Keraamilised kondensaatorid (MLCC)
Meie ametlik müügipartner: Hongda kondensaatorid
Hongda Capacitors on üks juhtivaid kiibikondensaatorite tootjaid, kellel on aastakümnete pikkune kogemus ja tipptasemel tootmistehnoloogia. Ettevõte on ISO9001:2015 ja IATF16949 sertifitseeritud ning esindab kõrgeimaid kvaliteedistandardeid auto-, elektroonika- ja tööstussektoris.
Hongda Capacitors'i ametliku turustuspartnerina pakume oma klientidele suure jõudlusega kondensaatoreid, mida iseloomustab usaldusväärsus, vastupidavus ja uuenduslik tehnoloogia.
Hongda Capacitors'i ametliku turustuspartnerina pakume oma klientidele suure jõudlusega kondensaatoreid, mida iseloomustab usaldusväärsus, vastupidavus ja uuenduslik tehnoloogia.
Meie keraamiliste kondensaatorite tootevalik
Meie keraamilised kondensaatorid pakuvad kõrgeimat kvaliteeti ja usaldusväärsust mitmesuguste rakenduste jaoks. Olgu tegemist siis kõrgsagedustehnika, energiasalvestuse või EMC-filtreerimisega - Rotima AG-st leiate sobiva lahenduse.
Meil on laos lai valik SMD- ja THT-keraamilisi kondensaatoreid erinevate dielektriliste materjalidega, näiteks NP0, X7R ja Y5V.
Kõik tooted on valmistatud Hongda Capacitors'i poolt ja vastavad kõrgeimatele tööstuslikele standarditele. Järgnevates tabelites leiate üksikasjalikud spetsifikatsioonid ja andmelehed allalaadimiseks.
Meil on laos lai valik SMD- ja THT-keraamilisi kondensaatoreid erinevate dielektriliste materjalidega, näiteks NP0, X7R ja Y5V.
Kõik tooted on valmistatud Hongda Capacitors'i poolt ja vastavad kõrgeimatele tööstuslikele standarditele. Järgnevates tabelites leiate üksikasjalikud spetsifikatsioonid ja andmelehed allalaadimiseks.
HLC
| Dielectric | NP0, , X7R, X5R, Y5V |
| Capacitance Range | 0.1pF to 0.27μF, , 100pF to 47μF, 100pF to 220μF, 0.01μF to 100μF |
| Capacitance Tolerance | Cap≤ 5pF: A (±0.05pF), B (±0.1pF), C (±0.25pF), 5pF |
| Rated Voltage (WVDC) | 10V, 16V, 25V, 50V, 100V, , 4V, 6.3V, 10V, 16V, 25V, 50V, 100V |
| Capacitance Characteristic | 0±30ppm/°C |
| Termination | Ni/Sn (lead-free termination), |
MQ
| L (Length) | 1-1,6±0.15, 1,4±0.64, 2,79-9,65, 2±0.20 |
| W (Width) | 0,5±0.10, 1,4±0.38, 2,79±0.51, 0,81±0.15, 1,25±0.20, 6,5±0.25, 9,85±0.30 |
| T min | 0,51-0,76 |
| T max | 0,55-4,32 |
| B | 0,15～0.35, 0,25-0,38, 0,35±0.15, 0,5±0.25, 1-1,2 max |
Keraamilised kondensaatorid EMC-filtrite ja häirete kaitseks
Osta keraamilisi kondensaatoreid
- Mitmekülgselt kasutatav
- Kompaktne ja võimas
- Mitmekülgselt kasutatav
- Kvaliteet tänu tugevale partnerlusele
Keraamilised kondensaatorid praktikas - mitmekülgsed rakendused elektroonikas
Keraamilisi kondensaatoreid võib leida peaaegu kogu moodsas elektroonikas. Neil on keskne roll jõuelektroonikas, sidesüsteemides ja tööstuslikes juhtimissüsteemides. Tänu oma kiirele reaktsiooniajale ja kõrgele dielektrilisele tugevusele sobivad nad eriti hästi pingete silumiseks, elektromagnetiliste häirete summutamiseks (EMC-filtreerimine) ja kõrgsagedussignaalide töötlemiseks.
