0.80 |
HPIT Series - Wire Wound Type Inductor
Power Inductors
HPIT252010
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIT252010-R47M-LF | 0.47 ±20% | 0.056 | 0.047 | 3.20 | 3.40 | 2.43 | 2.70 |
| HPIT252010-R68M-LF | 0.68 ±20% | 0.056 | 0.047 | 2.50 | 2.90 | 2.43 | 2.70 |
| HPIT252010-1R0M-LF | 1.0 ±20% | 0.078 | 0.065 | 1.85 | 2.55 | 2.05 | 2.30 |
| HPIT252010-2R2M-LF | 2.2 ±20% | 0.186 | 0.155 | 1.55 | 1.70 | 1.45 | 1.65 |
| HPIT252010-3R3M-LF | 3.3 ±20% | 0.300 | 0.250 | 1.15 | 1.30 | 1.25 | 1.45 |
| HPIT252010-4R7M-LF | 4.7 ±20% | 0.456 | 0.380 | 1.10 | 1.20 | 0.85 | 0.90 |
| HPIT252010-6R8M-LF | 6.8 ±20% | 0.540 | 0.450 | 0.90 | 1.00 | 0.80 | 0.85 |
| HPIT252010-100M-LF | 10 ±20% | 0.660 | 0.550 | 0.80 | 0.90 | 0.60 | 0.70 |
| HPIT252010-220M-LF | 22 ±20% | 1.600 | 1.450 | 0.55 | 0.60 | 0.45 | 0.55 |
| HPIT252010-470M-LF | 47 ±20% | 2.400 | 2.000 | 0.28 | 0.35 | 0.28 | 0.35 |
Power Inductors
HPIT252012
| HONGDA Part No. | Inductance | DCR (Ω) | DCR (Ω) | Isat(A) | Isat(A) | Irms(A) | Irms(A) |
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIT252012-R47M-LF | 0.47 ±20% | 0.035 | 0.029 | 3.80 | 4.20 | 3.00 | 3.30 |
| HPIT252012-R68M-LF | 0.68 ±20% | 0.048 | 0.040 | 3.00 | 3.40 | 2.50 | 2.80 |
| HPIT252012-1R0M-LF | 1.0 ±20% | 0.065 | 0.050 | 1.70 | 1.90 | 2.43 | 2.70 |
| HPIT252012-1R5M-LF | 1.5 ±20% | 0.088 | 0.065 | 1.80 | 2.00 | 1.95 | 2.10 |
| HPIT252012-2R2M-LF | 2.2 ±20% | 0.144 | 0.110 | 1.55 | 1.85 | 1.70 | 1.85 |
| HPIT252012-3R3M-LF | 3.3 ±20% | 0.174 | 0.133 | 1.30 | 1.45 | 1.35 | 1.45 |
| HPIT252012-4R7M-LF | 4.7 ±20% | 0.252 | 0.210 | 1.25 | 1.30 | 1.12 | 1.25 |
| HPIT252012-5R6M-LF | 5.6 ±20% | 0.273 | 0.210 | 0.95 | 1.10 | 0.90 | 1.00 |
| HPIT252012-6R8M-LF | 6.8 ±20% | 0.360 | 0.300 | 0.90 | 1.05 | 0.85 | 0.95 |
| HPIT252012-100M-LF | 10 ±20% | 0.600 | 0.500 | 0.75 | 0.85 | 0.70 | 0.80 |
| HPIT252012-150M-LF | 15 ±20% | 0.720 | 0.600 | 0.55 | 0.70 | 0.60 | 0.70 |
| HPIT252012-220M-LF | 22 ±20% | 1.150 | 0.960 | 0.50 | 0.55 | 0.50 | 0.60 |
Power Inductors
HPIT3010
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIT3010-R56M-LF | 0.56 ±20% | 0.048 | 0.040 | 2.50 | 2.80 | 2.00 | 2.15 |
| HPIT3010-R68M-LF | 0.68 ±20% | 0.048 | 0.040 | 2.30 | 2.50 | 2.00 | 2.15 |
| HPIT3010-1R0M-LF | 1.0 ±20% | 0.066 | 0.055 | 1.95 | 2.15 | 1.75 | 2.00 |
| HPIT3010-1R5M-LF | 1.5 ±20% | 0.078 | 0.065 | 1.50 | 1.65 | 1.55 | 1.70 |
| HPIT3010-2R2M-LF | 2.2 ±20% | 0.130 | 0.100 | 1.20 | 1.50 | 1.10 | 1.40 |
| HPIT3010-3R3M-LF | 3.3 ±20% | 0.145 | 0.120 | 1.10 | 1.20 | 1.15 | 1.25 |
| HPIT3010-4R7M-LF | 4.7 ±20% | 0.222 | 0.185 | 0.95 | 1.10 | 0.95 | 1.05 |
| HPIT3010-6R8M-LF | 6.8 ±20% | 0.330 | 0.275 | 0.75 | 0.85 | 0.65 | 0.70 |
| HPIT3010-8R2M-LF | 8.2 ±20% | 0.348 | 0.290 | 0.70 | 0.80 | 0.70 | 0.80 |
| HPIT3010-100M-LF | 10 ±20% | 0.480 | 0.380 | 0.65 | 0.70 | 0.65 | 0.70 |
| HPIT3010-150M-LF | 15 ±20% | 0.624 | 0.520 | 0.50 | 0.60 | 0.50 | 0.60 |
| HPIT3010-220M-LF | 22 ±20% | 1.000 | 0.800 | 0.40 | 0.50 | 0.40 | 0.50 |
| HPIT3010-330M-LF | 33 ±20% | 1.200 | 1.000 | 0.30 | 0.40 | 0.30 | 0.40 |
Power Inductors
HPIT3012
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIT3012-R47M-LF | 0.47 ±20% | 0.030 | 0.025 | 3.50 | 4.00 | 2.80 | 3.10 |
| HPIT3012-R82M-LF | 0.82 ±20% | 0.039 | 0.030 | 2.40 | 2.60 | 2.60 | 3.30 |
| HPIT3012-1R0M-LF | 1.0 ±20% | 0.048 | 0.040 | 2.20 | 2.50 | 2.60 | 3.30 |
