Heat-shrink tubing halogen-free thin-walled Dealer
- Large selection of halogen-free thin-walled heat-shrink tubing
- For the electrical engineering and electronics business
- A direct line instead of a waiting loop - we are there for you
Over 60 years of experience
in the electrical engineering and electronics industry
Short delivery times
through optimized warehousing
Germany and Switzerland
Dual location strength and reliability
Halogen-free, thin-walled heat-shrink tubing in our range:
In our range of halogen-free thin-wall heat shrink tubing, you will find a variety of sizes, colors and materials that meet all industry-standard specifications and are suitable for precise applications. Each halogen-free thin wall heat shrink tubing in our range has been carefully selected to ensure the highest quality and performance.
Below you will find detailed size and technical data tables for each of our halogen-free thin wall heat shrink tubing. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right tubing for your specific requirements.
Below you will find detailed size and technical data tables for each of our halogen-free thin wall heat shrink tubing. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right tubing for your specific requirements.
Heat shrink tubing halogen-free thin-walled - Size chart
Heat-shrink tubing, halogen-free, thin-walled - Technical data
| Material | Polyolefin |
| Wandung | dünnwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 3 : 1 |
| Dauerbetriebstemperatur | -55 ºC bis + 135 ºC |
| Min. Schrumpftemperatur | 120 ºC |
| Zugfestigkeit (N/mm2) | 18 |
| Bruchdehnung (%) | 400 |
| Längsschrumpf | -5 % max. |
| Durchschlagfestigkeit | 350 kV / cm |
| Halogen | halogenfrei |
| Selbstverlöschend | nicht selbstverlöschend |
| Material | Polyolefin |
| Wall | thin-walled |
| Glue | ohne Innenkleber |
| Shrinkage ratio | 3 : 1 |
| Continuous operating temperature | -55 ºC to + 135 ºC |
| Min. shrink temperature | 120 ºC |
| Tensile strength (N/mm2) | 18 |
| Elongation at break (%) | 400 |
| Longitudinal shrinkage | -5 % max. |
| Dielectric strength | 350 kV / cm |
| Halogen | halogen-free |
| Self-extinguishing | not self-extinguishing |
| Material | Poliolefina |
| Pared | Paredes finas |
| Pegamento | ohne Innenkleber |
| Índice de contracción | 3 : 1 |
| Temperatura de funcionamiento continuo | -55 ºC a + 135 ºC |
| Temperatura mínima de retracción | 120 ºC |
| Resistencia a la tracción (N/mm2) | 18 |
| Alargamiento a la rotura (%) | 400 |
| Contracción longitudinal | -5 % max. |
| Rigidez dieléctrica | 350 kV / cm |
| Halógeno | sin halógenos |
| Autoextinguible | No autoextinguible |
| Materiał | Poliolefina |
| Ściana | Cienkościenne |
| Klej | ohne Innenkleber |
| Współczynnik skurczu | 3 : 1 |
| Temperatura pracy ciągłej | -55 °C do + 135 °C |
| Min. temperatura obkurczania | 120 ºC |
| Wytrzymałość na rozciąganie (N/mm2) | 18 |
| Wydłużenie przy zerwaniu (%) | 400 |
| Skurcz wzdłużny | -5 % max. |
| Wytrzymałość dielektryczna | 350 kV / cm |
| Halogen | bezhalogenowy |
| Samogasnący | Nie jest samogasnący |
| Matériau | Polyoléfine |
| Paroi | à paroi mince |
| Colle | ohne Innenkleber |
| Rapport de rétraction | 3 : 1 |
| Température de fonctionnement continu | -55 ºC à + 135 ºC |
| Température de rétraction min. | 120 ºC |
| Résistance à la traction (N/mm2) | 18 |
| Allongement à la rupture (%) | 400 |
| Rétraction longitudinale | -5 % max. |
| Rigidité diélectrique | 350 kV / cm |
| Halogène | sans halogène |
| Auto-extinguible | non auto-extinguible |
| Materiale | Poliolefina |
| Muro | A parete sottile |
| Colla | ohne Innenkleber |
| Rapporto di restringimento | 3 : 1 |
| Temperatura di esercizio continua | Da -55 ºC a + 135 ºC |
| Temperatura minima di termoretrazione | 120 ºC |
| Resistenza alla trazione (N/mm2) | 18 |
| Allungamento a rottura (%) | 400 |
| Ritiro longitudinale | -5 % max. |
| Rigidità dielettrica | 350 kV / cm |
| Alogeno | senza alogeni |
| Autoestinguente | Non autoestinguente |
