FEP/EFEP double wall heat shrink tubing Dealer
- Large selection of FEP/EFEP double-wall shrink tubing
- For the electrical engineering and electronics business
- A direct line instead of a waiting loop - we are there for you
Over 60 years of experience
in the electrical engineering and electronics industry
Short delivery times
through optimized warehousing
Germany and Switzerland
Dual location strength and reliability
FEP/EFEP double-wall shrink tubing in our range:
FEP/EFEP double wall heat shrink tubing - Size chart
| Grösse | Innendurchmesser vor Schrumpfung in mm | Innendurchmesser nach Schrumpfung in mm | Wandstärke nom. Total in mm |
| LTDS-046 | 1,17 | 0,00 | N/A |
| LTDS-082 | 2,09 | 0,00 | N/A |
| LTDS-112 | 2,85 | 0,00 | N/A |
| LTDS-163 | 4,14 | 0,00 | N/A |
| LTDS-200 | 5,08 | 0,00 | N/A |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Size | Inner diameter before shrinkage in mm | Inner diameter after shrinkage in mm | Wall thickness nom. Total in mm |
| LTDS-046 | 1,17 | 0,00 | N/A |
| LTDS-082 | 2,09 | 0,00 | N/A |
| LTDS-112 | 2,85 | 0,00 | N/A |
| LTDS-163 | 4,14 | 0,00 | N/A |
| LTDS-200 | 5,08 | 0,00 | N/A |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Talla | Diámetro interior antes de la contracción en mm | Diámetro interior tras contracción en mm | Espesor de pared nom. Total en mm |
| LTDS-046 | 1,17 | 0,00 | N/A |
| LTDS-082 | 2,09 | 0,00 | N/A |
| LTDS-112 | 2,85 | 0,00 | N/A |
| LTDS-163 | 4,14 | 0,00 | N/A |
| LTDS-200 | 5,08 | 0,00 | N/A |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Rozmiar | Średnica wewnętrzna przed skurczem w mm | Średnica wewnętrzna po skurczeniu w mm | Nom. grubość ścianki Całkowita w mm |
| LTDS-046 | 1,17 | 0,00 | NIE DOTYCZY |
| LTDS-082 | 2,09 | 0,00 | NIE DOTYCZY |
| LTDS-112 | 2,85 | 0,00 | NIE DOTYCZY |
| LTDS-163 | 4,14 | 0,00 | NIE DOTYCZY |
| LTDS-200 | 5,08 | 0,00 | NIE DOTYCZY |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Taille | Diamètre intérieur avant rétrécissement en mm | Diamètre intérieur après rétrécissement en mm | Épaisseur de paroi nom. Total en mm |
| LTDS-046 | 1,17 | 0,00 | N/A |
| LTDS-082 | 2,09 | 0,00 | N/A |
| LTDS-112 | 2,85 | 0,00 | N/A |
| LTDS-163 | 4,14 | 0,00 | N/A |
| LTDS-200 | 5,08 | 0,00 | N/A |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Dimensione | Diametro interno prima del ritiro in mm | Diametro interno dopo il ritiro in mm | Spessore della parete nom. Totale in mm |
| LTDS-046 | 1,17 | 0,00 | N/D |
| LTDS-082 | 2,09 | 0,00 | N/D |
| LTDS-112 | 2,85 | 0,00 | N/D |
| LTDS-163 | 4,14 | 0,00 | N/D |
| LTDS-200 | 5,08 | 0,00 | N/D |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| الحجم | القطر الداخلي قبل الانكماش في مم | القطر الداخلي بعد الانكماش في مم | سمك الجدار اسم. المجموع بمم |
| المحدودة-046 | 1,17 | 0,00 | لا يذكر |
| المحدودة-082 | 2,09 | 0,00 | لا يذكر |
| المحدودة-112 | 2,85 | 0,00 | لا يذكر |
| المحدودة-163 | 4,14 | 0,00 | لا يذكر |
| المحدودة-200 | 5,08 | 0,00 | لا يذكر |
| المحدودة-250 | 6,35 | 3,18 | 1,77 |
| المحدودة-375 | 9,53 | 6,72 | 1,90 |
