Rotima-Logo
  • About us
  • Areas of application
  • Team
  • Jobs
  • Contact us
  • Downloads
  • Electronic components
    • Bourns products
      • Ceramic PTC Heaters Bourns®
      • Open LED Shunt (LSP) Bourns®
      • Switches Bourns®
      • Modular Contacts Bourns®
      • Bourns® inductors
      • Custom Magnetics Bourns®
      • Precision Sensors Bourns®
      • Commercial Panel Controls & Encoders Bourns®
      • Industrial Panel Controls Bourns®
      • Pro Audio Products Bourns®
      • Industrie Encoder Bourns®
      • Stock of Bourns® products
      • Circuit protection
        • TBU® High-Speed Protectors Bourns®
        • Mini Breakers Bourns®
        • SinglFuse™ SMD Fuses Bourns®
        • Multifuse® Polymer PTC Resettable Fuses Bourns®
        • Multifuse® Polymer PTC freeXpansion™ Products Bourns®
        • Ceramic PTC Products Bourns®
        • Chipguard® ESD Suppressors Bourns®
        • Gas Discharge Tubes Bourns®
        • GMOV™ Hybrid Overvoltage Protection Components Bourns®
        • TCS™ High-Speed Protectors Bourns®
      • Turns-Counting Dials Bourns®
    • EMC filter
    • Diodes
      • Diodes Bourns®
      • Diode Arrays Bourns®
      • Power TVS Diodes Bourns®
    • Capacitors
      • Electrolytic capacitors
        • Screw terminal electrolytic capacitors
        • Snap-in electrolytic capacitors
        • SMT electrolytic capacitors
        • Radial electrolytic capacitors
        • Polymer electrolytic capacitors
      • Film capacitors
        • High-pulse capacitors
        • Spark killer
        • Interference suppression capacitors
        • Film capacitors from AIC-Europe
      • Ceramic capacitors (MLCC)
      • Tantalum capacitors
        • Radial tantalum capacitors
        • SMT tantalum capacitors
        • Hybrid tantalum capacitors
    • Transducer
      • DC/DC converter
      • Voltage transformer
      • Current transformer
    • Interference suppression filter
      • Radio interference suppression filter
      • Mains interference suppression filter
    • Varistors
      • Multilayer Varistors (MLV) Bourns®
      • Metal Oxide Varistors (MOV) Bourns®
    • Thyristors
      • TISP® Thyristor Surge Protectors Bourns®
    • Potentiometer
      • Commercial Slide Potentiometers Bourns®
      • Precision Controls Bourns®
      • Linear Motion Potentiometers Bourns®
      • Trimpot® Trimming Potentiometers Bourns®
    • Piezo elements
    • Resistors
      • Resistor Networks Bourns®
      • Current Sense Resistors Bourns®
      • Power Resistors Bourns®
      • Current Sense / Shunts
        • On-Board
        • Off-Board
      • Chip resistors
    • Inductances
      • Power Inductors
      • Coil Inductors
      • Chip Inductors
      • Transformer & transformer
  • Customized inductances
    • Transformers
      • Small transformers
      • Autotransformers
      • Isolating transformers
      • Safety transformers
      • Toroidal transformers
      • UI transformers
      • M transformers
      • EI transformers
      • Planar transformers
    • Throttles
      • Toroidal chokes
      • Storage chokes
    • Coils
      • Air coils
      • Coilformers
      • Baking varnish coils
    • Winding technique
  • Electronics Production equipment
    • Metal mesh
      • Earthing straps
      • Hose braids
      • Flat braid
      • Round mesh
      • Flexible earth connectors / earthing straps
      • Power Connections
      • EMC and shielding solutions
      • High-performance and special solutions
    • Plugs / plug connections
      • Quick connectors
      • Industrial connectors
    • Strands
      • High frequency strands
      • Fine wires
    • Ferrites
      • Ferrite cores
    • Electrical insulating tapes
      • Glass fabric tape 3M - Types 27-69-79
      • Polyester laminate 3M - Types 44-44DA-44TA-44HT-55
      • Acetate fabric tape 3M - types 11 - 28
      • Epoxy film 3M - Types 1 - Super 10 - Super 20
      • Glass fiber reinforced polyester films 3M - Types 46 - 1039 - 1046 - 1076 - 1139 -1339
      • Electrical insulating tape paper 3M - types 12 - 16
      • Electrical insulating tape polyimide film 3M - Types 92 - 98C-1 - 1205 - 1218
      • Electrical insulating tape PTFE film 3M - types 60 - 61 - 62
      • Electrical insulating tape PVC film 3M - Scotch 22 - Super 33+ - Super 35 - Super 88
      • Electrical insulating tape 3M polyester films
      • Electrically conductive fabric tapes
      • EMC shielding foil made of aluminum
      • EMC shielding foils made of copper
    • Temperature switch
    • Potting compound
    • Impeder cores
    • Nanocrystalline materials
    • Amorphous materials
  • Hose technology
    • Shrink tubing
      • EPDM cold-shrink tubing
      • Shrink tubing, thin-walled
      • Shrink tubing thin-walled crystal clear fluoropolymer RT-375
      • Shrink tubing cut to the desired special size
      • Thick-walled shrink tubing with internal adhesive
      • Shrink tubing thin-walled transparent with inner adhesive
      • Medium-wall shrink tubing with and without internal adhesive
      • Heat-shrinkable shrink molded parts
      • Shrink end cap
      • Thin-walled shrink tubing with internal adhesive
      • Shrink tubing thin-walled inexpensive
      • Heat-shrink tubing, halogen-free, thin-walled
      • Shrink tubing 3:1 thin-walled
      • Shrink tubing thin-walled yellow/green
      • Shrink tubing thin-walled fluoroelastomer VITON-E
      • Heat-shrink tubing super-thin rigid PVC Kopalon for battery packs
      • Shrink tubing thin-walled PVDF Kynar
    • Silicone hoses
      • Silicone hose industry
      • Silicone tube Pharma
      • MedTech silicone tubing
      • Silicone round cord and monofilament
      • Silicone fabric hose - pressure hose
      • Silicone shrink tubing
    • Protective hoses
      • Braided hose
      • Fabric shrink tubing
      • Insulating hose made of polyamide 12
      • PA 12 Hose
    • Fluoroplastic hose
      • FEP hose
      • FEP heat shrink tubing 2:1
      • FEP shrink tubing 1.3:1 and 1.6:1
      • FEP heat shrink tubing 110°C
      • FEP roller coating with shrinkage
      • FEP/EFEP double-wall shrink tubing
      • PFA hose
      • PTFE hose
      • PTFE heat shrink tubing 2:1
      • PTFE shrink tubing 4:1
      • PTFE heat-shrink tubing Sub-Lite-Wall
      • PTFE-FEP double-wall shrink tubing
    • Special hoses
      • Special hoses PEEK
      • Polyimide hose
      • PEEK shrink tubing
    • Further hose technology
      • PTFE shrink tubing
      • Chemical hoses
      • Industrial hoses
      • Food hoses
  • Active components
    • All-IN-ONE AC-DC converter
    • Primary Side Regulation AC-DC Power Converter
    • Secondary Side Regulation AC-DC Power Converter
    • Non-Isolated AC-DC Power Converter
    • Synchronous Rectifier Controller
    • GaN AC-DC Power Converter
    • Synchronous rectifier
Added value distributor and development