Klassikaline rakendusnäide on mikroprotsessorite toiteallikad. Siin stabiliseerivad keraamilised kondensaatorid pinget ja takistavad kiiretest lülitusoperatsioonidest põhjustatud häireid. Neid kasutatakse ka mootorite juhtimisseadmetes ja jõuelektroonikas, et summutada pingepiike ja kaitsta tundlikke komponente.
Tänu oma vastupidavale konstruktsioonile ja temperatuurikindlusele kasutatakse neid ka ekstreemsetes keskkondades, näiteks autotööstuses või meditsiinitehnoloogiaseadmetes. Rotima AG poolt müüdavad Hongda Capacitors'i keraamilised kondensaatorid pakuvad usaldusväärset lahendust paljudele tehnilistele väljakutsetele.
Klassikaline rakendusnäide on mikroprotsessorite toiteallikad. Siin stabiliseerivad keraamilised kondensaatorid pinget ja takistavad kiiretest lülitusoperatsioonidest põhjustatud häireid. Neid kasutatakse ka mootorite juhtimisseadmetes ja jõuelektroonikas, et summutada pingepiike ja kaitsta tundlikke komponente.
Tänu oma vastupidavale konstruktsioonile ja temperatuurikindlusele kasutatakse neid ka ekstreemsetes keskkondades, näiteks autotööstuses või meditsiinitehnoloogiaseadmetes. Rotima AG poolt müüdavad Hongda Capacitors'i keraamilised kondensaatorid pakuvad usaldusväärset lahendust paljudele tehnilistele väljakutsetele.
Kas teil on küsimusi meie pakkumise kohta?
Keraamilised kondensaatorid (MLCC)
Kiibitakistid
HLC
| Dielectric | Capacitance Range | Capacitance Tolerance | Rated Voltage (WVDC) | Operating Temperature | Capacitance Characteristic | Termination |
|---|---|---|---|---|---|---|
| NP0 | 0.1pF to 0.27μF | Cap≤ 5pF: A (±0.05pF), B (±0.1pF), C (±0.25pF) | 10V, 16V, 25V, 50V, 100V | -55 to +125°C | 0±30ppm/°C | Ni/Sn (lead-free termination) |
| 5pF | ||||||
| Cap≥ 10pF: F(±1%), G (±2%), J (±5%), K (±10%) | ||||||
| X7R | 100pF to 47μF | J (±5%), K (±10%), M (±20%) | 4V, 6.3V, 10V, 16V, 25V, 50V, 100V | -55 to +125°C | ±15% | Ni/Sn (lead-free termination) |
| X5R | 100pF to 220μF | K (±10%), M (±20%) | 4V, 6.3V, 10V, 16V, 25V, 50V, 100V | -55 to +85°C | ±15% | Ni/Sn (lead-free termination) |
| Y5V | 0.01μF to 100μF | M (±20%), Z (-20/+80%) | 4V, 6.3V, 10V, 16V, 25V, 50V, 100V | -25 to +85°C | -20/+80% | Ni/Sn (lead-free termination) |
 | Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
| Outline Size | L (mm) | W (mm) | T (mm) | Soldering Method | MB (mm) |
|---|---|---|---|---|---|---|
| 01R5 (0402) | 0.4±0.02 | 0.2±0.02 | 0.2±0.02 | V R | 0.10±0.03 | |
| 0201 (0603) | 0.6±0.03 | 0.3±0.03 | 0.3±0.03 | L R | 0.15±0.05 | |
| 0402 (1005) | 1.00±0.05 | 0.50±0.05 | 0.50±0.05 | N R | 0.25±0.05 | |
| 0603 (1608) | 1.60±0.10 | 0.80±0.10 | 0.80±0.07 | S R / W | 0.40±0.15 | |
| 0805 (2012) | 2.00±0.15 | 1.25±0.10 | 0.50±0.10 | H R / W | 0.50±0.10 | |
| 1206 (3216) | 3.20±0.15 | 1.60±0.15 | 0.80±0.10 | B R / W | 0.60±0.20 | |
| 1210 (3225) | 3.20±0.30 | 2.50±0.20 | 0.95±0.10 | C R | 0.75±0.25 | |
| 1808 (4520) | 4.50±0.40 | 2.03±0.25 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1812 (4532) | 4.50±0.40 | 3.20±0.30 | 1.25±0.10 | D R | 0.75±0.25 | |