| المحدودة-413 | 10,49 | 6,35 | 1,50 |
| 크기 | 수축 전 내경 (mm) | 수축 후 내경 (mm)(단위) | 벽 두께 nom. 총 mm |
| 주식회사 -046 | 1,17 | 0,00 | 없음 |
| 주식회사 082 | 2,09 | 0,00 | 없음 |
| 주식회사 -112 | 2,85 | 0,00 | 없음 |
| 주식회사 -163 | 4,14 | 0,00 | 없음 |
| 주식회사 -200 | 5,08 | 0,00 | 없음 |
| 주식회사 -250 | 6,35 | 3,18 | 1,77 |
| 주식회사 -375 | 9,53 | 6,72 | 1,90 |
| 주식회사 -413 | 10,49 | 6,35 | 1,50 |
| サイズ | 収縮前の内径（mm | 収縮後の内径（mm | 公称肉厚合計 mm |
| LTDS-046 | 1,17 | 0,00 | 該当なし |
| LTDS-082 | 2,09 | 0,00 | 該当なし |
| LTDS-112 | 2,85 | 0,00 | 該当なし |
| LTDS-163 | 4,14 | 0,00 | 該当なし |
| LTDS-200 | 5,08 | 0,00 | 該当なし |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| 尺寸 | 收缩前内径（mm） | 收缩后内径（mm） | 壁厚名称。总计（毫米） |
| LTDS-046 | 1,17 | 0,00 | 不适用 |
| LTDS-082 | 2,09 | 0,00 | 不适用 |
| LTDS-112 | 2,85 | 0,00 | 不适用 |
| LTDS-163 | 4,14 | 0,00 | 不适用 |
| LTDS-200 | 5,08 | 0,00 | 不适用 |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Velikost | Vnitřní průměr před smršťováním v mm | Vnitřní průměr po smršťování v mm | Tloušťka stěny nom. Celkový počet v mm |
| Ltd-046 | 1,17 | 0,00 | N/A |
| Ltd-082 | 2,09 | 0,00 | N/A |
| Ltds- 112 | 2,85 | 0,00 | N/A |
| Limited-163 | 4,14 | 0,00 | N/A |
| Ltds- 200 | 5,08 | 0,00 | N/A |
| Ltds- 250 | 6,35 | 3,18 | 1,77 |
| Limited-375 | 9,53 | 6,72 | 1,90 |
| Ltd-413 | 10,49 | 6,35 | 1,50 |
| Tamanho | Diâmetro interior antes da retração em mm | Diâmetro interior após retração em mm | Espessura da parede nom. Total em mm |
| LTDS-046 | 1,17 | 0,00 | N/A |
| LTDS-082 | 2,09 | 0,00 | N/A |
| LTDS-112 | 2,85 | 0,00 | N/A |
| LTDS-163 | 4,14 | 0,00 | N/A |
| LTDS-200 | 5,08 | 0,00 | N/A |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Размер | Внутренний диаметр до усадки в мм | Внутренний диаметр после усадки в мм | Толщина стенки ном. Всего в мм |
| LTDS-046 | 1,17 | 0,00 | Н/Д |
| LTDS-082 | 2,09 | 0,00 | Н/Д |
| LTDS-112 | 2,85 | 0,00 | Н/Д |
| LTDS-163 | 4,14 | 0,00 | Н/Д |
| LTDS-200 | 5,08 | 0,00 | Н/Д |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Boyut | Büzülmeden önce iç çap mm | Büzüldükten sonra iç çap mm | Duvar kalınlığı nomu. Toplam mm |
| Limited-046 | 1,17 | 0,00 | Had yok |
| Limited-082 | 2,09 | 0,00 | Had yok |
| Limited -112 | 2,85 | 0,00 | Had yok |
| Limited -163 | 4,14 | 0,00 | Had yok |
| LTD-200 | 5,08 | 0,00 | Had yok |
| LTD-250 | 6,35 | 3,18 | 1,77 |
| Limited -375 | 9,53 | 6,72 | 1,90 |
| Limited -413 | 10,49 | 6,35 | 1,50 |
| Méret | A belső átmérője szomorítás előtt mm-ben | A belső átmérője szűkülés után mm-ben | Fal vastagsága Nom. Összesen mm-ben |
| LTDS-046 | 1,17 | 0,00 | Nem |
| LTDS-082 | 2,09 | 0,00 | Nem |
| LTDS-112 | 2,85 | 0,00 | Nem |
| LTDS-163 | 4,14 | 0,00 | Nem |
| LTDS-200 | 5,08 | 0,00 | Nem |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS- 375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| اندازه | قطر داخلی قبل از انقباض در میلی متر | قطر داخلی پس از انقباض در میلی متر | ضخامت دیواره نام کل به میلی متر |
| شرکت آموزشی ویبولیتین-046 | 1,17 | 0,00 | نه/A |
| شرکت آموزشی ویبولیتین-082 | 2,09 | 0,00 | نه/A |