| HPIT3012-1R2M-LF | 1.2 ±20% | 0.048 | 0.040 | 1.85 | 2.15 | 2.25 | 2.60 |
| HPIT3012-1R5M-LF | 1.5 ±20% | 0.060 | 0.050 | 2.00 | 2.10 | 2.00 | 2.30 |
| HPIT3012-2R2M-LF | 2.2 ±20% | 0.075 | 0.062 | 1.40 | 1.65 | 1.85 | 2.10 |
| HPIT3012-3R3M-LF | 3.3 ±20% | 0.108 | 0.090 | 1.25 | 1.45 | 1.50 | 1.70 |
| HPIT3012-6R8M-LF | 6.8 ±20% | 210 | 175 | 90 | 105 | 105 | 115 |
| HPIT3012-100M-LF | 10 ±20% | 330 | 260 | 65 | 75 | 83 | 100 |
| HPIT3012-150M-LF | 15 ±20% | 420 | 350 | 50 | 60 | 75 | 85 |
| HPIT3012-180M-LF | 18 ±20% | 576 | 480 | 50 | 60 | 68 | 78 |
| HPIT3012-220M-LF | 22 ±20% | 588 | 490 | 45 | 50 | 65 | 75 |
| HPIT3012-330M-LF | 33 ±20% | 960 | 800 | 40 | 47 | 50 | 55 |
| HPIT3012-470M-LF | 47 ±20% | 1560 | 1300 | 35 | 45 | 40 | 45 |
Power Inductors
HPIT3015
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIT3015-R22M-LF | 0.22 ±20% | 0.012 | 0.009 | 6.50 | 6.90 | 6.00 | 6.50 |
| HPIT3015-R24M-LF | 0.24 ±20% | 0.012 | 0.009 | 5.50 | 6.00 | 5.50 | 6.00 |
| HPIT3015-R47M-LF | 0.47 ±20% | 0.021 | 0.018 | 4.00 | 4.10 | 4.00 | 4.20 |
| HPIT3015-1R0M-LF | 1.0 ±20% | 0.040 | 0.030 | 2.65 | 2.80 | 2.65 | 2.85 |
| HPIT3015-1R2M-LF | 1.2 ±20% | 0.048 | 0.040 | 2.60 | 2.80 | 2.40 | 2.65 |
| HPIT3015-1R5M-LF | 1.5 ±20% | 0.055 | 0.045 | 2.55 | 2.75 | 2.30 | 2.60 |
| HPIT3015-2R2M-LF | 2.2 ±20% | 0.072 | 0.060 | 1.95 | 2.10 | 2.10 | 2.25 |
| HPIT3015-3R3M-LF | 3.3 ±20% | 0.102 | 0.085 | 1.65 | 1.75 | 1.75 | 1.85 |
| HPIT3015-3R9M-LF | 3.9 ±20% | 0.132 | 0.110 | 1.40 | 1.50 | 1.60 | 1.70 |
| HPIT3015-4R7M-LF | 4.7 ±20% | 0.145 | 0.120 | 1.35 | 1.45 | 1.40 | 1.50 |
| HPIT3015-5R6M-LF | 5.6 ±20% | 0.156 | 0.130 | 1.00 | 1.20 | 1.40 | 1.50 |
| HPIT3015-6R8M-LF | 6.8 ±20% | 0.200 | 0.170 | 1.00 | 1.15 | 1.20 | 1.30 |
| HPIT3015-8R2M-LF | 8.2 ±20% | 0.228 | 0.190 | 0.85 | 1.05 | 1.10 | 1.20 |
| HPIT3015-100M-LF | 10 ±20% | 0.300 | 0.250 | 1.00 | 1.10 | 1.00 | 1.05 |
| HPIT3015-120M-LF | 12 ±20% | 0.300 | 0.250 | 0.75 | 0.85 | 1.00 | 1.05 |
| HPIT3015-150M-LF | 15 ±20% | 0.420 | 0.350 | 0.70 | 0.80 | 0.85 | 0.95 |
| HPIT3015-220M-LF | 22 ±20% | 0.545 | 0.440 | 0.55 | 0.65 | 0.75 | 0.85 |
| HPIT3015-330M-LF | 33 ±20% | 0.852 | 0.710 | 0.45 | 0.50 | 0.60 | 0.65 |
| HPIT3015-470M-LF | 47 ±20% | 1.200 | 1.000 | 0.40 | 0.45 | 0.50 | 0.55 |
| HPIT3015-680M-LF | 68 ±20% | 2.400 | 2.000 | 0.32 | 0.34 | 0.35 | 0.40 |
| HPIT3015-101M-LF | 100 ±20% | 4.040 | 3.110 | 0.23 | 0.25 | 0.21 | 0.25 |
Power Inductors
HPIT4012
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIT4012-R82M-LF | 0.82 ±20% | 0.065 | 0.050 | 3.45 | 3.65 | 2.00 | 2.20 |
| HPIT4012-1R0M-LF | 1.0 ±20% | 0.065 | 0.050 | 3.00 | 3.20 | 2.00 | 2.20 |
| HPIT4012-1R5M-LF | 1.5 ±20% | 0.078 | 0.065 | 2.30 | 2.50 | 1.90 | 2.00 |
| HPIT4012-2R2M-LF | 2.2 ±20% | 0.104 | 0.087 | 2.00 | 2.10 | 1.85 | 2.10 |
| HPIT4012-3R3M-LF | 3.3 ±20% | 0.143 | 0.110 | 1.80 | 1.95 | 1.50 | 1.70 |
| HPIT4012-4R7M-LF | 4.7 ±20% | 0.182 | 0.140 | 1.40 | 1.55 | 1.35 | 1.50 |
| HPIT4012-5R6M-LF | 5.6 ±20% | 0.215 | 0.165 | 1.50 | 1.60 | 1.25 | 1.35 |
| HPIT4012-6R8M-LF | 6.8 ±20% | 0.257 | 0.198 | 1.25 | 1.40 | 1.15 | 1.30 |
| HPIT4012-100M-LF | 10 ±20% | 0.312 | 0.240 | 0.90 | 1.05 | 0.95 | 1.05 |
| HPIT4012-150M-LF | 15 ±20% | 0.494 | 0.380 | 0.70 | 0.90 | 0.80 | 0.90 |
| HPIT4012-220M-LF | 22 ±20% | 0.741 | 0.570 | 0.60 | 0.70 | 0.67 | 0.75 |
| HPIT4012-330M-LF | 33 ±20% | 1.050 | 0.810 | 0.45 | 0.69 | 0.45 | 0.50 |