Silicone fabric hose - Pressure hose dealer

  • Large selection of silicone fabric hose - pressure hose
  • For electrical engineering and electronics business
  • A direct line instead of a waiting loop - we are there for you
Direct inquiry
Request a callback
High-pressure silicone fabric hose for industrial applications from ROTIMA
Over 60 years of experience
in the electrical engineering and electronics industry
Short delivery times
through optimized warehousing
Germany and Switzerland
Dual location strength and reliability

Silicone fabric hose in our range:

In our hose technology range you will find a variety of sizes, colors and materials that meet all industry-standard specifications and are suitable for precise applications. Each product in our range has been carefully selected to ensure the highest quality and performance.

Below you will find detailed sizing and technical data tables for each of our hoses. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right hose for your specific requirements.

Silicone fabric hose - Size chart

Silicone fabric hose - Technical data

MaterialSilikongewebeschlauch, monofil umflochten
Härte70 +/-5 Shore A
ToleranzenInnen: ISO DIN 3302.1 E2Aussen: ISO DIN 3302.1 E3
Temperaturbereich-60°C bis +180°C
Farbeinnen transluzent, aussen rot beschichtet
AnwendungenGerätebau, Maschinenbau, Hydraulik, Chemie, Elektronik, Elektrotechnik
MaterialSilicone fabric hose, monofilament braided
Hardness70 +/-5 Shore A
TolerancesInterior: ISO DIN 3302.1 E2Exterior: ISO DIN 3302.1 E3
Temperature range-60°C to +180°C
Colortranslucent inside, coated red on the outside
ApplicationsEquipment manufacturing, mechanical engineering, hydraulics, chemistry, electronics, electrical engineering
MaterialManguera de tejido de silicona, monofilamento trenzado
Dureza70 +/-5 Shore A
ToleranciasInterior: ISO DIN 3302.1 E2Exterior: ISO DIN 3302.1 E3
Temperatura-60°C a +180°C
Colortranslúcido por dentro, recubierto de rojo por fuera
AplicacionesFabricación de equipos, ingeniería mecánica, hidráulica, química, electrónica, ingeniería eléctrica
MateriałWąż z tkaniny silikonowej, oplot monofilamentowy
Twardość70 +/-5 Shore A
TolerancjeWnętrze: ISO DIN 3302.1 E2Wewnętrzne: ISO DIN 3302.1 E3
Zakres temperatur-60°C do +180°C
Kolorpółprzezroczysty wewnątrz, pokryty czerwoną powłoką na zewnątrz
ZastosowaniaProdukcja sprzętu, inżynieria mechaniczna, hydraulika, chemia, elektronika, elektrotechnika
MatériauTuyau en tissu de silicone, tressé en monofilament
Dureté70 +/-5 Shore A
TolérancesÀ l'intérieur : ISO DIN 3302.1 E2Extérieur : ISO DIN 3302.1 E3
Plage de température-60°C à +180°C
Couleurtranslucide à l'intérieur, revêtement rouge à l'extérieur
ApplicationsConstruction d'appareils, construction mécanique, hydraulique, chimie, électronique, électrotechnique
MaterialeTubo in tessuto siliconico, monofilamento intrecciato
Durezza70 +/-5 Shore A
TolleranzeInterno: ISO DIN 3302.1 E2Esterno: ISO DIN 3302.1 E3
Intervallo di temperaturaDa -60°C a +180°C
Coloretraslucido all'interno, rivestito di rosso all'esterno
ApplicazioniFabbricazione di apparecchiature, ingegneria meccanica, idraulica, chimica, elettronica, elettrotecnica
الموادخرطوم نسيج السيليكون، حيدة المنسوجة
صلابة70 +/-5 Shore A
التسامحالجزء الداخلي : ISO DIN 3302.1e2 الجزء الخارجي : ISO DIN 3302.1E3
نطاق درجة الحرارة- من 60 درجة مئوية إلى +180 درجة مئوية
اللونشفاف من الداخل والأحمر من الخارج
التطبيقتصنيع المعدات، الهندسة الميكانيكية، الهيدروليكية، الكيمياء، الإلكترونيات، الهندسة الكهربائية