| شرکت آموزشی ویبولیتین -112 | 2,85 | 0,00 | نه/A |
| شرکت آموزشی ویبولیتین -163 | 4,14 | 0,00 | نه/A |
| شرکت آموزشی ویبولیتین -200 | 5,08 | 0,00 | نه/A |
| شرکت آموزشی ویبولیتین 250 | 6,35 | 3,18 | 1,77 |
| شرکت آموزشی ویبولیتین -375 | 9,53 | 6,72 | 1,90 |
| شرکت آموزشی ویبولیتین -413 | 10,49 | 6,35 | 1,50 |
| Maat | Binnendiameter vóór krimp in mm | Binnendiameter na krimp in mm | Wanddikte nom. Totaal in mm |
| LTDS-046 | 1,17 | 0,00 | N.V.T. |
| LTDS-082 | 2,09 | 0,00 | N.V.T. |
| LTDS-112 | 2,85 | 0,00 | N.V.T. |
| LTDS-163 | 4,14 | 0,00 | N.V.T. |
| LTDS-200 | 5,08 | 0,00 | N.V.T. |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Dimensiune | Diametrul interior înainte de contracție în mm | Diametrul interior după contracție în mm | Grosimea peretelui nom. Total în mm |
| LTDS-046 | 1,17 | 0,00 | N/A |
| LTDS-082 | 2,09 | 0,00 | N/A |
| LTDS-112 | 2,85 | 0,00 | N/A |
| LTDS-163 | 4,14 | 0,00 | N/A |
| LTDS-200 | 5,08 | 0,00 | N/A |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Koko | Sisähalkaisija ennen kutistumista, mm | Sisähalkaisija kutistumisen jälkeen, mm | Seinämän paksuus nom. Yhteensä mm |
| LTDS-046 | 1,17 | 0,00 | N/A |
| LTDS-082 | 2,09 | 0,00 | N/A |
| LTDS-112 | 2,85 | 0,00 | N/A |
| LTDS-163 | 4,14 | 0,00 | N/A |
| LTDS-200 | 5,08 | 0,00 | N/A |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Veľkosť | Vnútorný priemer pred zmrštením v mm | Vnútorný priemer po zmrštení v mm | Hrúbka steny nom. Celkom v mm |
| LTDS-046 | 1,17 | 0,00 | NEUPLATŇUJE SA |
| LTDS-082 | 2,09 | 0,00 | NEUPLATŇUJE SA |
| LTDS-112 | 2,85 | 0,00 | NEUPLATŇUJE SA |
| LTDS-163 | 4,14 | 0,00 | NEUPLATŇUJE SA |
| LTDS-200 | 5,08 | 0,00 | NEUPLATŇUJE SA |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Størrelse | Indvendig diameter før krympning i mm | Indvendig diameter efter krympning i mm | Vægtykkelse nom. I alt i mm |
| LTDS-046 | 1,17 | 0,00 | N/A |
| LTDS-082 | 2,09 | 0,00 | N/A |
| LTDS-112 | 2,85 | 0,00 | N/A |
| LTDS-163 | 4,14 | 0,00 | N/A |
| LTDS-200 | 5,08 | 0,00 | N/A |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Μέγεθος | Εσωτερική διάμετρος πριν από τη συρρίκνωση σε mm | Εσωτερική διάμετρος μετά τη συρρίκνωση σε mm | Πάχος τοιχώματος nom. Σύνολο σε mm |
| LTDS-046 | 1,17 | 0,00 | N/A |
| LTDS-082 | 2,09 | 0,00 | N/A |
| LTDS-112 | 2,85 | 0,00 | N/A |
| LTDS-163 | 4,14 | 0,00 | N/A |
| LTDS-200 | 5,08 | 0,00 | N/A |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Размер | Вътрешен диаметър преди свиване в mm | Вътрешен диаметър след свиване в mm | Дебелина на стената nom. Общо в мм |
| LTDS-046 | 1,17 | 0,00 | N/A |
| LTDS-082 | 2,09 | 0,00 | N/A |
| LTDS-112 | 2,85 | 0,00 | N/A |
| LTDS-163 | 4,14 | 0,00 | N/A |
| LTDS-200 | 5,08 | 0,00 | N/A |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Storlek | Innerdiameter före krympning i mm | Innerdiameter efter krympning i mm | Väggtjocklek nom. Totalt i mm |
| LTDS-046 | 1,17 | 0,00 | N/A |
| LTDS-082 | 2,09 | 0,00 | N/A |
| LTDS-112 | 2,85 | 0,00 | N/A |
| LTDS-163 | 4,14 | 0,00 | N/A |