| HPIT4012-470M-LF | 47 ±20% | 1.760 | 1.350 | 0.40 | 0.45 | 0.40 | 0.45 |
| HPIT4012-101M-LF | 100 ±20% | 3.600 | 3.000 | 0.30 | 0.35 | 0.28 | 0.30 |
Power Inductors
HPIT4018
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIT4018-R24M-LF | 0.24 ±20% | 0.016 | 0.012 | 6.50 | 7.00 | 4.60 | 5.00 |
| HPIT4018-R68M-LF | 0.68 ±20% | 0.025 | 0.021 | 6.00 | 7.00 | 3.80 | 4.15 |
| HPIT4018-1R0M-LF | 1.0 ±20% | 0.030 | 0.025 | 4.55 | 4.85 | 3.40 | 3.80 |
| HPIT4018-1R2M-LF | 1.2 ±20% | 0.030 | 0.025 | 4.20 | 4.80 | 3.40 | 3.80 |
| HPIT4018-1R5M-LF | 1.5 ±20% | 0.036 | 0.030 | 3.90 | 4.25 | 2.95 | 3.20 |
| HPIT4018-2R2M-LF | 2.2 ±20% | 0.048 | 0.040 | 3.15 | 3.40 | 2.60 | 2.90 |
| HPIT4018-2R7M-LF | 2.7 ±20% | 0.060 | 0.050 | 2.70 | 3.00 | 2.20 | 2.50 |
| HPIT4018-3R3M-LF | 3.3 ±20% | 0.060 | 0.050 | 2.70 | 3.00 | 2.20 | 2.50 |
| HPIT4018-3R9M-LF | 3.9 ±20% | 0.078 | 0.065 | 2.60 | 2.80 | 2.00 | 2.20 |
| HPIT4018-4R7M-LF | 4.7 ±20% | 0.078 | 0.065 | 2.10 | 2.30 | 2.00 | 2.20 |
| HPIT4018-6R8M-LF | 6.8 ±20% | 0.108 | 0.090 | 1.70 | 1.85 | 1.70 | 1.90 |
| HPIT4018-100M-LF | 10 ±20% | 0.168 | 0.140 | 1.40 | 1.55 | 1.20 | 1.30 |
| HPIT4018-150M-LF | 15 ±20% | 0.228 | 0.190 | 1.15 | 1.25 | 1.00 | 1.20 |
| HPIT4018-220M-LF | 22 ±20% | 0.336 | 0.280 | 1.00 | 1.10 | 0.95 | 1.10 |
| PIT4018-330M-LF | 33 ±20% | 0.480 | 0.400 | 0.80 | 0.90 | 0.75 | 0.85 |
| HPIT4018-470M-LF | 47 ±20% | 0.720 | 0.600 | 0.70 | 0.80 | 0.60 | 0.70 |
| HPIT4018-560M-LF | 56 ±20% | 0.912 | 0.760 | 0.65 | 0.80 | 0.53 | 0.58 |
| HPIT4018-101M-LF | 100 ±20% | 1.740 | 1.450 | 0.45 | 0.55 | 0.30 | 0.35 |
| HPIT4018-221M-LF | 220 ±20% | 3.600 | 3.000 | 0.30 | 0.34 | 0.21 | 0.23 |
Power Inductors
HPIT4030
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIT4030-R91M-LF | 0.91 ±20% | 0.017 | 0.013 | 7.00 | 8.00 | 4.15 | 4.70 |
| HPIT4030-1R0M-LF | 1.0 ±20% | 0.018 | 0.014 | 6.50 | 7.20 | 4.15 | 4.70 |
| HPIT4030-1R2M-LF | 1.2 ±20% | 0.020 | 0.015 | 6.00 | 6.80 | 3.82 | 4.20 |
| HPIT4030-1R5M-LF | 1.5 ±20% | 0.026 | 0.020 | 5.50 | 6.50 | 3.34 | 3.60 |
| HPIT4030-1R8M-LF | 1.8 ±20% | 0.033 | 0.025 | 5.50 | 5.80 | 3.20 | 3.30 |
| HPIT4030-2R2M-LF | 2.2 ±20% | 0.039 | 0.030 | 5.00 | 5.40 | 2.95 | 3.20 |
| HPIT4030-3R3M-LF | 3.3 ±20% | 0.052 | 0.040 | 3.60 | 4.20 | 2.40 | 2.65 |
| HPIT4030-3R9M-LF | 3.9 ±20% | 0.072 | 0.057 | 3.30 | 3.80 | 2.10 | 2.30 |
| HPIT4030-4R7M-LF | 4.7 ±20% | 0.078 | 0.060 | 2.70 | 3.20 | 2.00 | 2.20 |
| HPIT4030-5R6M-LF | 5.6 ±20% | 0.085 | 0.065 | 2.70 | 2.90 | 1.95 | 2.10 |
| HPIT4030-6R8M-LF | 6.8 ±20% | 0.109 | 0.084 | 2.30 | 2.80 | 1.65 | 1.80 |
| HPIT4030-8R2M-LF | 8.2 ±20% | 0.109 | 0.084 | 2.10 | 2.35 | 1.65 | 1.80 |
| HPIT4030-100M-LF | 10 ±20% | 0.125 | 0.096 | 1.80 | 2.20 | 1.52 | 1.65 |
| HPIT4030-120M-LF | 12 ±20% | 0.170 | 0.131 | 1.65 | 2.10 | 1.30 | 1.45 |
| HPIT4030-150M-LF | 15 ±20% | 0.245 | 0.189 | 1.60 | 1.90 | 1.11 | 1.20 |
| HPIT4030-220M-LF | 22 ±20% | 0.295 | 0.225 | 1.10 | 1.50 | 1.00 | 1.10 |
| HPIT4030-330M-LF | 33 ±20% | 0.415 | 0.320 | 1.00 | 1.30 | 0.85 | 0.95 |
| HPIT4030-390M-LF | 39 ±20% | 0.450 | 0.345 | 1.03 | 1.10 | 0.80 | 0.90 |
| HPIT4030-470M-LF | 47 ±20% | 0.580 | 0.445 | 0.75 | 1.05 | 0.72 | 0.80 |
| HPIT4030-560M-LF | 56 ±20% | 0.720 | 0.555 | 0.85 | 0.95 | 0.65 | 0.70 |
| HPIT4030-620M-LF | 62 ±20% | 1.080 | 0.829 | 0.80 | 0.85 | 0.53 | 0.60 |
| HPIT4030-680M-LF | 68 ±20% | 1.130 | 0.868 | 0.70 | 0.85 | 0.52 | 0.55 |