재료실리콘 직물 호스, 단사 편직
경도70 +/-5 Shore A
공차내장: ISO DIN 3302.1e2 외장: ISO DIN 3302.1E3
온도 범위-60°C ~ +180°C
색내부는 반투명, 외부는 붉은색으로 칠해져 있다
적용장비 제조, 기계 공학, 수리학, 화학, 전자, 전기 공학
素材シリコンファブリックホース、モノフィラメント編組
硬度70 +/-5 Shore A
公差内装ISO DIN 3302.1 E2外装:ISO DIN 3302.1 E3
温度範囲-60°C ~ +180°C
カラー内側は半透明、外側は赤くコーティングされている。
アプリケーション機器製造、機械工学、水力学、化学、電子工学、電気工学
材料硅树脂织物软管,单丝编织
硬度70 +/-5 Shore A
公差内饰:ISO DIN 3302.1 e2外饰:ISO DIN 3302.1 E3
温度范围-60°C至+180°C
颜色内部半透明,外部涂有红色
应用装备制造,机械工程,水力学,化学,电子,电气工程
MateriálHadice z silikonové tkaniny, monofilní tkaní
Tvrdost70 +/-5 Shore A
ToleranceInteriér: ISO DIN 3302.1 e2 Exteriér: ISO DIN 3302.1E3
Teplotní rozsah-60°C až +180°C
BarvaInteriér průsvitný, namalovaný červeně
AplikaceVýroba zařízení, strojírenství, hydraulika, chemie, elektronika, elektrotechnika
MaterialMangueira de tecido de silicone, entrançado de monofilamento
Dureza70 +/-5 Shore A
TolerânciasInterior: ISO DIN 3302.1 E2Exterior: ISO DIN 3302.1 E3
Gama de temperaturas-60°C a +180°C
Cortranslúcido no interior, revestido de vermelho no exterior
AplicaçõesFabrico de equipamentos, engenharia mecânica, hidráulica, química, eletrónica, engenharia eléctrica
МатериалШланг из силиконовой ткани, с моноволоконной оплеткой
Твердость70 +/-5 Shore A
ДопускиВнутренняя часть: ISO DIN 3302.1 E2Внешний вид: ISO DIN 3302.1 E3
Диапазон температурот -60°C до +180°C
ЦветПолупрозрачный внутри, снаружи покрыт красным напылением
ПриложенияПроизводство оборудования, машиностроение, гидравлика, химия, электроника, электротехника
MalzemeMonofilament örgülü silikon kumaş hortum
Sertlik70 +/-5 Shore A
ToleransISO DIN 3302.1e2 Dış ISO DIN 3302.1E3
Sıcaklık aralığı-60°C-+180°C
Renkİç yarı saydam ve dış kıpkırmızı boyalı
UygulamaEkipman İmalatı, Makine Mühendisliği, Hidrolik, Kimya, Elektronik, Elektrik Mühendisliği
AnyagokSzilikon szövet tömlő, monofil szőtt
Keménység70 +/-5 Shore A
ToleranciaBelső: ISO DIN 3302.1 e2 Külső: ISO DIN 3302.1 E3
Hőmérséklet tartomány-60 ° C-+ 180 ° C
SzínA belső áttetsző, a külső vörös
AlkalmazásBerendezésgyártás, gépészet, hidraulika, kémia, elektronika, elektrotechnika
موادشیلنگ پارچه سیلیکونی ، بافته شده با مونوفیلمنت
سختی70 +/-5 Shore A
تحملفضای داخلی: ISO DIN 3302.1e2 خارجی: ISO DIN 3302.1E3
دامنه دما60 درجه سانتیگراد تا 180 درجه سانتیگراد
رنگدر داخل شفاف است و در قسمت بیرونی قرمز رنگ شده است
برنامهساخت تجهیزات ، مهندسی مکانیک ، هیدرولیک ، شیمی ، الکترونیک ، مهندسی برق
MateriaalSiliconenweefselslang, monofilament gevlochten
Hardheid70 +/-5 Shore A
TolerantiesInterieur: ISO DIN 3302.1 E2Buitenkant: ISO DIN 3302.1 E3
Temperatuurbereik-60°C tot +180°C
Kleurdoorschijnende binnenkant, rode coating aan de buitenkant
ToepassingenProductie van apparatuur, werktuigbouwkunde, hydraulica, chemie, elektronica, elektrotechniek
MaterialFurtun din silicon, monofilament împletit
Duritate70 +/-5 Shore A
ToleranțeInterior: ISO DIN 3302.1 E2Exterior: ISO DIN 3302.1 E3
Gama de temperaturiDe la -60°C la +180°C
Culoaretranslucidă în interior, acoperită cu roșu la exterior
AplicațiiFabricarea echipamentelor, inginerie mecanică, hidraulică, chimie, electronică, inginerie electrică
MateriaaliSilikonikangasletku, monofilamenttilankainen punottu
Kovuus70 +/-5 Shore A
ToleranssitSisätilat: Ulkopuoli: ISO DIN 3302.1 E2: E3
Lämpötila-alue-60°C - +180°C
Värisisältä läpikuultava, ulkopuolelta punaiseksi pinnoitettu.
SovelluksetLaitevalmistus, konetekniikka, hydrauliikka, kemia, elektroniikka, sähkötekniikka.
MateriálSilikónová textilná hadica, opletená z monofilu
Tvrdosť70 +/-5 Shore A