| LTDS-200 | 5,08 | 0,00 | N/A |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Velikost | Notranji premer pred krčenjem v mm | Notranji premer po krčenju v mm | Debelina stene nom. Skupaj v mm |
| LTDS-046 | 1,17 | 0,00 | NI RELEVANTNO |
| LTDS-082 | 2,09 | 0,00 | NI RELEVANTNO |
| LTDS-112 | 2,85 | 0,00 | NI RELEVANTNO |
| LTDS-163 | 4,14 | 0,00 | NI RELEVANTNO |
| LTDS-200 | 5,08 | 0,00 | NI RELEVANTNO |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Suurus | Sisediameeter enne kokkutõmbumist, mm | Sisediameeter pärast kokkutõmbumist, mm | Seina paksus nom. Kokku millimeetrites |
| LTDS-046 | 1,17 | 0,00 | EI KOHALDATA |
| LTDS-082 | 2,09 | 0,00 | EI KOHALDATA |
| LTDS-112 | 2,85 | 0,00 | EI KOHALDATA |
| LTDS-163 | 4,14 | 0,00 | EI KOHALDATA |
| LTDS-200 | 5,08 | 0,00 | EI KOHALDATA |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Dydis | Vidinis skersmuo prieš susitraukimą, mm | Vidinis skersmuo po susitraukimo, mm | Sienelės storis nom. Iš viso mm |
| LTDS-046 | 1,17 | 0,00 | NETAIKOMA |
| LTDS-082 | 2,09 | 0,00 | NETAIKOMA |
| LTDS-112 | 2,85 | 0,00 | NETAIKOMA |
| LTDS-163 | 4,14 | 0,00 | NETAIKOMA |
| LTDS-200 | 5,08 | 0,00 | NETAIKOMA |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Izmērs | Iekšējais diametrs pirms saraušanās, mm | Iekšējais diametrs pēc saraušanās mm | Sienas biezums nom. Kopā mm |
| LTDS-046 | 1,17 | 0,00 | NAV PIEMĒROJAMS |
| LTDS-082 | 2,09 | 0,00 | NAV PIEMĒROJAMS |
| LTDS-112 | 2,85 | 0,00 | NAV PIEMĒROJAMS |
| LTDS-163 | 4,14 | 0,00 | NAV PIEMĒROJAMS |
| LTDS-200 | 5,08 | 0,00 | NAV PIEMĒROJAMS |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Grösse | Innendurchmesser vor Schrumpfung in mm | Innendurchmesser nach Schrumpfung in mm | Wandstärke nom. Total in mm |
| LTDS-046 | 1,17 | 0,00 | N/A |
| LTDS-082 | 2,09 | 0,00 | N/A |
| LTDS-112 | 2,85 | 0,00 | N/A |
| LTDS-163 | 4,14 | 0,00 | N/A |
| LTDS-200 | 5,08 | 0,00 | N/A |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
| Grösse | Innendurchmesser vor Schrumpfung in mm | Innendurchmesser nach Schrumpfung in mm | Wandstärke nom. Total in mm |
| LTDS-046 | 1,17 | 0,00 | N/A |
| LTDS-082 | 2,09 | 0,00 | N/A |
| LTDS-112 | 2,85 | 0,00 | N/A |
| LTDS-163 | 4,14 | 0,00 | N/A |
| LTDS-200 | 5,08 | 0,00 | N/A |
| LTDS-250 | 6,35 | 3,18 | 1,77 |
| LTDS-375 | 9,53 | 6,72 | 1,90 |
| LTDS-413 | 10,49 | 6,35 | 1,50 |
FEP/EFEP double wall shrink tubing - Technical data sheet for download
For detailed information on our FEP/EFEP double wall heat shrink tubing, we offer you a comprehensive technical data sheet for download. This data sheet contains all the important technical specifications, including material composition, temperature resistance and electrical insulation properties. You will also find detailed information on the dimensions and availability of our products.
Download: Technical data sheet
The double-wall FEP/EFEP shrink tubing works like a shrink tubing with an inner hot-melt adhesive. When a shrink temperature of approx. 200 °C is reached, the inner EFEP layer of the double-wall shrink tubing liquefies and seals the shrinkable material permanently and tightly.