| 1825 (4563) | 4.60±0.50 | 6.30±0.40 | 1.60±0.20 | G R | 2.50±0.30 | |
| 2211 (5728) | 5.70±0.50 | 2.80±0.30 | R ≧0.30 | R | 0.30 | |
| 2220 (5750) | 5.70±0.50 | 5.00±0.40 | R ≧0.30 | R | 0.30 | |
| 2225 (5763) | 5.70±0.50 | 6.30±0.40 | R ≧0.30 | R | 0.30 |
Kiibitakistid
MQ
| Dimension Code | L (Length) | W (Width) | T min | T max | B |
|---|---|---|---|---|---|
| 402 | 1.00±0.15 | 0.50±0.10 | / | 0.55 | 0.15～0.35 |
| 505 | 1.40±0.64 | 1.40±0.38 | 0.51 | 1.45 | 0.25 |
| 1111 | 2.79 | 2.79±0.51 | 0.76 | 2.59 | 0.38 |
| 603 | 1.60±0.15 | 0.81±0.15 | / | 0.90 | 0.35±0.15 |
| 805 | 2.00±0.20 | 1.25±0.20 | / | 1.30 | 0.50±0.25 |
| 2525 | 5.84 | 6.50±0.25 | / | 4.19 | 1.0 max |
| 3838 | 9.65 | 9.85±0.30 | / | 4.32 | 1.2 max |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Rated voltage | |||||
|---|---|---|---|---|---|
| 1H | 50V | 2H | 500V | 3E | 2500V |
| 2A | 100V | 2J | 600V | 3F | 3000V |
| 2C | 150V | 2K | 800V | 3V | 3600V |
| 2D | 200V | 3A | 1000V | 3H | 5000V |
| 2E | 250V | 3C | 1500V | 3L | 7200V |
| 2F | 300V | 3D | 2000V |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
| Temperature characteristic (coefficient) | The capacity is allowed to change | Temperature Range |
|---|---|---|
| M7G | 100±30ppm/℃ | -55℃~125℃ |
| C0G | 0±30ppm/℃ | -55℃~125℃ |
| X7R | ±15% | -55℃~125℃ |
Keraamilised kondensaatorid - usaldusväärsed komponendid täpse elektroonika jaoks
Keraamilised kondensaatorid on tänapäeva elektroonika lahutamatu osa. Neid kasutatakse peaaegu kõigis elektrilistes vooluahelates - alates tööstussüsteemidest ja telekommunikatsiooniseadmetest kuni täppismõõtesüsteemideni. Tänu oma kompaktsele konstruktsioonile, kõrgele temperatuurikindlusele ja väikestele kadudele on nad arendajate ja inseneride lemmikvalik.
Elektroonikakomponentide turustajana pakub Rotima AG kõrgekvaliteedilisi keraamilisi kondensaatoreid Hongda Capacitors'ilt, mis on juhtiv tootja Hiinast. Meie tooteid iseloomustab usaldusväärne jõudlus, vastupidavad materjalid ja lai kasutusala. Olgu tegemist siis kõrgepingerakenduste, signaali filtreerimise või energiasalvestusega - me pakume teie vajadustele sobivaid lahendusi.
Elektroonikakomponentide turustajana pakub Rotima AG kõrgekvaliteedilisi keraamilisi kondensaatoreid Hongda Capacitors'ilt, mis on juhtiv tootja Hiinast. Meie tooteid iseloomustab usaldusväärne jõudlus, vastupidavad materjalid ja lai kasutusala. Olgu tegemist siis kõrgepingerakenduste, signaali filtreerimise või energiasalvestusega - me pakume teie vajadustele sobivaid lahendusi.
Kas teil on küsimusi meie pakkumise kohta?
Keraamilised kondensaatorid (MLCC)
Meie muude kondensaatorite valik:
Elektrolüütkondensaatorid
Elektrolüütkondensaatorid on spetsiaalsed suure mahtuvusega kondensaatorid, mis kasutavad elektrolüüdi juhtiva keskkonnana. Nad salvestavad elektrienergiat ja neid kasutatakse toiteallikates, heli- ja kõrgsagedusahelates. Oma polaarsuse tõttu saab neid kasutada ainult alalisvooluahelates. Levinud tüübid on alumiinium-, tantaal- ja nioobiumelektrolüütkondensaatorid.