| HPIT4030-101M-LF | 100 ±20% | 1.450 | 1.110 | 0.60 | 0.75 | 0.45 | 0.50 |
| HPIT4030-121M-LF | 120 ±20% | 1.630 | 1.250 | 0.53 | 0.60 | 0.43 | 0.47 |
| HPIT4030-151M-LF | 150 ±20% | 1.720 | 1.440 | 0.50 | 0.60 | 0.42 | 0.46 |
| HPIT4030-181M-LF | 180 ±20% | 1.836 | 1.530 | 0.48 | 0.55 | 0.40 | 0.44 |
| HPIT4030-331M-LF | 330 ±20% | 4.080 | 3.400 | 0.30 | 0.38 | 0.27 | 0.30 |
Power Inductors
HPIT5020
| HONGDA Part No. | Inductance | DCR (Ω) | Isat (A) | ||
|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | |
| HPIT5020-R47N-LF | 0.47 ±30% | 16 | 12 | 800 | 840 |
| HPIT5020-R68N-LF | 0.68 ±30% | 18 | 14 | 750 | 800 |
| HPIT5020-1R0M-LF | 1.0 ±20% | 25 | 19 | 640 | 700 |
| HPIT5020-1R5M-LF | 1.5 ±20% | 34 | 26 | 520 | 570 |
| HPIT5020-2R2M-LF | 2.2 ±20% | 42 | 32 | 450 | 490 |
| HPIT5020-2R7M-LF | 2.7 ±20% | 46 | 35 | 420 | 450 |
| HPIT5020-3R3M-LF | 3.3 ±20% | 56 | 43 | 380 | 420 |
| HPIT5020-4R7M-LF | 4.7 ±20% | 74 | 57 | 300 | 310 |
| HPIT5020-5R6M-LF | 5.6 ±20% | 83 | 64 | 230 | 250 |
| HPIT5020-6R8M-LF | 6.8 ±20% | 108 | 83 | 230 | 250 |
| HPIT5020-100M-LF | 10 ±20% | 137 | 105 | 200 | 220 |
| HPIT5020-120M-LF | 12 ±20% | 182 | 140 | 170 | 210 |
| HPIT5020-150M-LF | 15 ±20% | 228 | 175 | 160 | 190 |
| HPIT5020-180M-LF | 18 ±20% | 283 | 218 | 150 | 170 |
| HPIT5020-220M-LF | 22 ±20% | 286 | 220 | 140 | 155 |
| HPIT5020-470M-LF | 47 ±20% | 624 | 520 | 80 | 90 |
| HPIT5020-101M-LF | 100 ±20% | 1430 | 1100 | 55 | 60 |
Power Inductors
HPIT5040
| HONGDA Part No. | Inductance | DCR (Ω) | Isat (A) | ||
|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | |
| HPIT5040-1R0M-LF | 1.0 ±20% | 15 | 12 | 820 | 860 |
| HPIT5040-1R5M-LF | 1.5 ±20% | 19 | 15 | 650 | 710 |
| HPIT5040-2R2M-LF | 2.2 ±20% | 24 | 19 | 580 | 630 |
| HPIT5040-2R7M-LF | 2.7 ±20% | 28 | 22 | 500 | 540 |
| HPIT5040-3R3M-LF | 3.3 ±20% | 31 | 24 | 460 | 520 |
| HPIT5040-3R9M-LF | 3.9 ±20% | 35 | 27 | 400 | 440 |
| HPIT5040-4R7M-LF | 4.7 ±20% | 39 | 30 | 400 | 430 |
| HPIT5040-6R8M-LF | 6.8 ±20% | 53 | 41 | 320 | 350 |
| HPIT5040-100M-LF | 10 ±20% | 74 | 57 | 270 | 300 |
| HPIT5040-150M-LF | 15 ±20% | 112 | 86 | 220 | 240 |
| HPIT5040-220M-LF | 22 ±20% | 168 | 129 | 175 | 190 |
| HPIT5040-270M-LF | 27 ±20% | 194 | 162 | 150 | 163 |
| HPIT5040-330M-LF | 33 ±20% | 244 | 188 | 130 | 150 |
| HPIT5040-470M-LF | 47 ±20% | 350 | 270 | 115 | 130 |
| HPIT5040-680M-LF | 68 ±20% | 520 | 400 | 90 | 105 |
| HPIT5040-101M-LF | 100 ±20% | 660 | 550 | 85 | 100 |
Power Inductors
HPIT6045
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIT6045-R82M-LF | 0.82 ±20% | 0.011 | 0.008 | 13.00 | 15.00 | 5.75 | 6.35 |
| HPIT6045-1R0M-LF | 1.0 ±20% | 0.011 | 0.008 | 12.00 | 13.00 | 6.50 | 7.50 |
| HPIT6045-1R2M-LF | 1.2 ±20% | 0.013 | 0.010 | 11.00 | 12.50 | 5.50 | 6.05 |
| HPIT6045-1R5M-LF | 1.5 ±20% | 0.013 | 0.010 | 10.00 | 11.50 | 5.50 | 6.05 |
| HPIT6045-1R8M-LF | 1.8 ±20% | 0.016 | 0.012 | 9.50 | 10.50 | 4.85 | 5.60 |
| HPIT6045-2R2M-LF | 2.2 ±20% | 0.018 | 0.014 | 9.00 | 10.50 | 4.60 | 5.00 |
| HPIT6045-3R0M-LF | 3.0 ±20% | 0.024 | 0.018 | 8.00 | 9.00 | 4.00 | 4.40 |
| HPIT6045-3R3M-LF | 3.3 ±20% | 0.024 | 0.018 | 8.00 | 9.00 | 4.00 | 4.40 |
| HPIT6045-3R9M-LF | 3.9 ±20% | 0.025 | 0.021 | 6.20 | 6.80 | 3.90 | 4.30 |
| HPIT6045-4R7M-LF | 4.7 ±20% | 0.034 | 0.026 | 6.00 | 7.50 | 3.80 | 4.20 |
| HPIT6045-6R8M-LF | 6.8 ±20% | 0.040 | 0.031 | 5.50 | 6.20 | 3.00 | 3.30 |
| HPIT6045-8R2M-LF | 8.2 ±20% | 0.045 | 0.038 | 4.50 | 5.00 | 2.85 | 3.15 |