Are you looking for a reliable dealer for FEP/EFEP double-wall shrink tubing? Then you've come to the right place! We are your expert partner for FEP double-wall heat shrink tubing for electrical insulation and EFEP double-wall heat shrink tubing for cable protection. Our heat-shrink tubing offers you high quality and a wide range of applications.
Our FEP/EFEP double-wall heat-shrink tubing is specially developed for industrial use. They not only offer excellent insulation properties, but are also extremely resistant to high temperatures and chemicals. The heat-resistant FEP double-wall shrink tubing is perfect for applications where high temperatures play a role. In addition, the chemical-resistant EFEP double-wall heat shrink tubing is ideal for environments where aggressive chemicals are used.
When it comes to protecting your cables, our EFEP heat shrink tubing, double-walled for cable protection, is the right choice. They offer a reliable and durable solution for a wide range of applications. Whether in industry or in the home, our heat shrink tubing meets the highest standards and offers you the safety you need.
As your distributor for FEP/EFEP double wall heat shrink tubing, we place great importance on customer satisfaction. Our range includes a wide range of products to meet your specific requirements. You can be sure that you will only receive the best products from us.
Take advantage of our FEP double-wall heat-shrink tubing for electrical insulation and discover the variety of our EFEP heat-shrink tubing, double-wall for industrial use. Our heat shrink tubing is easy to use and offers you the optimum solution for your projects.
Contact us today to find out more about our high-quality FEP/EFEP double-wall heat shrink tubing. We are here to help you find the best products for your needs. Put your trust in our experience and let our product quality convince you.
To summarize: As a distributor of FEP/EFEP double-wall heat shrink tubing, we offer you products that are heat-resistant, chemical-resistant and ideal for electrical insulation and cable protection. We look forward to helping you!
Are you looking for a reliable dealer for FEP/EFEP double-wall shrink tubing? Then you've come to the right place! We are your expert partner for FEP double-wall heat shrink tubing for electrical insulation and EFEP double-wall heat shrink tubing for cable protection. Our heat-shrink tubing offers you high quality and a wide range of applications.
Our FEP/EFEP double-wall heat-shrink tubing is specially developed for industrial use. They not only offer excellent insulation properties, but are also extremely resistant to high temperatures and chemicals. The heat-resistant FEP double-wall shrink tubing is perfect for applications where high temperatures play a role. In addition, the chemical-resistant EFEP double-wall heat shrink tubing is ideal for environments where aggressive chemicals are used.
