Keramični kondenzatorji (MLCC)
Naš uradni prodajni partner: Hongda Capacitors
Hongda Capacitors je eden od vodilnih proizvajalcev kondenzatorjev s čipi z desetletji izkušenj in najsodobnejšo proizvodno tehnologijo. Podjetje ima certifikata ISO9001:2015 in IATF16949 ter zastopa najvišje standarde kakovosti v avtomobilskem, elektronskem in industrijskem sektorju.
Kot uradni distribucijski partner podjetja Hongda Capacitors svojim strankam ponujamo visoko zmogljive kondenzatorje, ki jih odlikujejo zanesljivost, vzdržljivost in inovativna tehnologija.
Kot uradni distribucijski partner podjetja Hongda Capacitors svojim strankam ponujamo visoko zmogljive kondenzatorje, ki jih odlikujejo zanesljivost, vzdržljivost in inovativna tehnologija.
Paleta izdelkov naših keramičnih kondenzatorjev
Naši keramični kondenzatorji zagotavljajo najvišjo kakovost in zanesljivost za široko paleto aplikacij. Naj gre za visokofrekvenčno tehnologijo, shranjevanje energije ali filtriranje EMC - pri podjetju Rotima AG boste našli pravo rešitev.
Na zalogi imamo široko paleto keramičnih kondenzatorjev SMD in THT z različnimi dielektriki, kot so NP0, X7R in Y5V.
Vse izdelke izdeluje podjetje Hongda Capacitors in izpolnjujejo najvišje industrijske standarde. V naslednjih tabelah so na voljo podrobne specifikacije in podatkovni listi za prenos.
Na zalogi imamo široko paleto keramičnih kondenzatorjev SMD in THT z različnimi dielektriki, kot so NP0, X7R in Y5V.
Vse izdelke izdeluje podjetje Hongda Capacitors in izpolnjujejo najvišje industrijske standarde. V naslednjih tabelah so na voljo podrobne specifikacije in podatkovni listi za prenos.
HLC
| Dielectric | NP0, , X7R, X5R, Y5V |
| Capacitance Range | 0.1pF to 0.27μF, , 100pF to 47μF, 100pF to 220μF, 0.01μF to 100μF |
| Capacitance Tolerance | Cap≤ 5pF: A (±0.05pF), B (±0.1pF), C (±0.25pF), 5pF |
| Rated Voltage (WVDC) | 10V, 16V, 25V, 50V, 100V, , 4V, 6.3V, 10V, 16V, 25V, 50V, 100V |
| Capacitance Characteristic | 0±30ppm/°C |
| Termination | Ni/Sn (lead-free termination), |
MQ
| L (Length) | 1-1,6±0.15, 1,4±0.64, 2,79-9,65, 2±0.20 |
| W (Width) | 0,5±0.10, 1,4±0.38, 2,79±0.51, 0,81±0.15, 1,25±0.20, 6,5±0.25, 9,85±0.30 |
| T min | 0,51-0,76 |
| T max | 0,55-4,32 |
| B | 0,15～0.35, 0,25-0,38, 0,35±0.15, 0,5±0.25, 1-1,2 max |
Keramični kondenzatorji za filtre EMC in zaščito pred motnjami
Nakup keramičnih kondenzatorjev
- Vsestranska uporaba
- Kompakten in zmogljiv
- Vsestranska uporaba
- Kakovost z močnim partnerstvom
Keramični kondenzatorji v praksi - vsestranska uporaba v elektroniki
Keramične kondenzatorje najdemo v skoraj vsej sodobni elektroniki. Imajo osrednjo vlogo v močnostni elektroniki, komunikacijskih sistemih in industrijskih nadzornih sistemih. Zaradi hitrega odzivnega časa in visoke dielektrične trdnosti so še posebej primerni za glajenje napetosti, odpravljanje elektromagnetnih motenj (EMC filtriranje) in obdelavo visokofrekvenčnih signalov.
Klasičen primer uporabe je napajanje mikroprocesorjev. Tu keramični kondenzatorji stabilizirajo napetost in preprečujejo motnje zaradi hitrih preklopov. Uporabljajo se tudi pri krmiljenju motorjev in močnostni elektroniki za dušenje napetostnih konic in zaščito občutljivih komponent.