| HPIT6045-100M-LF | 10 ±20% | 0.056 | 0.046 | 4.20 | 4.80 | 2.75 | 3.00 |
| HPIT6045-120M-LF | 12 ±20% | 0.065 | 0.050 | 4.00 | 4.50 | 2.50 | 2.75 |
| HPIT6045-150M-LF | 15 ±20% | 0.085 | 0.065 | 3.50 | 3.80 | 2.10 | 2.30 |
| HPIT6045-220M-LF | 22 ±20% | 0.116 | 0.089 | 3.20 | 3.50 | 1.80 | 2.00 |
| HPIT6045-330M-LF | 33 ±20% | 0.175 | 0.135 | 2.40 | 2.60 | 1.45 | 1.60 |
| HPIT6045-470M-LF | 47 ±20% | 0.260 | 0.200 | 2.20 | 2.30 | 1.20 | 1.30 |
| HPIT6045-560M-LF | 56 ±20% | 0.286 | 0.220 | 1.70 | 1.90 | 1.15 | 1.25 |
| HPIT6045-680M-LF | 68 ±20% | 0.325 | 0.250 | 1.65 | 1.80 | 1.10 | 1.20 |
| HPIT6045-820M-LF | 82 ±20% | 0.408 | 0.340 | 1.40 | 1.50 | 1.05 | 1.15 |
| HPIT6045-101M-LF | 100 ±20% | 0.468 | 0.390 | 1.30 | 1.40 | 1.00 | 1.10 |
| HPIT6045-121M-LF | 120 ±20% | 0.585 | 0.450 | 1.10 | 1.20 | 0.90 | 1.02 |
| HPIT6045-151M-LF | 150 ±20% | 0.740 | 0.570 | 0.95 | 1.15 | 0.80 | 0.91 |
| HPIT6045-221M-LF | 220 ±20% | 1.050 | 0.880 | 0.70 | 1.00 | 0.50 | 0.60 |
| HPIT6045-331M-LF | 330 ±20% | 1.464 | 1.220 | 0.70 | 0.77 | 0.58 | 0.64 |
| HPIT6045-471M-LF | 470 ±20% | 2.300 | 1.770 | 0.53 | 0.60 | 0.45 | 0.50 |
| HPIT6045-102M-LF | 1000 ±20% | 5.650 | 4.700 | 0.40 | 0.45 | 0.30 | 0.35 |
Power Inductors
HPIT8040
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | SRF | |
|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Max. | (MHz) | |
| HPIT8040-R47N-LF | 0.47 ±30% | 0.007 | 0.005 | 16.50 | 8.00 | 110.00 |
| HPIT8040-R68N-LF | 0.68 ±30% | 0.007 | 0.005 | 15.50 | 8.00 | 104.00 |
| HPIT8040-R82M-LF | 0.82 ±20% | 0.008 | 0.006 | 15.20 | 7.80 | 95.00 |
| HPIT8040-R90M-LF | 0.90 ±20% | 0.008 | 0.006 | 11.00 | 7.80 | 92.00 |
| HPIT8040-1R0M-LF | 1.0 ±20% | 0.008 | 0.006 | 12.00 | 7.80 | 90.00 |
| HPIT8040-1R4M-LF | 1.4 ±20% | 0.009 | 0.007 | 9.00 | 7.00 | 68.00 |
| HPIT8040-1R5M-LF | 1.5 ±20% | 0.010 | 0.008 | 10.00 | 7.00 | 67.00 |
| HPIT8040-1R8M-LF | 1.8 ±20% | 0.012 | 0.009 | 9.50 | 6.30 | 48.00 |
| HPIT8040-2R0M-LF | 2.0 ±20% | 0.012 | 0.009 | 9.25 | 6.30 | 42.00 |
| HPIT8040-2R2M-LF | 2.2 ±20% | 0.016 | 0.012 | 8.30 | 5.15 | 41.00 |
| HPIT8040-3R0M-LF | 3.0 ±20% | 0.018 | 0.014 | 7.10 | 4.95 | 30.00 |
| HPIT8040-3R3M-LF | 3.3 ±20% | 0.020 | 0.015 | 7.52 | 4.90 | 28.00 |
| HPIT8040-3R6M-LF | 3.6 ±20% | 0.020 | 0.015 | 7.52 | 4.90 | 30.00 |
| HPIT8040-3R9M-LF | 3.9 ±20% | 0.022 | 0.017 | 6.30 | 4.35 | 26.00 |
| HPIT8040-4R7M-LF | 4.7 ±20% | 0.023 | 0.018 | 6.00 | 4.10 | 23.00 |
| HPIT8040-5R1M-LF | 5.1 ±20% | 0.025 | 0.019 | 6.00 | 4.10 | 23.00 |
| HPIT8040-5R6M-LF | 5.6 ±20% | 0.027 | 0.021 | 6.00 | 3.85 | 24.00 |
| HPIT8040-6R2M-LF | 6.2 ±20% | 0.027 | 0.021 | 5.10 | 3.85 | 20.00 |
| HPIT8040-6R8M-LF | 6.8 ±20% | 0.031 | 0.024 | 4.95 | 3.70 | 20.00 |
| HPIT8040-8R2M-LF | 8.2 ±20% | 0.034 | 0.026 | 4.30 | 3.45 | 17.00 |
| HPIT8040-100M-LF | 10 ±20% | 0.038 | 0.029 | 4.30 | 3.30 | 15.00 |
| HPIT8040-120M-LF | 12 ±20% | 0.053 | 0.041 | 3.55 | 2.85 | 12.00 |
| HPIT8040-150M-LF | 15 ±20% | 0.061 | 0.047 | 3.25 | 2.60 | 12.00 |
| HPIT8040-180M-LF | 18 ±20% | 0.068 | 0.052 | 3.10 | 2.45 | 11.00 |
| HPIT8040-220M-LF | 22 ±20% | 0.086 | 0.066 | 2.80 | 2.20 | 9.50 |
| HPIT8040-270M-LF | 27 ±20% | 0.101 | 0.078 | 2.60 | 2.00 | 9.00 |
| HPIT8040-330M-LF | 33 ±20% | 0.125 | 0.096 | 2.20 | 1.80 | 8.00 |
| HPIT8040-360M-LF | 36 ±20% | 0.133 | 0.102 | 2.10 | 1.75 | 7.80 |
| HPIT8040-390M-LF | 39 ±20% | 0.133 | 0.102 | 2.10 | 1.75 | 7.80 |