TolerancieInteriér: DIN 3302.1 E2Vonkajší priestor: ISO DIN 3302.1 E3
Rozsah teplôt-60°C až +180°C
Farbapriesvitný vo vnútri, zvonka potiahnutý červenou farbou
AplikácieVýroba zariadení, strojárstvo, hydraulika, chémia, elektronika, elektrotechnika
MaterialeSilikone stofslange, monofilament flettet
Hårdhed70 +/-5 Shore A
TolerancerIndvendig: ISO DIN 3302.1 E2Udvendigt: ISO DIN 3302.1 E3
Temperaturområde-60 °C til +180 °C
Farvegennemsigtig indeni, belagt med rødt på ydersiden
AnvendelserFremstilling af udstyr, maskinteknik, hydraulik, kemi, elektronik, elektroteknik
ΥλικόΥφασμάτινος σωλήνας σιλικόνης, μονοκλωστός πλεγμένος
Σκληρότητα70 +/-5 Shore A
ΑνοχέςΕσωτερικό: E2Εξωτερικά: ISO DIN 3302.1 E2: E3
Εύρος θερμοκρασίας-60°C έως +180°C
Χρώμαημιδιαφανές στο εσωτερικό, με κόκκινη επίστρωση στο εξωτερικό
ΕφαρμογέςΚατασκευή εξοπλισμού, μηχανολογία, υδραυλική, χημεία, ηλεκτρονική, ηλεκτρολογία
МатериалМаркуч от силиконова тъкан, плетен от монофиламент
Твърдост70 +/-5 Shore A
Допустими отклоненияИнтериор: ISO DIN 3302.1 E2Външен: ISO DIN 3302.1 E3
Температурен диапазон-60°C до +180°C
Цвятполупрозрачен отвътре, с червено покритие отвън
ПриложенияПроизводство на оборудване, машиностроене, хидравлика, химия, електроника, електротехника
MaterialSlang av silikonväv, monofilament flätad
Hårdhet70 +/-5 Shore A
ToleranserInvändigt: ISO DIN 3302.1 E2Utvändigt: ISO DIN 3302.1 E3
Temperaturområde-60°C till +180°C
Färggenomskinlig på insidan, rödfärgad på utsidan
TillämpningarTillverkning av utrustning, maskinteknik, hydraulik, kemi, elektronik, elektroteknik
MaterialCev iz silikonske tkanine, pletena iz monofilamenta
Trdota70 +/-5 Shore A
ToleranceNotranjost: DIN 3302.1 E2Zunanjost: ISO DIN 3302.1 E3
Temperaturno območje-60 °C do +180 °C
Barvav notranjosti prosojen, na zunanji strani prevlečen z rdečo barvo
AplikacijeProizvodnja opreme, strojništvo, hidravlika, kemija, elektronika, elektrotehnika
MaterjalSilikoonkangast voolik, monokiudne punutud
Kõvadus70 +/-5 Shore A
TolerantsidSisustus: ISO DIN 3302.1 E2 Väljaspool: E3
Temperatuurivahemik-60°C kuni +180°C
Värvseestpoolt läbipaistev, väljastpoolt kaetud punasega
RakendusedSeadmete tootmine, masinaehitus, hüdraulika, keemia, elektroonika, elektrotehnika
MedžiagaSilikono audinio žarna, pinta iš vienagijų siūlų
Kietumas70 +/-5 Shore A
Leistini nuokrypiaiInterjeras: ISO DIN 3302.1 E2Išorė: ISO DIN 3302.1 E3
Temperatūros diapazonasnuo -60 °C iki +180 °C
Spalvapermatomas vidus, išorė padengta raudona spalva.
ParaiškosĮrangos gamyba, mechanikos inžinerija, hidraulika, chemija, elektronika, elektrotechnika
MateriālsSilikona auduma šļūtene, pīta no monopavediena
Cietība70 +/-5 Shore A
PielaidesInterjers: ISO DIN 3302.1 E2Iekšējā apdare: ISO DIN 3302.1 E3
Temperatūras diapazons-60°C līdz +180°C
Krāsacaurspīdīgs iekšpusē, no ārpuses pārklāts ar sarkanu pārklājumu.
PieteikumiIekārtu ražošana, mašīnbūve, hidraulika, ķīmija, elektronika, elektrotehnika.
MaterialSilikongewebeschlauch, monofil umflochten
Härte70 +/-5 Shore A
ToleranzenInnen: ISO DIN 3302.1 E2Aussen: ISO DIN 3302.1 E3
Temperaturbereich-60°C bis +180°C
Farbeinnen transluzent, aussen rot beschichtet
AnwendungenGerätebau, Maschinenbau, Hydraulik, Chemie, Elektronik, Elektrotechnik
MaterialSilikongewebeschlauch, monofil umflochten
Härte70 +/-5 Shore A
ToleranzenInnen: ISO DIN 3302.1 E2Aussen: ISO DIN 3302.1 E3
Temperaturbereich-60°C bis +180°C
Farbeinnen transluzent, aussen rot beschichtet
AnwendungenGerätebau, Maschinenbau, Hydraulik, Chemie, Elektronik, Elektrotechnik