Kilekondensaatorid
Kilekondensaatorid on energiasalvestuseks mõeldud elektrilised komponendid, mis koosnevad kahest metallkilest või metalliseeritud plastkilest kui elektroodidest, mis on eraldatud dielektrilise plastkilega. Neid iseloomustab kõrge dielektriline tugevus, väikesed kaod ja pikk kasutusiga ning neid kasutatakse näiteks toiteallikates, mootoriajamites ja kõrgsagedustehnoloogias.
Tantali kondensaatorid
Tantaalkondensaatorid on elektrilised kondensaatorid, mille anoodmaterjaliks on tantaal. Neid iseloomustab suur mahtuvustihedus, väikesed lekkevoolud ja stabiilsed elektrilised omadused. Neid kasutatakse sageli kõrgsageduslikes ja miniatuursetes rakendustes ning nad pakuvad usaldusväärset toimimist mobiilsetes seadmetes, meditsiinitehnoloogias ja tööstusahelates. Nende oksiidne dielektrikum tagab suure dielektrilise tugevuse ja pika eluea.
Kas teil on küsimusi meie pakkumise kohta?
Keraamilised kondensaatorid (MLCC)
Keraamiliste kondensaatorite struktuur ja funktsioon
Keraamilised kondensaatorid koosnevad kahe metallelektroodi vahele paigutatud õhukesest keraamilisest dielektrilisest kihist. Need kihid on laotud, paagutatud ja varustatud kaitsva kattega. Keraamilise materjali valik mõjutab elektrilisi omadusi - alates suurest mahtuvuse stabiilsusest kuni madalate kadudega kõrgsageduslike omadusteni.
Elektroonikas kasutatakse keraamilisi kondensaatoreid energia salvestamiseks, häirete summutamiseks ja signaali filtreerimiseks. Neid iseloomustavad madalad lekkevoolud, kõrge temperatuurikindlus ja kiired laadimis- ja tühjendustsüklid. Rotima AG poolt turustatavad Hongda Capacitors'i keraamilised kondensaatorid pakuvad kõrgeimat kvaliteeti ja on optimeeritud nõudlike tööstuslike rakenduste jaoks.
Elektroonikas kasutatakse keraamilisi kondensaatoreid energia salvestamiseks, häirete summutamiseks ja signaali filtreerimiseks. Neid iseloomustavad madalad lekkevoolud, kõrge temperatuurikindlus ja kiired laadimis- ja tühjendustsüklid. Rotima AG poolt turustatavad Hongda Capacitors'i keraamilised kondensaatorid pakuvad kõrgeimat kvaliteeti ja on optimeeritud nõudlike tööstuslike rakenduste jaoks.
Mida me saame teie heaks teha?
Võtke ühendust meie tooteekspertidega
Mida me saame teie heaks teha?
Võtke ühendust meie tooteekspertidega
Kas teil on küsimusi:
Keraamilised kondensaatorid (MLCC)
Lihtsalt saatke meile lühike sõnum ja me vastame teie küsimustele hea meelega telefoni või e-posti teel.
Küsimusi?
Kirjutage meile!
Kas soovite rohkem teavet meie kõrgekvaliteediliste toodete kohta?
Meil on suur ladu, lühikesed tarneajad ja tollimaksuvaba tarne!
Võtke meiega julgelt ühendust, nõustame teid hea meelega isiklikult.
Võtke meiega julgelt ühendust, nõustame teid hea meelega isiklikult.
Teie kontaktisikud
Tagasikutsumise taotlemine
Kas soovite isiklikku telefoninõustamist?
Täitke lihtsalt vorm ja me võtame teiega ühendust.
Millised on alalisvoolutrafode kasutamise eelised vahelduvvoolutrafode ees?
Palun täitke allolev vorm, et laadida alla selle toote andmekaart.
Millised on alalisvoolutrafode kasutamise eelised vahelduvvoolutrafode ees?
Nüüd saate klikkida ja PDF-dokumente alla laadida nagu tavaliselt.
X
Võtke meiega ühendust
Korduma kippuvad küsimused keraamiliste kondensaatorite kohta
Meie KKK osas vastame kõige olulisematele küsimustele keraamiliste kondensaatorite kohta. Olgu tegemist tehniliste üksikasjade, võimalike rakenduste või kvaliteediomadustega - siit leiate kompaktsed ja arusaadavad selgitused. Elektroonikakomponentide turustajana pakub Rotima AG Hongda Capacitors'i kvaliteetseid keraamilisi kondensaatoreid, mis vastavad kõrgeimatele tööstuslikele nõuetele.