| HPIT8040-430M-LF | 43 ±20% | 0.147 | 0.113 | 1.90 | 1.65 | 7.50 |
| HPIT8040-470M-LF | 47 ±20% | 0.177 | 0.136 | 1.80 | 1.55 | 6.50 |
| HPIT8040-510M-LF | 51 ±20% | 0.185 | 0.142 | 1.70 | 1.50 | 6.40 |
| HPIT8040-560M-LF | 56 ±20% | 0.192 | 0.148 | 1.65 | 1.45 | 6.40 |
| HPIT8040-620M-LF | 62 ±20% | 0.237 | 0.182 | 1.55 | 1.30 | 6.30 |
| HPIT8040-680M-LF | 68 ±20% | 0.252 | 0.194 | 1.50 | 1.25 | 5.00 |
| HPIT8040-750M-LF | 75 ±20% | 0.274 | 0.211 | 1.40 | 1.20 | 4.90 |
| HPIT8040-820M-LF | 82 ±20% | 0.293 | 0.225 | 1.30 | 1.15 | 5.70 |
| HPIT8040-910M-LF | 91 ±20% | 0.354 | 0.272 | 1.20 | 1.05 | 5.00 |
| HPIT8040-101M-LF | 100 ±20% | 0.377 | 0.290 | 1.20 | 1.00 | 4.20 |
| HPIT8040-121M-LF | 120 ±20% | 0.428 | 0.329 | 1.15 | 0.95 | 3.50 |
| HPIT8040-151M-LF | 150 ±20% | 0.533 | 0.410 | 1.10 | 0.85 | 3.50 |
| HPIT8040-221M-LF | 220 ±20% | 0.702 | 0.540 | 0.85 | 0.80 | 3.50 |
| HPIT8040-331M-LF | 330 ±20% | 1.066 | 0.820 | 0.70 | 0.65 | 2.80 |
Power Inductors
HPIT8065
| HONGDA Part No. | Inductance | DCR (Ω) | Isat(A) | Irms(A) | |||
|---|---|---|---|---|---|---|---|
| (uH) | Max. | Typ. | Max. | Typ. | Max. | Typ. | |
| HPIT8065-1R0M-LF | 1.0 ±20% | 0.011 | 0.008 | 20.00 | 22.00 | 7.30 | 8.00 |
| HPIT8065-2R2M-LF | 2.2 ±20% | 0.016 | 0.013 | 15.00 | 18.00 | 6.30 | 7.00 |
| HPIT8065-3R3M-LF | 3.3 ±20% | 0.018 | 0.015 | 9.70 | 10.50 | 5.20 | 6.00 |
| HPIT8065-4R7M-LF | 4.7 ±20% | 0.022 | 0.018 | 8.50 | 9.50 | 5.00 | 5.70 |
| HPIT8065-5R6M-LF | 5.6 ±20% | 0.026 | 0.022 | 8.50 | 9.50 | 4.60 | 5.50 |
| HPIT8065-6R8M-LF | 6.8 ±20% | 0.028 | 0.024 | 7.50 | 8.30 | 4.50 | 5.10 |
| HPIT8065-8R2M-LF | 8.2 ±20% | 0.031 | 0.026 | 7.00 | 8.00 | 4.40 | 4.80 |
| HPIT8065-100M-LF | 10 ±20% | 0.043 | 0.036 | 6.50 | 7.50 | 3.50 | 4.00 |
| HPIT8065-220M-LF | 22 ±20% | 0.065 | 0.054 | 4.50 | 5.00 | 2.90 | 3.30 |
| HPIT8065-470M-LF | 47 ±20% | 0.144 | 0.120 | 3.00 | 3.50 | 2.05 | 2.30 |
| HPIT8065-500M-LF | 50 ±20% | 0.132 | 0.110 | 3.00 | 3.50 | 2.10 | 2.30 |
| HPIT8065-700M-LF | 70 ±20% | 0.180 | 0.150 | 2.50 | 2.80 | 1.80 | 2.00 |
| HPIT8065-101M-LF | 100 ±20% | 0.280 | 0.233 | 2.10 | 2.50 | 1.35 | 1.50 |
| HPIT8065-151M-LF | 150 ±20% | 0.430 | 0.350 | 1.70 | 2.00 | 1.00 | 1.15 |
| HPIT8065-201M-LF | 200 ±20% | 0.640 | 0.533 | 1.65 | 1.80 | 0.95 | 1.00 |
| HPIT8065-221M-LF | 220 ±20% | 0.649 | 0.541 | 1.40 | 1.60 | 0.90 | 0.95 |
| HPIT8065-301M-LF | 300 ±20% | 0.818 | 0.682 | 1.30 | 1.50 | 0.85 | 0.90 |
| HPIT8065-331M-LF | 330 ±20% | 0.840 | 0.700 | 1.10 | 1.30 | 0.80 | 0.90 |
| HPIT8065-431M-LF | 430 ±20% | 1.200 | 1.000 | 1.00 | 1.15 | 0.65 | 0.70 |
| HPIT8065-471M-LF | 470 ±20% | 1.500 | 1.250 | 1.00 | 1.20 | 0.60 | 0.68 |
| HPIT8065-501M-LF | 500 ±20% | 1.550 | 1.290 | 1.00 | 1.10 | 0.60 | 0.65 |
| HPIT8065-801M-LF | 800 ±20% | 2.400 | 2.000 | 0.80 | 0.90 | 0.55 | 0.60 |
| HPIT8065-102M-LF | 1000 ±20% | 2.820 | 2.350 | 0.70 | 0.76 | 0.45 | 0.50 |
| HPIT8065-152M-LF | 1500 ±20% | 4.380 | 3.650 | 0.54 | 0.61 | 0.35 | 0.38 |
| HPIT8065-202M-LF | 2000 ±20% | 5.800 | 4.800 | 0.50 | 0.55 | 0.30 | 0.33 |
| HPIT8065-222M-LF | 2200 ±20% | 6.000 | 5.000 | 0.45 | 0.51 | 0.27 | 0.31 |
| HPIT8065-332M-LF | 3300 ±20% | 8.760 | 7.300 | 0.37 | 0.41 | 0.23 | 0.26 |
| HPIT8065-472M-LF | 4700 ±20% | 14.520 | 12.150 | 0.32 | 0.35 | 0.19 | 0.21 |
| HPIT8065-682M-LF | 6800 ±20% | 22.200 | 18.500 | 0.28 | 0.31 | 0.15 | 0.17 |
Imate vprašanja o naši ponudbi?