Zaradi robustne zasnove in temperaturne odpornosti se uporabljajo tudi v ekstremnih okoljih, na primer v avtomobilski industriji ali v napravah medicinske tehnologije. Keramični kondenzatorji podjetja Hongda Capacitors, ki jih prodaja podjetje Rotima AG, so zanesljiva rešitev za številne tehnične izzive.
Klasičen primer uporabe je napajanje mikroprocesorjev. Tu keramični kondenzatorji stabilizirajo napetost in preprečujejo motnje zaradi hitrih preklopov. Uporabljajo se tudi pri krmiljenju motorjev in močnostni elektroniki za dušenje napetostnih konic in zaščito občutljivih komponent.
Zaradi robustne zasnove in temperaturne odpornosti se uporabljajo tudi v ekstremnih okoljih, na primer v avtomobilski industriji ali v napravah medicinske tehnologije. Keramični kondenzatorji podjetja Hongda Capacitors, ki jih prodaja podjetje Rotima AG, so zanesljiva rešitev za številne tehnične izzive.
Imate vprašanja o naši ponudbi?
Keramični kondenzatorji (MLCC)
Čipovi upori
HLC
| Dielectric | Capacitance Range | Capacitance Tolerance | Rated Voltage (WVDC) | Operating Temperature | Capacitance Characteristic | Termination |
|---|---|---|---|---|---|---|
| NP0 | 0.1pF to 0.27μF | Cap≤ 5pF: A (±0.05pF), B (±0.1pF), C (±0.25pF) | 10V, 16V, 25V, 50V, 100V | -55 to +125°C | 0±30ppm/°C | Ni/Sn (lead-free termination) |
| 5pF | ||||||
| Cap≥ 10pF: F(±1%), G (±2%), J (±5%), K (±10%) | ||||||
| X7R | 100pF to 47μF | J (±5%), K (±10%), M (±20%) | 4V, 6.3V, 10V, 16V, 25V, 50V, 100V | -55 to +125°C | ±15% | Ni/Sn (lead-free termination) |
| X5R | 100pF to 220μF | K (±10%), M (±20%) | 4V, 6.3V, 10V, 16V, 25V, 50V, 100V | -55 to +85°C | ±15% | Ni/Sn (lead-free termination) |
| Y5V | 0.01μF to 100μF | M (±20%), Z (-20/+80%) | 4V, 6.3V, 10V, 16V, 25V, 50V, 100V | -25 to +85°C | -20/+80% | Ni/Sn (lead-free termination) |
 | Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
Čipovi upori
MQ
| Dimension Code | L (Length) | W (Width) | T min | T max | B |
|---|---|---|---|---|---|
| 402 | 1.00±0.15 | 0.50±0.10 | / | 0.55 | 0.15～0.35 |
| 505 | 1.40±0.64 | 1.40±0.38 | 0.51 | 1.45 | 0.25 |
| 1111 | 2.79 | 2.79±0.51 | 0.76 | 2.59 | 0.38 |
| 603 | 1.60±0.15 | 0.81±0.15 | / | 0.90 | 0.35±0.15 |
| 805 | 2.00±0.20 | 1.25±0.20 | / | 1.30 | 0.50±0.25 |
| 2525 | 5.84 | 6.50±0.25 | / | 4.19 | 1.0 max |
| 3838 | 9.65 | 9.85±0.30 | / | 4.32 | 1.2 max |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
Keramični kondenzatorji - zanesljive komponente za natančno elektroniko
Keramični kondenzatorji so sestavni del današnje elektronike. Uporabljajo se v skoraj vseh električnih vezjih - od industrijske opreme do telekomunikacijskih naprav in zelo natančnih merilnih sistemov. Zaradi svoje kompaktne zasnove, visoke temperaturne odpornosti in majhnih izgub so priljubljena izbira razvijalcev in inženirjev.
Podjetje Rotima AG kot distributer elektronskih komponent ponuja visokokakovostne keramične kondenzatorje podjetja Hongda Capacitors - vodilnega kitajskega proizvajalca. Naše izdelke odlikujejo zanesljivo delovanje, trpežni materiali in široka paleta aplikacij. Ne glede na to, ali gre za visokonapetostne aplikacije, filtriranje signalov ali shranjevanje energije - zagotavljamo prave rešitve za vaše zahteve.