Silicone fabric hose - More information

ParameterWertEinheitNorm
ElastomerbasisSilikongewebeschlauch
GeometrieSchlauch
Dichte1,16   +/- 0.05g/cm3DIN 53479 A
Härte70   +/- 5Shore ADIN 53505
Reissfestigkeit11,3%DIN 53504 S1
Reissdehnung500%DIN 53504 S1
Weiterreisswiderstand25N/mmASTM D 624 B
Rückprallelastizität53%DIN 53512
Druckverformungsrest35 %  bei 175 °C; 22 h%DIN 53517
Temperaturbeständigkeit– 60 bis + 180°C
FarbeInnen transparent; aussen rot beschichtet
ParametersValueUnitStandard
Elastomer baseSilicone fabric hose
GeometryHose
Density1,16   +/- 0.05g/cm3DIN 53479 A
Hardness70   +/- 5Shore ADIN 53505
Tear resistance11,3%DIN 53504 S1
Tear elongation500%DIN 53504 S1
Tear resistance25N/mmASTM D 624 B
Rebound resilience53%DIN 53512
Compression set35 % at 175 °C; 22 h%DIN 53517
Temperature resistance- 60 to + 180°C
ColorTransparent inside; coated red on the outside
ParámetrosValorUnidadEstándar
Base de elastómeroManguera de tejido de silicona
GeometríaManguera
Densidad1,16   +/- 0.05g/cm3DIN 53479 A
Dureza70   +/- 5Shore ADIN 53505
Resistencia al desgarro11,3%DIN 53504 S1
Alargamiento de la lágrima500%DIN 53504 S1
Resistencia al desgarro25N/mmASTM D 624 B
Resistencia al rebote53%DIN 53512
Conjunto de compresión35 % a 175 °C; 22 h%DIN 53517
Resistencia a la temperatura- 60 a + 180°C
ColorTransparente por dentro; recubierto de rojo por fuera
ParametryWartośćJednostkaStandard
Podstawa z elastomeruWąż z tkaniny silikonowej
GeometriaWąż
Gęstość1,16   +/- 0.05g/cm3DIN 53479 A
Twardość70   +/- 5Shore ADIN 53505
Odporność na rozdarcie11,3%DIN 53504 S1
Wydłużenie łez500%DIN 53504 S1
Odporność na rozdarcie25N/mmASTM D 624 B
Odporność na odbicie53%DIN 53512
Zestaw kompresji35% w 175 °C; 22 h%DIN 53517
Odporność na temperaturę- 60 do + 180°C
KolorPrzezroczysty wewnątrz; powlekany na czerwono na zewnątrz
ParamètresValeurUnitéNorme
Base élastomèreTuyau en tissu de silicone
GéométrieTuyau
Densité1,16   +/- 0.05g/cm3DIN 53479 A
Dureté70   +/- 5Shore ADIN 53505
Résistance à la déchirure11,3%DIN 53504 S1
Allongement à la rupture500%DIN 53504 S1
Résistance à la déchirure25N/mmASTM D 624 B
Résistance au rebond53%DIN 53512
Déformation résiduelle à la compression35 % à 175 °C ; 22 h%DIN 53517
Résistance à la température- 60 à + 180°C
Couleurintérieur transparent ; extérieur à revêtement rouge
ParametriValoreUnitàStandard
Base in elastomeroTubo in tessuto siliconico
GeometriaTubo flessibile
Densità1,16   +/- 0.05g/cm3DIN 53479 A
Durezza70   +/- 5Shore ADIN 53505
Resistenza allo strappo11,3%DIN 53504 S1
Allungamento dello strappo500%DIN 53504 S1
Resistenza allo strappo25N/mmASTM D 624 B
Resilienza al rimbalzo53%DIN 53512
Set di compressione35 % a 175 °C; 22 h%DIN 53517
Resistenza alla temperatura- 60 a + 180°C
ColoreTrasparente all'interno; rivestito di rosso all'esterno
البارامتراتالقيمةالوحدةالمعايير
مصفوفة المطاط الصناعيخرطوم نسيج السيليكون
الهندسةخرطوم
الكثافة1,16   +/- 0.05g/cm3DIN 53479 A
صلابة70   +/- 5Shore ADIN 53505
مقاومة المسيل للدموع11,3%DIN 53504 S1
استطالة المسيل للدموع500%DIN 53504 S1
مقاومة المسيل للدموع25N/mmASTM D 624 B
مرونة مرنة53%DIN 53512
ضغط النزوح35 في المائة عند درجة حرارة 175 مئوية؛ 22 ساعة%DIN 53517
مقاومة درجات الحرارة-60 إلى +180°C
اللونالشفافية الداخلية؛ الخارج مطلية باللون الأحمر
매개 변수가치단위표준
탄성체 기체실리콘 패브릭 호스
기하학호스
밀도1,16   +/- 0.05g/cm3DIN 53479 A
경도70   +/- 5Shore ADIN 53505
파열 저항성11,3%DIN 53504 S1
찢기 신장 비율500%DIN 53504 S1
파열 저항성25N/mmASTM D 624 B
리턴 탄성53%DIN 53512
압축 비트 변경175 °C에서 35%; 22시간%DIN 53517
내온성-60 ~ +180°C
색내부 투명성 외부는 빨간색으로 칠해져 있다
パラメータ価値単位スタンダード
エラストマー・ベースシリコンファブリックホース
幾何学ホース
密度1,16   +/- 0.05g/cm3DIN 53479 A
硬度70   +/- 5Shore ADIN 53505
耐引裂性11,3%DIN 53504 S1
涙の伸長500%DIN 53504 S1
耐引裂性25N/mmASTM D 624 B
反発力53%DIN 53512
圧縮セット35 % at 175 °C; 22 h%DIN 53517
温度抵抗- 60 から + 180°C
カラー内側は透明、外側は赤色コーティング
参数价值单位标准
弹性体基体硅树脂织物软管
几何学软管
密度1,16   +/- 0.05g/cm3DIN 53479 A
硬度70   +/- 5Shore ADIN 53505
抗撕裂性11,3%DIN 53504 S1
撕裂伸长率500%DIN 53504 S1
抗撕裂性25N/mmASTM D 624 B
回弹弹性53%DIN 53512
压缩变位175°C时为35%;22小时%DIN 53517
耐温性-60至+180°C
颜色内部透明;外部涂有红色
ParametryHodnotaJednotkyStandard
Elastomerní matriceHadice z silikonové tkaniny
GeometrieHadice
Hustota1,16   +/- 0.05g/cm3DIN 53479 A
Tvrdost70   +/- 5Shore ADIN 53505
Odolnost proti roztržení11,3%DIN 53504 S1
Prodloužení při roztržení500%DIN 53504 S1
Odolnost proti roztržení25N/mmASTM D 624 B
Elasticita odrazu53%DIN 53512
Komprimované posunutí35% při 175 °C; 22 hodin%DIN 53517