Power Inductors
Močnostni induktorji - Učinkovita moč za sodobno elektroniko
Močnostni induktorji so ključni sestavni del visoko zmogljive elektronike. Zagotavljajo stabilno napajanje, zmanjšujejo elektromagnetne motnje in izboljšujejo učinkovitost elektronskih vezij. Posebej nepogrešljivi so v aplikacijah, kot so stikalni napajalniki, pretvorniki DC-DC in sodobna visokofrekvenčna vezja.
Podjetje Rotima AG kot uradni distributer tesno sodeluje s podjetjem Hongda Capacitors, vodilnim proizvajalcem induktorjev.
Naša ponudba vključuje večplastne induktorje s čipi, induktorje za oblikovanje majhnih in velikih dimenzij ter induktorje z žično ovojnico - prava rešitev za vsako aplikacijo. Z visoko kakovostjo in inovativno proizvodno tehnologijo naši izdelki postavljajo standarde na področju močnostne elektronike.
Ne glede na to, ali gre za kompaktne zasnove za prostorsko varčne konstrukcije ali visokotokovne induktorje za visokozmogljive aplikacije - dobavljamo zanesljive komponente za največjo učinkovitost.
Podjetje Rotima AG kot uradni distributer tesno sodeluje s podjetjem Hongda Capacitors, vodilnim proizvajalcem induktorjev.
Naša ponudba vključuje večplastne induktorje s čipi, induktorje za oblikovanje majhnih in velikih dimenzij ter induktorje z žično ovojnico - prava rešitev za vsako aplikacijo. Z visoko kakovostjo in inovativno proizvodno tehnologijo naši izdelki postavljajo standarde na področju močnostne elektronike.
Ne glede na to, ali gre za kompaktne zasnove za prostorsko varčne konstrukcije ali visokotokovne induktorje za visokozmogljive aplikacije - dobavljamo zanesljive komponente za največjo učinkovitost.
Naša ponudba drugih induktorjev:
Coil Inductors
Navijalni induktor je tehnologija za prenos signalov v elektronskih komponentah za površinsko montažo (SMD). Omogoča kompaktno, natančno in zanesljivo obdelavo signalov v tiskanih vezjih sodobne elektronike. Pogosto se uporablja v visokofrekvenčnih, komunikacijskih in nadzornih sistemih ter izboljšuje zmogljivost in miniaturizacijo elektronskih naprav.
RF tuljave
Čipovni induktorji so induktorji, ki nadzorujejo visokofrekvenčne signale v elektronskih vezjih. Uporabljajo se v filtrih, oscilatorjih in RF ojačevalnikih za dušenje, ojačevanje ali oblikovanje signalov. Tipične aplikacije se uporabljajo v komunikacijski tehnologiji, medicinski tehnologiji in tehnologiji visokofrekvenčnih senzorjev. Njihova zasnova vpliva na induktivnost, frekvenčno območje in izgube.
Transformator in transformator
Transformatorji in transformatorji so električne komponente za usklajevanje napetosti, prenos energije in izolacijo signalov. Transformatorji pretvarjajo izmenične napetosti z elektromagnetno indukcijo, medtem ko se transformatorji uporabljajo posebej za prilagajanje impedance ali prenos signalov. Uporabljajo se v napajalnih enotah, avdio tehniki in industrijski elektroniki. Njihova učinkovitost in zasnova se razlikujeta glede na področje uporabe.
Imate vprašanja o naši ponudbi?
Power Inductors
Struktura in delovanje močnostnih induktorjev
Močnostni induktorji so sestavljeni iz tuljave, ki je navita okoli magnetnega jedra. Jedro je lahko izdelano iz ferita ali kovinskih zlitin in se uporablja za ojačitev magnetnega polja. Glede na zasnovo obstajajo različne vrste: Večplastni induktorji s čipi so sestavljeni iz več plasti, medtem ko so oblikovani induktorji vgrajeni v plastiko in je zanje značilna visoka mehanska stabilnost. Pri žično navitih induktorjih se uporabljajo navite bakrene žice, ki zagotavljajo največjo učinkovitost.
Ti induktorji uravnavajo tokovne tokove, shranjujejo energijo in zmanjšujejo motnje, kar je bistveno za stikalne napajalnike, pretvornike DC-DC in visokofrekvenčne aplikacije. Z najsodobnejšo proizvodno tehnologijo podjetja Hongda Capacitors družba Rotima AG ponuja rešitve za najvišje zahteve glede zmogljivosti.
Ti induktorji uravnavajo tokovne tokove, shranjujejo energijo in zmanjšujejo motnje, kar je bistveno za stikalne napajalnike, pretvornike DC-DC in visokofrekvenčne aplikacije. Z najsodobnejšo proizvodno tehnologijo podjetja Hongda Capacitors družba Rotima AG ponuja rešitve za najvišje zahteve glede zmogljivosti.
Kaj lahko storimo za vas?
Kontaktirajte naše strokovnjake za izdelke
Kaj lahko storimo za vas?
Kontaktirajte naše strokovnjake za izdelke
Imate vprašanja o:
Power Inductors
Pošljite nam kratko sporočilo in z veseljem bomo odgovorili na vaša vprašanja po telefonu ali e-pošti.
Vprašanja?
Pišite nam!
Želite izvedeti več o naših visokokakovostnih izdelkih?
Imamo veliko skladišče, kratke dobavne roke in brezcarinsko dostavo!
Ne oklevajte in nas kontaktirajte, z veseljem vam bomo osebnosvetovali.
Ne oklevajte in nas kontaktirajte, z veseljem vam bomo osebnosvetovali.
Vaše kontaktne osebe
Zahtevajte povratni klic
Želite osebno telefonsko svetovanje?
Enostavno izpolnite obrazec in oglasili se vam bomo.
Katere so prednosti uporabe enosmernih napetostnih transformatorjev pred izmeničnimi napetostnimi transformatorji?
Katere so prednosti uporabe enosmernih napetostnih transformatorjev pred izmeničnimi napetostnimi transformatorji?