When it comes to protecting your cables, our EFEP heat shrink tubing, double-walled for cable protection, is the right choice. They offer a reliable and durable solution for a wide range of applications. Whether in industry or in the home, our heat shrink tubing meets the highest standards and offers you the safety you need.
As your distributor for FEP/EFEP double wall heat shrink tubing, we place great importance on customer satisfaction. Our range includes a wide range of products to meet your specific requirements. You can be sure that you will only receive the best products from us.
Take advantage of our FEP double-wall heat-shrink tubing for electrical insulation and discover the variety of our EFEP heat-shrink tubing, double-wall for industrial use. Our heat shrink tubing is easy to use and offers you the optimum solution for your projects.
Contact us today to find out more about our high-quality FEP/EFEP double-wall heat shrink tubing. We are here to help you find the best products for your needs. Put your trust in our experience and let our product quality convince you.
To summarize: As a distributor of FEP/EFEP double-wall heat shrink tubing, we offer you products that are heat-resistant, chemical-resistant and ideal for electrical insulation and cable protection. We look forward to helping you!
Do you have any questions about our offer?
FEP/EFEP double-wall shrink tubing
FEP double-wall shrink tubing for electrical insulation
In our range you will find a variety of sizes, colors and materials that meet all industry-standard specifications and are suitable for precise applications. Each product in our range has been carefully selected to ensure the highest quality and performance.
Below you will find detailed tables with sizes and technical data for each of our hoses. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right hose for your specific requirements.
Below you will find detailed tables with sizes and technical data for each of our hoses. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right hose for your specific requirements.
What can we do for you?
Contact our product experts
What can we do for you?
Contact our product experts
Oliver Bürli
Head of Hose Technology, Sales and Product Management
Do you have any questions about:
FEP/EFEP double-wall shrink tubing
Just send us a short message and we will be happy to answer your questions by phone or e-mail.
Questions?
Write to us!
Would you like to find out more about our high-quality products?
We have a large warehouse, short delivery times and duty-free delivery!
Do not hesitate to contact us, we will be happy toadvise you personally.
Do not hesitate to contact us, we will be happy toadvise you personally.
Your contact persons
Request a callback
Would you like a personal telephone consultation?
Simply fill out the form and we will get back to you.
What are the advantages of using DC voltage transformers compared to AC voltage transformers?
Please fill out the form below to download the data sheet for this product.
What are the advantages of using DC voltage transformers compared to AC voltage transformers?
You can now click and download the PDF documents as usual.
X
Get in touch with us
Our hoses at a glance
Because the part makes the price. Just enter your email and we will send you our catalog free of charge.
Request catalog
Frequently asked questions about FEP/EFEP double-wall shrink tubing
1. what is FEP/EFEP double-wall shrink tubing?
FEP/EFEP double wall heat shrink tubing is a special tubing used for electrical insulation and protection of cables and wires. It consists of two wall layers and shrinks when exposed to heat to form a tight and protective sheath.
ETW 803 double-walled from 3M is a very popular double-walled heat shrink tubing.
ETW 803 double-walled from 3M is a very popular double-walled heat shrink tubing.
2. for which applications is FEP double-wall shrink tubing suitable?
- Electrical insulation
- Protection against mechanical stress
- Application in high-temperature areas
- Use in the electronics industry
3. what are the advantages of an EFEP shrink sleeve, double-walled, for industrial use?
- High chemical resistance
- Excellent electrical insulation properties
- High heat resistance
- Long service life and reliability
4. how is an FEP/EFEP double-wall shrink sleeve installed?
The shrink tubing is pushed over the object to be protected. The tubing is heated with a heat gun or other heat source. The heat causes the tubing to shrink and fit snugly around the object, creating secure and tight insulation.
5. what sizes and lengths are available for FEP/EFEP double wall heat shrink tubing?
FEP/EFEP double wall heat shrink tubing is available in various sizes and lengths to suit different applications. You can select the right size and length for your specific requirements.