Podjetje Rotima AG kot distributer elektronskih komponent ponuja visokokakovostne keramične kondenzatorje podjetja Hongda Capacitors - vodilnega kitajskega proizvajalca. Naše izdelke odlikujejo zanesljivo delovanje, trpežni materiali in široka paleta aplikacij. Ne glede na to, ali gre za visokonapetostne aplikacije, filtriranje signalov ali shranjevanje energije - zagotavljamo prave rešitve za vaše zahteve.
Imate vprašanja o naši ponudbi?
Keramični kondenzatorji (MLCC)
Naša ponudba drugih kondenzatorjev:
Elektrolitski kondenzatorji
Elektrolitski kondenzatorji so posebni kondenzatorji z visoko kapacitivnostjo, ki kot prevodni medij uporabljajo elektrolit. Shranjujejo električno energijo in se uporabljajo v napajalnikih, zvočnih in visokofrekvenčnih vezjih. Zaradi svoje polarnosti se lahko uporabljajo samo v tokokrogih z enosmernim tokom. Običajne vrste so aluminijevi, tantalovi in niobijevi elektrolitski kondenzatorji.
Plastični kondenzatorji
Filmski kondenzatorji so električni elementi za shranjevanje energije, sestavljeni iz dveh kovinskih folij ali metaliziranih plastičnih folij kot elektrod, ki sta ločeni z dielektričnim plastičnim filmom. Odlikujejo jih visoka dielektrična trdnost, nizke izgube in dolga življenjska doba, uporabljajo pa se v aplikacijah, kot so napajalniki, motorni pogoni in visokofrekvenčna tehnologija.
Tantalovi kondenzatorji
Tantalovi kondenzatorji so električni kondenzatorji s tantalom kot anodnim materialom. Odlikujejo jih visoka gostota kapacitivnosti, nizki uhajalni tokovi in stabilne električne lastnosti. Pogosto se uporabljajo v visokofrekvenčnih in miniaturnih aplikacijah ter zagotavljajo zanesljivo delovanje v mobilnih napravah, medicinski tehnologiji in industrijskih vezjih. Njihov oksidni dielektrik zagotavlja visoko dielektrično trdnost in dolgo življenjsko dobo.
Imate vprašanja o naši ponudbi?
Keramični kondenzatorji (MLCC)
Struktura in delovanje keramičnih kondenzatorjev
Keramični kondenzatorji so sestavljeni iz tanke plasti keramičnega dielektrika med dvema kovinskima elektrodama. Te plasti so zložene, sintrane in prekrite z zaščitnim premazom. Izbira keramičnega materiala vpliva na električne lastnosti - od visoke kapacitivne stabilnosti do visokofrekvenčnih lastnosti z nizkimi izgubami.
V elektroniki se keramični kondenzatorji uporabljajo za shranjevanje energije, odpravljanje motenj in filtriranje signalov. Odlikujejo jih nizki uhajalni tokovi, visoka temperaturna odpornost ter hitri cikli polnjenja in praznjenja. Keramični kondenzatorji podjetja Hongda Capacitors, ki jih distribuira družba Rotima AG, so najvišje kakovosti in optimizirani za zahtevne industrijske aplikacije.
V elektroniki se keramični kondenzatorji uporabljajo za shranjevanje energije, odpravljanje motenj in filtriranje signalov. Odlikujejo jih nizki uhajalni tokovi, visoka temperaturna odpornost ter hitri cikli polnjenja in praznjenja. Keramični kondenzatorji podjetja Hongda Capacitors, ki jih distribuira družba Rotima AG, so najvišje kakovosti in optimizirani za zahtevne industrijske aplikacije.
Kaj lahko storimo za vas?
Kontaktirajte naše strokovnjake za izdelke
Kaj lahko storimo za vas?
Kontaktirajte naše strokovnjake za izdelke
Imate vprašanja o:
Keramični kondenzatorji (MLCC)
Pošljite nam kratko sporočilo in z veseljem bomo odgovorili na vaša vprašanja po telefonu ali e-pošti.
Vprašanja?
Pišite nam!
Želite izvedeti več o naših visokokakovostnih izdelkih?
Imamo veliko skladišče, kratke dobavne roke in brezcarinsko dostavo!
Ne oklevajte in nas kontaktirajte, z veseljem vam bomo osebnosvetovali.
Ne oklevajte in nas kontaktirajte, z veseljem vam bomo osebnosvetovali.
Vaše kontaktne osebe
Zahtevajte povratni klic
Želite osebno telefonsko svetovanje?