Milleks kasutatakse tööstuses keraamilisi kondensaatoreid?
Keraamilised kondensaatorid on olulised komponendid paljudes tööstuslikes rakendustes. Neid kasutatakse pinge stabiliseerimiseks, kõrgsageduse filtreerimiseks ja tundliku elektroonika kaitsmiseks pingepiikide eest. Võimsuselektroonikas kasutatakse neid näiteks alalisvoolu ja alalisvoolu muundurites väljundpinge silumiseks. Autotööstuses mängivad nad olulist rolli juhtimisseadmetes ja andurites, kuna nad peavad vastu kõrgetele temperatuuridele ja vibratsioonile.
Keraamilised kondensaatorid on hädavajalikud ka meditsiiniseadmetes, et stabiliseerida signaale ja vähendada häireid. Eriti nõutud on nad telekommunikatsioonis, kus nad tagavad häirevabad signaalid kõrgsagedusahelates. Rotima AG poolt müüdavad Hongda Capacitors'i keraamilised kondensaatorid pakuvad usaldusväärset lahendust paljudele tööstuslikele väljakutsetele.
Keraamilised kondensaatorid on hädavajalikud ka meditsiiniseadmetes, et stabiliseerida signaale ja vähendada häireid. Eriti nõutud on nad telekommunikatsioonis, kus nad tagavad häirevabad signaalid kõrgsagedusahelates. Rotima AG poolt müüdavad Hongda Capacitors'i keraamilised kondensaatorid pakuvad usaldusväärset lahendust paljudele tööstuslikele väljakutsetele.
Lisateave
Miks sobivad keraamilised kondensaatorid paremini kõrgsageduslike rakenduste jaoks?
Keraamilisi kondensaatoreid iseloomustab nende madal ekvivalentne jadatakistus (ESR) ja minimaalsed kaod, mis muudab need ideaalseks kõrgsageduslike rakenduste jaoks. Neid kasutatakse raadiosagedusahelates (raadiosagedusahelates) häiresignaalide lahtisidumiseks ja filtreerimiseks. Nende madal takistus ja kiire reageerimisaeg võimaldavad tõhusat kõrgsagedusliku müra summutamist telekommunikatsiooniseadmetes ja antennisüsteemides.
Samuti on nad võimelised edastama kõrgeid sagedusi ilma märkimisväärse võimsuskaduta, mistõttu neid kasutatakse ka 5G-tehnoloogias ja satelliitside puhul. Tänu stabiilsele mahtuvusele laias sagedusvahemikus on neil eelis teiste kondensaatoritüüpide, näiteks elektrolüütkondensaatorite ees.
Samuti on nad võimelised edastama kõrgeid sagedusi ilma märkimisväärse võimsuskaduta, mistõttu neid kasutatakse ka 5G-tehnoloogias ja satelliitside puhul. Tänu stabiilsele mahtuvusele laias sagedusvahemikus on neil eelis teiste kondensaatoritüüpide, näiteks elektrolüütkondensaatorite ees.
Lisateave
Millised on erinevused X7R ja NP0 keraamiliste kondensaatorite vahel?
Keraamilised kondensaatorid jagunevad eri klassidesse sõltuvalt dielektrikumist. NP0 (C0G) kondensaatorid kuuluvad 1. klassi ja pakuvad äärmiselt stabiilset mahtuvust minimaalsete temperatuuri- ja pingemuutustega. Need on ideaalsed täpsete kõrgsagedus- ja ajastusrakenduste jaoks, kuna nende mahtuvuse tolerants on väike. X7R-kondensaatorid kuuluvad 2. klassi ja on suurema mahtuvusega, kuid sõltuvad rohkem temperatuurist.
Neid kasutatakse peamiselt lahtisidumiseks, filtreerimiseks ja energia salvestamiseks, kus ei ole vaja kõrgeimat täpsust. Kui NP0-kondensaatoreid kasutatakse tundlikus mõõteelektroonikas ja HF-rakendustes, siis X7R-kondensaatoreid kasutatakse eelistatult toiteallikates ja tööstuslikes juhtimissüsteemides. Rotima AG turustab mõlemat Hongda kondensaatorite varianti, et pakkuda igale rakendusele optimaalset lahendust.