Teplotní odolnost-60 až +180°C
BarvaVnitřní transparentnost; Vnější nátěr s červenou barvou
ParâmetrosValorUnidadePadrão
Base de elastómeroMangueira de tecido de silicone
GeometriaMangueira
Densidade1,16   +/- 0.05g/cm3DIN 53479 A
Dureza70   +/- 5Shore ADIN 53505
Resistência ao rasgamento11,3%DIN 53504 S1
Alongamento da lágrima500%DIN 53504 S1
Resistência ao rasgamento25N/mmASTM D 624 B
Resiliência de recuperação53%DIN 53512
Conjunto de compressão35 % a 175 °C; 22 h%DIN 53517
Resistência à temperatura- 60 a + 180°C
CorTransparente no interior; revestido de vermelho no exterior
ПараметрыЗначениеЕдиницаСтандарт
Эластомерная основаШланг из силиконовой ткани
ГеометрияШланг
Плотность1,16   +/- 0.05g/cm3DIN 53479 A
Твердость70   +/- 5Shore ADIN 53505
Сопротивление разрыву11,3%DIN 53504 S1
Удлинение слезы500%DIN 53504 S1
Сопротивление разрыву25N/mmASTM D 624 B
Устойчивость к перегрузкам53%DIN 53512
Набор для сжатия35 % при 175 °C; 22 ч%DIN 53517
Температурная стойкость- от 60 до + 180°C
ЦветПрозрачный внутри, снаружи покрыт красной краской
ParametrelerDeğerBirimStandart
Elastomer matrisiSilikon kumaş hortum
GeometriHortum
Yoğunluk1,16   +/- 0.05g/cm3DIN 53479 A
Sertlik70   +/- 5Shore ADIN 53505
Yırtılma direnci11,3%DIN 53504 S1
Yırtılma uzaması500%DIN 53504 S1
Yırtılma direnci25N/mmASTM D 624 B
Geri tepme esnekliği53%DIN 53512
Sıkıştırma yer değiştirmesi175 ° C'de% 35; 22 saat%DIN 53517
Sıcaklık dayanımı-60'dan +180'e°C
Renkİç şeffaflık Dış kıpkırmızı boyalı
ParaméterekértékEgységekSzabvány
Elasztomer mátrixSzilikon szövet tömlő
GeometriaTömlő
Sűrűség1,16   +/- 0.05g/cm3DIN 53479 A
Keménység70   +/- 5Shore ADIN 53505
Tépésállóság11,3%DIN 53504 S1
Tear nyúlás500%DIN 53504 S1
Tépésállóság25N/mmASTM D 624 B
Rugalmas rugalmasság53%DIN 53512
Kompressziós elmozdulás35% 175 °C-on; 22 óra%DIN 53517
Hőmérséklet ellenállás-60-+180-ig°C
SzínBelső átláthatóság; Külső festett piros
پارامترارزشواحداستاندارد
ماتریس الاستومرشیلنگ پارچه سیلیکون
هندسهشیلنگ
تراکم1,16   +/- 0.05g/cm3DIN 53479 A
سختی70   +/- 5Shore ADIN 53505
مقاومت در برابر پارگی11,3%DIN 53504 S1
کشیدگی اشک500%DIN 53504 S1
مقاومت در برابر پارگی25N/mmASTM D 624 B
خاصیت ارتجاعی Springback53%DIN 53512
جابجایی فشرده سازی35٪ در دمای 175 درجه سانتیگراد ؛ 22 ساعت%DIN 53517
مقاومت در برابر دما60 تا +180°C
رنگشفافیت داخلی رنگ قرمز
ParametersWaardeEenheidStandaard
Elastomeer basisSilicone stofslang
MeetkundeSlang
Dichtheid1,16   +/- 0.05g/cm3DIN 53479 A
Hardheid70   +/- 5Shore ADIN 53505
Scheurvastheid11,3%DIN 53504 S1
Scheurverlenging500%DIN 53504 S1
Scheurvastheid25N/mmASTM D 624 B
Veerkracht bij opleving53%DIN 53512
Compressieset35 % bij 175 °C; 22 h%DIN 53517
Temperatuurbestendigheid- 60 tot + 180°C
KleurTransparante binnenkant; rood gecoat aan de buitenkant
ParametriiValoareUnitateaStandard
Baza elastomericăFurtun din silicon
GeometrieFurtun
Densitate1,16   +/- 0.05g/cm3DIN 53479 A
Duritate70   +/- 5Shore ADIN 53505
Rezistența la rupere11,3%DIN 53504 S1
Alungirea lacrimilor500%DIN 53504 S1
Rezistența la rupere25N/mmASTM D 624 B
Rezistența la revenire53%DIN 53512
Set de compresie35 % la 175 °C; 22 h%DIN 53517
Rezistența la temperatură- 60 până la + 180°C
CuloareTransparentă în interior; acoperită în roșu la exterior
ParametritArvoYksikköStandardi
ElastomeeripohjaSilikoninen kangasletku
GeometriaLetku
Tiheys1,16   +/- 0.05g/cm3DIN 53479 A
Kovuus70   +/- 5Shore ADIN 53505
Repimislujuus11,3%DIN 53504 S1
Kyynelten venyminen500%DIN 53504 S1
Repimislujuus25N/mmASTM D 624 B
Palautumisen sietokyky53%DIN 53512
Puristussarja35 % 175 °C:ssa; 22 h%DIN 53517
Lämpötilan kestävyys- 60 - + 180°C
VäriSisäpuoli läpinäkyvä, ulkopuoli pinnoitettu punaiseksi.
ParametreHodnotaJednotkaŠtandard
Elastomérový základSilikónová textilná hadica
GeometriaHadica
Hustota1,16   +/- 0.05g/cm3DIN 53479 A
Tvrdosť70   +/- 5Shore ADIN 53505
Odolnosť proti roztrhnutiu11,3%DIN 53504 S1
Predĺženie slzy500%DIN 53504 S1
Odolnosť proti roztrhnutiu25N/mmASTM D 624 B
Odolnosť voči opätovnému nárastu53%DIN 53512
Kompresná súprava35 % pri 175 °C; 22 h%DIN 53517
Odolnosť voči teplote- 60 až + 180°C
FarbaPriehľadný vnútrajšok; červený náter na vonkajšej strane
ParametreVærdiEnhedStandard
Basis af elastomerSlange af silikonestof
GeometriSlange
Tæthed1,16   +/- 0.05g/cm3DIN 53479 A
Hårdhed70   +/- 5Shore ADIN 53505
Modstandsdygtighed over for rivning11,3%DIN 53504 S1
Forlængelse af tårer500%DIN 53504 S1
Modstandsdygtighed over for rivning25N/mmASTM D 624 B