Enostavno izpolnite obrazec in oglasili se vam bomo.
Katere so prednosti uporabe enosmernih napetostnih transformatorjev pred izmeničnimi napetostnimi transformatorji?
Katere so prednosti uporabe enosmernih napetostnih transformatorjev pred izmeničnimi napetostnimi transformatorji?
X
Pogosta vprašanja o keramičnih kondenzatorjih
V rubriki Pogosta vprašanja odgovarjamo na najpomembnejša vprašanja o keramičnih kondenzatorjih. Ne glede na to, ali gre za tehnične podrobnosti, možnosti uporabe ali kakovostne lastnosti - tukaj boste našli strnjena in razumljiva pojasnila. Družba Rotima AG kot distributer elektronskih komponent ponuja visokokakovostne keramične kondenzatorje podjetja Hongda Capacitors, ki izpolnjujejo najvišje industrijske zahteve.
Za kaj se keramični kondenzatorji uporabljajo v industriji?
Keramični kondenzatorji so bistvene komponente v številnih industrijskih aplikacijah. Uporabljajo se za stabilizacijo napetosti, visokofrekvenčno filtriranje in zaščito občutljive elektronike pred napetostnimi konicami. V močnostni elektroniki se na primer uporabljajo v pretvornikih DC-DC za glajenje izhodne napetosti. V avtomobilski industriji imajo pomembno vlogo v krmilnih enotah in senzorjih, saj so odporni na visoke temperature in vibracije.
Keramični kondenzatorji so nepogrešljivi tudi v medicinskih napravah za stabilizacijo signalov in zmanjšanje motenj. Še posebej so iskani v telekomunikacijah, kjer zagotavljajo signale brez motenj v visokofrekvenčnih tokokrogih. Keramični kondenzatorji podjetja Hongda Capacitors, ki jih distribuira družba Rotima AG, ponujajo zanesljivo rešitev za številne industrijske izzive.
Keramični kondenzatorji so nepogrešljivi tudi v medicinskih napravah za stabilizacijo signalov in zmanjšanje motenj. Še posebej so iskani v telekomunikacijah, kjer zagotavljajo signale brez motenj v visokofrekvenčnih tokokrogih. Keramični kondenzatorji podjetja Hongda Capacitors, ki jih distribuira družba Rotima AG, ponujajo zanesljivo rešitev za številne industrijske izzive.
Preberite več
Zakaj so keramični kondenzatorji primernejši za visokofrekvenčne aplikacije?
Za keramične kondenzatorje sta značilni nizka ekvivalentna zaporedna upornost (ESR) in minimalne izgube, zato so idealni za visokofrekvenčne aplikacije. Uporabljajo se v radiofrekvenčnih vezjih za ločevanje in filtriranje interferenčnih signalov. Njihova nizka upornost in hiter odzivni čas omogočata učinkovito dušenje visokofrekvenčnega šuma v telekomunikacijski opremi in antenskih sistemih.
Prav tako lahko prenašajo visoke frekvence brez večje izgube moči, zato se uporabljajo tudi v tehnologiji 5G in satelitskih komunikacijah. Zaradi svoje stabilne kapacitivnosti v širokem frekvenčnem območju imajo prednost pred drugimi vrstami kondenzatorjev, kot so elektrolitski kondenzatorji.
Prav tako lahko prenašajo visoke frekvence brez večje izgube moči, zato se uporabljajo tudi v tehnologiji 5G in satelitskih komunikacijah. Zaradi svoje stabilne kapacitivnosti v širokem frekvenčnem območju imajo prednost pred drugimi vrstami kondenzatorjev, kot so elektrolitski kondenzatorji.
Preberite več
Kakšne so razlike med keramičnimi kondenzatorji X7R in NP0?
Keramične kondenzatorje delimo v različne razrede glede na dielektrik. Kondenzatorji NP0 (C0G) spadajo v razred 1 in zagotavljajo izjemno stabilno kapacitivnost z minimalnimi temperaturnimi in napetostnimi spremembami. Idealni so za natančne visokofrekvenčne in časovne aplikacije, saj imajo nizko toleranco kapacitivnosti. Kondenzatorji X7R spadajo v razred 2 in imajo večjo kapacitivnost, vendar so bolj odvisni od temperature.