Neid kasutatakse peamiselt lahtisidumiseks, filtreerimiseks ja energia salvestamiseks, kus ei ole vaja kõrgeimat täpsust. Kui NP0-kondensaatoreid kasutatakse tundlikus mõõteelektroonikas ja HF-rakendustes, siis X7R-kondensaatoreid kasutatakse eelistatult toiteallikates ja tööstuslikes juhtimissüsteemides. Rotima AG turustab mõlemat Hongda kondensaatorite varianti, et pakkuda igale rakendusele optimaalset lahendust.
Lisateave
Kuidas mõjutab konstruktsioon keraamiliste kondensaatorite jõudlust?
Keraamilise kondensaatori konstruktsioon mõjutab oluliselt selle elektrilisi omadusi. SMD-keraamilised kondensaatorid (pinnale paigaldatavad seadmed) on eriti kompaktsed ja sobivad kaasaegsetele suure komponentide tihedusega trükkplaatidele. Neil on lühemad ühendusradad, mis tähendab, et nende parasiitne induktiivsus on väiksem - see on suur eelis kõrgsageduslikes ja kiiretes rakendustes.
Juhtmega variante (THT-kondensaatorid) pakub suuremat mehaanilist stabiilsust ja on kasulikud tugevate vibratsioonide või kõrgete temperatuuridega keskkondades, näiteks autotööstuses ja tööstuselektroonikas. Mitmekihilised keraamilised kondensaatorid (MLCC) kombineerivad mitu mahtuvuskihti ja pakuvad suurt mahtuvustihedust, vähendades samal ajal ruumivajadust. Rotima AG pakub erinevaid Hongda kondensaatorite konstruktsioone, nii et iga rakenduse jaoks on olemas optimaalne lahendus.
Juhtmega variante (THT-kondensaatorid) pakub suuremat mehaanilist stabiilsust ja on kasulikud tugevate vibratsioonide või kõrgete temperatuuridega keskkondades, näiteks autotööstuses ja tööstuselektroonikas. Mitmekihilised keraamilised kondensaatorid (MLCC) kombineerivad mitu mahtuvuskihti ja pakuvad suurt mahtuvustihedust, vähendades samal ajal ruumivajadust. Rotima AG pakub erinevaid Hongda kondensaatorite konstruktsioone, nii et iga rakenduse jaoks on olemas optimaalne lahendus.
Lisateave
Millist rolli mängivad keraamilised kondensaatorid EMC-filtreerimisel?
Elektromagnetiline ühilduvus (EMC) on väga oluline häireteta elektroonikasüsteemide jaoks. Keraamilisi kondensaatoreid kasutatakse EMC-filtreerimiseks, et summutada kõrgsageduslikke häiresignaale ja tagada tundlike vooluahelate toimimine. Neid kasutatakse sageli võrgufiltrites, lülitusvooluallikates ja juhtimisseadmetes, et vähendada juhitavaid häireid.
Eriti Y-keraamilisi kondensaatoreid kasutatakse häirete hajutamiseks maasse, samas kui X-kondensaatorid kõrvaldavad kõrgsageduslikke häireid võrguliinides. Nende madal ESR ja kõrge temperatuuristabiilsus teevad neist ideaalse valiku kõrge signaalipuhtuse nõudega rakenduste jaoks. Rotima AG turustab Hongda Capacitors'i EMC-optimeeritud keraamilisi kondensaatoreid, mis pakuvad usaldusväärset kaitset elektromagnetiliste häirete eest ja hõlbustavad EMC-direktiivide täitmist.
Eriti Y-keraamilisi kondensaatoreid kasutatakse häirete hajutamiseks maasse, samas kui X-kondensaatorid kõrvaldavad kõrgsageduslikke häireid võrguliinides. Nende madal ESR ja kõrge temperatuuristabiilsus teevad neist ideaalse valiku kõrge signaalipuhtuse nõudega rakenduste jaoks. Rotima AG turustab Hongda Capacitors'i EMC-optimeeritud keraamilisi kondensaatoreid, mis pakuvad usaldusväärset kaitset elektromagnetiliste häirete eest ja hõlbustavad EMC-direktiivide täitmist.
Lisateave