Modstandsdygtighed over for rebound53%DIN 53512
Kompressionssæt35 % ved 175 °C; 22 timer%DIN 53517
Temperaturbestandighed- 60 til + 180°C
FarveGennemsigtig indeni; belagt med rødt på ydersiden
ΠαράμετροιΑξίαΜονάδαΠρότυπο
Ελαστομερής βάσηΥφασμάτινος σωλήνας σιλικόνης
ΓεωμετρίαΕύκαμπτος σωλήνας
Πυκνότητα1,16   +/- 0.05g/cm3DIN 53479 A
Σκληρότητα70   +/- 5Shore ADIN 53505
Αντοχή στο δάκρυ11,3%DIN 53504 S1
Επιμήκυνση των δακρύων500%DIN 53504 S1
Αντοχή στο δάκρυ25N/mmASTM D 624 B
Ανθεκτικότητα στην ανάκαμψη53%DIN 53512
Σετ συμπίεσης35 % στους 175 °C- 22 ώρες%DIN 53517
Αντοχή στη θερμοκρασία- 60 έως + 180°C
ΧρώμαΔιαφανές εσωτερικά, με κόκκινη επίστρωση εξωτερικά
ПараметриСтойностЕдиницаСтандартен
Еластомерна основаМаркуч от силиконов плат
ГеометрияМаркуч
Плътност1,16   +/- 0.05g/cm3DIN 53479 A
Твърдост70   +/- 5Shore ADIN 53505
Устойчивост на разкъсване11,3%DIN 53504 S1
Удължаване на сълзите500%DIN 53504 S1
Устойчивост на разкъсване25N/mmASTM D 624 B
Устойчивост на възстановяване53%DIN 53512
Комплект за компресиране35 % при 175 °C; 22 часа%DIN 53517
Температурна устойчивост- 60 до + 180°C
ЦвятПрозрачен отвътре; червено покритие отвън
ParametrarVärdeEnhetStandard
Bas av elastomerSlang av silikonväv
GeometriSlang
Densitet1,16   +/- 0.05g/cm3DIN 53479 A
Hårdhet70   +/- 5Shore ADIN 53505
Rivhållfasthet11,3%DIN 53504 S1
Förlängning av tårar500%DIN 53504 S1
Rivhållfasthet25N/mmASTM D 624 B
Återhämtningsförmåga53%DIN 53512
Kompressionssats35 % vid 175 °C; 22 h%DIN 53517
Temperaturbeständighet- 60 till + 180°C
FärgTransparent inuti; rödlackerad på utsidan
ParametriVrednostEnotaStandard
Elastomerna osnovaCev iz silikonske tkanine
GeometrijaCev
Gostota1,16   +/- 0.05g/cm3DIN 53479 A
Trdota70   +/- 5Shore ADIN 53505
Odpornost na trganje11,3%DIN 53504 S1
Podaljšanje solz500%DIN 53504 S1
Odpornost na trganje25N/mmASTM D 624 B
Odpornost proti ponovnemu vzponu53%DIN 53512
Komplet za stiskanje35 % pri 175 °C; 22 ur%DIN 53517
Temperaturna odpornost- 60 do + 180°C
BarvaProzorna notranjost; rdeča prevleka na zunanji strani
ParameetridVäärtusÜksusStandard
Elastomeeri alusSilikoonkangast voolik
GeomeetriaVoolik
Tihedus1,16   +/- 0.05g/cm3DIN 53479 A
Kõvadus70   +/- 5Shore ADIN 53505
Rebenemiskindlus11,3%DIN 53504 S1
Pisarate pikenemine500%DIN 53504 S1
Rebenemiskindlus25N/mmASTM D 624 B
Tagasipöördumise vastupidavus53%DIN 53512
Kompressioonikomplekt35 % 175 °C juures; 22 h%DIN 53517
Temperatuurikindlus- 60 kuni + 180°C
VärvLäbipaistev seestpoolt; väljastpoolt kaetud punase värviga
ParametraiVertėVienetasStandartinis
Elastomero pagrindasSilikono audinio žarna
GeometrijaŽarna
Tankis1,16   +/- 0.05g/cm3DIN 53479 A
Kietumas70   +/- 5Shore ADIN 53505
Atsparumas plyšimui11,3%DIN 53504 S1
Ašarų pailgėjimas500%DIN 53504 S1
Atsparumas plyšimui25N/mmASTM D 624 B
Atsparumas atsigavimui53%DIN 53512
Suspaudimo rinkinys35 % 175 °C temperatūroje; 22 val.%DIN 53517
Atsparumas temperatūrai- nuo 60 iki + 180°C
SpalvaSkaidrus vidus; išorė padengta raudona danga
ParametriVērtībaVienībaStandarta
Elastomēra bāzeSilikona auduma šļūtene
ĢeometrijaŠļūtene
Blīvums1,16   +/- 0.05g/cm3DIN 53479 A
Cietība70   +/- 5Shore ADIN 53505
Izturība pret plīsumiem11,3%DIN 53504 S1
Asaru pagarināšanās500%DIN 53504 S1
Izturība pret plīsumiem25N/mmASTM D 624 B
Atgriešanās noturība53%DIN 53512
Kompresijas komplekts35 % pie 175 °C; 22 h%DIN 53517
Temperatūras izturība- 60 līdz + 180°C
KrāsaCaurspīdīgs iekšpusē; sarkans pārklājums ārpusē
ParameterWertEinheitNorm
ElastomerbasisSilikongewebeschlauch
GeometrieSchlauch
Dichte1,16   +/- 0.05g/cm3DIN 53479 A
Härte70   +/- 5Shore ADIN 53505
Reissfestigkeit11,3%DIN 53504 S1
Reissdehnung500%DIN 53504 S1
Weiterreisswiderstand25N/mmASTM D 624 B
Rückprallelastizität53%DIN 53512
Druckverformungsrest35 %  bei 175 °C; 22 h%DIN 53517
Temperaturbeständigkeit– 60 bis + 180°C
FarbeInnen transparent; aussen rot beschichtet
ParameterWertEinheitNorm
ElastomerbasisSilikongewebeschlauch
GeometrieSchlauch
Dichte1,16   +/- 0.05g/cm3DIN 53479 A
Härte70   +/- 5Shore ADIN 53505
Reissfestigkeit11,3%DIN 53504 S1
Reissdehnung500%DIN 53504 S1
Weiterreisswiderstand25N/mmASTM D 624 B
Rückprallelastizität53%DIN 53512
Druckverformungsrest35 %  bei 175 °C; 22 h%DIN 53517
Temperaturbeständigkeit– 60 bis + 180°C
FarbeInnen transparent; aussen rot beschichtet
Do you have any questions about our offer?
Silicone fabric hose - pressure hose
Request a callback
Direct inquiry