X
Dodatne informacije o močnostnih induktorjih
Močnostni induktorji so osrednji sestavni del sodobne elektronike in imajo pomembno vlogo pri prenosu energije, stabilizaciji napetosti in odpravljanju motenj. V naslednjih vprašanjih in odgovorih osvetljujemo najpomembnejše vidike močnostnih induktorjev: Katere vrste obstajajo? Kje se uporabljajo? Katere prednosti imajo v primerjavi s klasičnimi induktorji THT? In na kaj morate biti pozorni pri njihovi izbiri?
Katere so prednosti močnostnih tuljav pred tuljavami THT?
Močnostni induktorji imajo v primerjavi z induktorji z olovom (THT) več prednosti. So kompaktnejši in omogočajo večjo gostoto komponent na tiskanih vezjih, kar je še posebej koristno pri sodobnih zasnovah, ki varčujejo s prostorom.
Zagotavljajo tudi bolj enakomerno spajkanje, saj so spajkani neposredno na tiskano vezje in zato zagotavljajo mehansko stabilnost. Druga prednost je avtomatizirano sestavljanje, ki omogoča natančnejšo in hitrejšo proizvodnjo. Optimizirane so tudi električne lastnosti: Električne lastnosti močnostnih induktorjev so pogosto manjše, zato so še posebej učinkoviti pri visokofrekvenčnih in močnostnih aplikacijah.
Zagotavljajo tudi bolj enakomerno spajkanje, saj so spajkani neposredno na tiskano vezje in zato zagotavljajo mehansko stabilnost. Druga prednost je avtomatizirano sestavljanje, ki omogoča natančnejšo in hitrejšo proizvodnjo. Optimizirane so tudi električne lastnosti: Električne lastnosti močnostnih induktorjev so pogosto manjše, zato so še posebej učinkoviti pri visokofrekvenčnih in močnostnih aplikacijah.
Preberite več
Katere vrste močnostnih tuljav obstajajo in kje se uporabljajo?
Obstajajo različne vrste močnostnih induktorjev, vključno z večplastnimi induktorji s čipi, induktorji z oblikovanjem in induktorji z žično navitjem. Večplastni induktorji s čipi so idealni za visokofrekvenčne aplikacije in kompaktna vezja.
Majhni oblikovni induktorji se uporabljajo v mobilnih napravah ali aplikacijah interneta stvari, medtem ko se veliki oblikovni induktorji uporabljajo za visokotokovne aplikacije v industriji ali elektromobilnosti. Žično naviti induktorji zagotavljajo največjo energetsko učinkovitost in so še posebej primerni za močnostno elektroniko, na primer v stikalnih napajalnikih ali pretvornikih DC-DC. Zaradi svoje zasnove in posebnih materialov so idealni za različne aplikacije v sodobni elektroniki.
Majhni oblikovni induktorji se uporabljajo v mobilnih napravah ali aplikacijah interneta stvari, medtem ko se veliki oblikovni induktorji uporabljajo za visokotokovne aplikacije v industriji ali elektromobilnosti. Žično naviti induktorji zagotavljajo največjo energetsko učinkovitost in so še posebej primerni za močnostno elektroniko, na primer v stikalnih napajalnikih ali pretvornikih DC-DC. Zaradi svoje zasnove in posebnih materialov so idealni za različne aplikacije v sodobni elektroniki.
Preberite več
Zakaj so močnostni induktorji pomembni za pretvornike DC-DC?
Pretvorniki DC-DC za učinkovito pretvorbo in stabilizacijo napetosti potrebujejo močnostne induktorje. V svojem magnetnem polju shranjujejo energijo in jo ciljno sproščajo, da zmanjšajo nihanja v tokovnem toku. S tem se izravna izhodna napetost, električne naprave pa so stalno napajane.
To je še posebej pomembno za mobilne naprave, industrijsko elektroniko in avtomobilsko tehnologijo. Brez ustreznih induktorjev bi se zmogljivost pretvornikov zmanjšala, kar bi povzročilo večje izgube in manjšo energetsko učinkovitost.
To je še posebej pomembno za mobilne naprave, industrijsko elektroniko in avtomobilsko tehnologijo. Brez ustreznih induktorjev bi se zmogljivost pretvornikov zmanjšala, kar bi povzročilo večje izgube in manjšo energetsko učinkovitost.
Preberite več
Kako močnostni induktorji vplivajo na elektromagnetno združljivost (EMC)?
Močnostni induktorji imajo odločilno vlogo pri zmanjševanju elektromagnetnih motenj. Filtrirajo visokofrekvenčne signale z dušenjem in odvajanjem motečih nihanj. To je še posebej pomembno v občutljivih vezjih, kot so visokofrekvenčne aplikacije ali sistemi za obdelavo signalov, kjer lahko elektromagnetne motnje (EMI) poslabšajo delovanje komponent.
Žično naviti induktorji imajo še posebej visok učinek dušenja, medtem ko imajo oblikovani induktorji z zaprto zasnovo dodatne zaščitne lastnosti. Izbira pravega induktorja zato bistveno izboljša elektromagnetno združljivost naprave in zagotavlja zanesljiv prenos signala.
Žično naviti induktorji imajo še posebej visok učinek dušenja, medtem ko imajo oblikovani induktorji z zaprto zasnovo dodatne zaščitne lastnosti. Izbira pravega induktorja zato bistveno izboljša elektromagnetno združljivost naprave in zagotavlja zanesljiv prenos signala.
Preberite več
Kateri dejavniki vplivajo na izbiro pravega močnostnega induktorja?
Izbira pravega močnostnega induktorja je odvisna od več dejavnikov. Pomembni so induktivnost (H), tok nasičenja (A) in upornost (Ω), saj te vrednosti določajo učinkovitost delovanja komponente. Vlogo ima tudi zasnova: večplastni induktorji s čipi so idealni za aplikacije, ki varčujejo s prostorom, medtem ko induktorji, naviti na žico, ponujajo visoko tokovno zmogljivost.
Oblikovani induktorji so še posebej robustni in vzdržljivi. Upoštevati je treba tudi delovno temperaturo, saj lahko visoke temperature vplivajo na induktivnost. Pri podjetju Rotima AG lahko stranke najdejo optimalno rešitev za svoje individualne zahteve.
Oblikovani induktorji so še posebej robustni in vzdržljivi. Upoštevati je treba tudi delovno temperaturo, saj lahko visoke temperature vplivajo na induktivnost. Pri podjetju Rotima AG lahko stranke najdejo optimalno rešitev za svoje individualne zahteve.
Preberite več