Uporabljajo se predvsem za ločevanje, filtriranje in shranjevanje energije, kjer se ne zahteva najvišja natančnost. Medtem ko se kondenzatorji NP0 uporabljajo za občutljivo merilno elektroniko in visokofrekvenčne aplikacije, se kondenzatorji X7R prednostno uporabljajo v napajalnikih in industrijskih nadzornih sistemih. Družba Rotima AG distribuira obe različici kondenzatorjev Hongda, da bi ponudila optimalno rešitev za vsako aplikacijo.
Uporabljajo se predvsem za ločevanje, filtriranje in shranjevanje energije, kjer se ne zahteva najvišja natančnost. Medtem ko se kondenzatorji NP0 uporabljajo za občutljivo merilno elektroniko in visokofrekvenčne aplikacije, se kondenzatorji X7R prednostno uporabljajo v napajalnikih in industrijskih nadzornih sistemih. Družba Rotima AG distribuira obe različici kondenzatorjev Hongda, da bi ponudila optimalno rešitev za vsako aplikacijo.
Preberite več
Kako oblikovanje vpliva na delovanje keramičnih kondenzatorjev?
Zasnova keramičnega kondenzatorja ima velik vpliv na njegove električne lastnosti. Keramični kondenzatorji SMD (naprave za površinsko montažo) so posebej kompaktni in primerni za sodobne postavitve tiskanih vezij z visoko gostoto komponent. Imajo krajše priključne poti, kar pomeni, da imajo manjšo parazitno induktivnost, kar je velika prednost pri visokofrekvenčnih in hitrih aplikacijah.
Žične različice (kondenzatorji THT) zagotavljajo večjo mehansko stabilnost in so koristne v okoljih z močnimi vibracijami ali visokimi temperaturami, na primer v avtomobilski in industrijski elektroniki. Večplastni keramični kondenzatorji (MLCC) združujejo več plasti kapacitivnosti in zagotavljajo visoko gostoto kapacitivnosti ob minimalnih potrebah po prostoru. Podjetje Rotima AG ponuja različne izvedbe kondenzatorjev Hongda, tako da je za vsako uporabo na voljo optimalna rešitev.
Žične različice (kondenzatorji THT) zagotavljajo večjo mehansko stabilnost in so koristne v okoljih z močnimi vibracijami ali visokimi temperaturami, na primer v avtomobilski in industrijski elektroniki. Večplastni keramični kondenzatorji (MLCC) združujejo več plasti kapacitivnosti in zagotavljajo visoko gostoto kapacitivnosti ob minimalnih potrebah po prostoru. Podjetje Rotima AG ponuja različne izvedbe kondenzatorjev Hongda, tako da je za vsako uporabo na voljo optimalna rešitev.
Preberite več
Kakšno vlogo imajo keramični kondenzatorji pri filtriranju EMC?
Elektromagnetna združljivost (EMC) je ključnega pomena za elektronske sisteme brez motenj. Keramični kondenzatorji se uporabljajo za filtriranje elektromagnetne združljivosti, da bi zatrli visokofrekvenčne motnje in zagotovili delovanje občutljivih vezij. Pogosto se uporabljajo v omrežnih filtrih, stikalnih napajalnikih in krmilnih enotah za zmanjšanje prevodnih motenj.
Zlasti keramični kondenzatorji Y se uporabljajo za odvajanje motenj v zemljo, medtem ko kondenzatorji X odpravljajo visokofrekvenčne motnje v omrežnih vodih. Zaradi nizkega ESR in visoke temperaturne stabilnosti so idealna izbira za aplikacije z visokimi zahtevami glede čistosti signala. Družba Rotima AG distribuira keramične kondenzatorje Hongda Capacitors, optimizirane za elektromagnetno združljivost, ki zagotavljajo zanesljivo zaščito pred elektromagnetnimi motnjami in omogočajo skladnost z direktivami EMC.
Zlasti keramični kondenzatorji Y se uporabljajo za odvajanje motenj v zemljo, medtem ko kondenzatorji X odpravljajo visokofrekvenčne motnje v omrežnih vodih. Zaradi nizkega ESR in visoke temperaturne stabilnosti so idealna izbira za aplikacije z visokimi zahtevami glede čistosti signala. Družba Rotima AG distribuira keramične kondenzatorje Hongda Capacitors, optimizirane za elektromagnetno združljivost, ki zagotavljajo zanesljivo zaščito pred elektromagnetnimi motnjami in omogočajo skladnost z direktivami EMC.
Preberite več