Transparent silicone fabric hose for compressed air systems

As a distributor of silicone fabric hose - pressure hose, we offer you the best quality and selection. Our range includes high pressure silicone fabric hoses for industrial applications that are characterized by their durability and robustness. These hoses are specially designed to withstand extreme conditions and provide you with reliable performance.

Our flexible silicone fabric pressure hoses are perfect for transporting chemical fluids. They are particularly resistant to aggressive media and therefore offer you safety and reliability in your application. If you are looking for a temperature-resistant silicone fabric hose for compressed air, you have come to the right place. These hoses are designed to withstand high temperatures and provide you with consistently optimum performance.

Another highlight in our range is the transparent silicone fabric hose for compressed air systems. Thanks to its transparency, you can monitor the flow of your liquids or gases at all times and ensure that everything runs smoothly. For particularly demanding high-pressure applications, we offer heat-resistant silicone fabric hoses. These hoses are ideal when you need to combine high temperatures and pressures.

As a distributor of silicone fabric hoses - pressure hoses, we know how important it is that your equipment is reliable and durable. That's why we take great care to only offer products that meet the highest quality standards. Our goal is to provide you with hoses that not only meet your requirements, but also exceed your expectations.

We know that every application is unique. That's why we are happy to advise you personally and work with you to find the perfect silicone fabric hose for your specific requirements. Whether you need a high-pressure silicone fabric hose for industrial applications, a flexible silicone fabric pressure hose for chemical fluids or a temperature-resistant silicone fabric hose for compressed air - you are guaranteed to find the right product with us.

Rely on our experience and expertise as a distributor of silicone fabric hose - pressure hose. Contact us today and let us convince you of our offer!
What can we do for you?
Contact our product experts
Dominik        Grahammer
Dominik Grahammer
Sales- and Productmanagement
+49 8341 9340348
[email protected]
Direct inquiry
Request a callback
What can we do for you?
Contact our product experts
Rotima Oliver Bürli
Oliver Bürli
Head of Hose Technology, Sales and Product Management
+41 44 927 26 38
[email protected]
Direct inquiry
Request a callback

Do you have any questions about:

Silicone fabric hose - pressure hose

Just send us a short message and we will be happy to answer your questions by phone or e-mail.
Send
Questions?
Write to us!

Would you like to find out more about our high-quality products?

We have a large warehouse, short delivery times and duty-free delivery!

Do not hesitate to contact us, we will be happy toadvise you personally.
Your contact persons
Request a callback

Would you like a personal telephone consultation?

Simply fill out the form and we will get back to you.
Request a callback now

What are the advantages of using DC voltage transformers compared to AC voltage transformers?

Fields marked with * are mandatory fields
Send

What are the advantages of using DC voltage transformers compared to AC voltage transformers?

X

Our hoses at a glance

Because the part makes the price. Just enter your email and we will send you our catalog free of charge.
Receive catalog now
Request catalog

Frequently asked questions about silicone fabric tubing

1. what are the main advantages of silicone fabric hoses - pressure hoses?

Silicone fabric hoses offer high temperature resistance, are very flexible and resistant to many chemical fluids. They are durable and ideal for use in demanding environments. Their transparency allows for easy flow control.

2. which applications are silicone fabric hoses - pressure hoses suitable for?

Silicone fabric hoses are often used in industrial applications, compressed air systems and the transportation of chemical fluids. They are also ideal for high-pressure applications where high temperatures can occur.

3. how do I choose the right silicone fabric hose - pressure hose for my needs?

When selecting the right hose, you should consider the specific area of application. Check the requirements for temperature and pressure resistance as well as the chemical resistance of the hose. Flexibility and the right size are also important factors.

4. what properties should silicone fabric hoses - pressure hoses have?

Silicone fabric hoses should have high compressive strength and temperature resistance. They should be flexible and resistant to chemical substances. Transparency can also be an important property for monitoring the flow.

5. How do I care for and maintain my silicone fabric hose - pressure hose?

It is important to check the hose regularly for wear and damage. Clean the hose according to the manufacturer's instructions and avoid extreme bending and torsion. Timely replacement in the event of visible damage or after the recommended service life ensures that the hose remains reliable.
YOUR WAY TO US IN SWITZERLAND:
Switzerland
© ROTIMA AG
Industriestrasse 14 · CH-8712 Stäfa
YOUR WAY TO US IN GERMANY:
Germany
© Rotima GmbH
Innovapark 20 · 87600 Kaufbeuren
Change your consent
  • Sitemap
  • Legal Notice
  • Data protection
  • GTC
ROTIMA Marketing Cellphone Kontakt
We are looking forward
to your call!
Switzerland
+41 44 927 26 26
[email protected]
Germany
+49 8341 9340320
[email protected]
Each application is
individual
Switzerland
+41 44 927 26 26
[email protected]
Germany
+49 8341 9340320
[email protected]
Make a request
Request a callback