| المواد | البولي أوليفين |
| جدران | رقيقة الجدران |
| لاصق | ohne Innenkleber |
| معدل الانكماش | 3 : 1 |
| درجة حرارة العمل المستمر | - من 55 درجة مئوية إلى +135 درجة مئوية |
| قطرة درجة حرارة الانكماش | 120 ºC |
| قوة الشد ( نيوتن/مم2 ) | 18 |
| الاستطالة عند الكسر ( ٪ ) | 400 |
| الانكماش الطولي | -5 % max. |
| قوة عازلة | 350 kV / cm |
| هالوجين | خالية من الهالوجين |
| إطفاء ذاتي | لا تطفئ نفسها |
| 재료 | 폴리올레핀 |
| 벽 | 얇은 벽 |
| 접합 | ohne Innenkleber |
| 수축 | 3 : 1 |
| 연속 작동 온도 | -55°C ~ +135°C |
| 드롭 수축 온도 재기 | 120 ºC |
| 인장 강도(N/mm2) | 18 |
| 끊기 신장 비율(%) | 400 |
| 수직 수축 | -5 % max. |
| 유전 강도 | 350 kV / cm |
| 할로겐 | 할로겐을 사용하지 않음 |
| 자기 꺼짐 | 꺼지지 않는 |
| 素材 | ポリオレフィン |
| 壁 | 薄肉 |
| 接着剤 | ohne Innenkleber |
| 収縮率 | 3 : 1 |
| .連続使用温度 | -55 ºC ～ + 135 ºC |
| 最低収縮温度 | 120 ºC |
| 引張強さ (N/mm2) | 18 |
| 破断伸度(%) | 400 |
| ののー長手方向収縮 | -5 % max. |
| 絶縁耐力 | 350 kV / cm |
| ハロゲン | ハロゲンフリー |
| 自己消火性 | 自己消火性はない |
| 材料 | 聚烯烃 |
| 墙 | 薄壁的 |
| 胶合 | ohne Innenkleber |
| 收缩率 | 3 : 1 |
| 连续工作温度 | -55°C至+135°C |
| 量滴收缩温度 | 120 ºC |
| 抗拉强度（N/mm2） | 18 |
| 断裂伸长率（%） | 400 |
| 纵向收缩 | -5 % max. |
| 介电强度 | 350 kV / cm |
| 卤素 | 无卤素 |
| 自熄的 | 不自熄的 |
| Materiál | Polyolefin |
| Stěna | Tenké stěny |
| Lepení | ohne Innenkleber |
| Smršťování | 3 : 1 |
| Průběžná pracovní teplota | -55°C až +135°C |
| Teplota smrštění kapiček | 120 ºC |
| Pevnost v tahu (N/mm2) | 18 |
| Prodloužení při přetržení (%) | 400 |
| Podélné smrštění | -5 % max. |
| Dielektrická pevnost | 350 kV / cm |
| Halogenin | Halogenin |
| Samozhášecí | Není samozhášecí |
| Material | Poliolefina |
| Parede | Paredes finas |
| Cola | ohne Innenkleber |
| Rácio de retração | 3 : 1 |
| Temperatura de funcionamento contínuo | -55 ºC a + 135 ºC |
| Temperatura mínima de contração | 120 ºC |
| Resistência à tração (N/mm2) | 18 |
| Alongamento na rutura (%) | 400 |
| Contração longitudinal | -5 % max. |
| Resistência dieléctrica | 350 kV / cm |
| Halogéneo | sem halogéneos |
| Auto-extinguível | Não auto-extinguível |
| Материал | Полиолефин |
| Стена | Тонкостенные |
| Клей | ohne Innenkleber |
| Коэффициент усадки | 3 : 1 |
| Непрерывная рабочая температура | от -55 ºC до + 135 ºC |
| Минимальная температура усадки | 120 ºC |
| Прочность на разрыв (Н/мм2) | 18 |
| Удлинение при разрыве (%) | 400 |
| Продольная усадка | -5 % max. |
| Диэлектрическая прочность | 350 kV / cm |
| Галоген | без галогенов |
| Самозатухающий | Не самозатухающий |
| Malzeme | Poliolefin |
| Duvar | Ince duvarlı |
| Yapıştırma | ohne Innenkleber |
| Büzülme | 3 : 1 |
| Sürekli çalışma sıcaklığı | -55°C-+135°C |
| Damlama büzülme sıcaklığı | 120 ºC |
| Çekme mukavemeti (N/mm2) | 18 |
| Kopma uzaması (%) | 400 |
| Boyuna kasılma | -5 % max. |
| Dielektrik dayanım | 350 kV / cm |
| Halojen | Halojensiz |
| Kendiliğinden sönen | Kendiliğinden sönmez |
| Anyagok | Poliolefin |
| Fal | Vékonyfalú |
| Ragasztás | ohne Innenkleber |
| Zsugorodás mértéke | 3 : 1 |
| Folyamatos üzemi hőmérséklet | -55 °C és +135 °C között |
| Csepp zsugorodási hőmérséklet | 120 ºC |
| Szakítószilárdság (N/mm2) | 18 |
| Szakadási nyúlás (%) | 400 |
| Hosszirányú zsugorodás | -5 % max. |
| Dielektromos szilárdság | 350 kV / cm |
| Halogéneket | Halogénmentes |
| önkioltó | Nem önkioltó |
| مواد | پلی الیفین |
| دیوار | دیواره نازک |
| چسب | ohne Innenkleber |
| انقباض | 3 : 1 |
| دمای کار مداوم | 55 درجه سانتیگراد تا 135 درجه سانتیگراد |
| اندازه گیری دمای انقباض قطره | 120 ºC |
| استحکام کششی (N/mm2) | 18 |
| کشیدگی در زمان استراحت (٪) | 400 |
| انقباض طولی | -5 % max. |
| مقاومت دی الکتریک | 350 kV / cm |
| هالوژن | عاری از هالوژن |
| خود خاموش | خاموش نیست |
| Materiaal | Polyolefine |
| Muur | Dunwandig |
| Lijm | ohne Innenkleber |
| Krimpverhouding | 3 : 1 |
| Continue bedrijfstemperatuur | -55 ºC tot + 135 ºC |
| Min. krimptemperatuur | 120 ºC |
| Treksterkte (N/mm2) | 18 |
| Rek bij breuk (%) | 400 |
| Longitudinale krimp | -5 % max. |
| Diëlektrische sterkte | 350 kV / cm |
| Halogeen | halogeenvrij |
| Zelfdovend | Niet zelfdovend |
| Material | Poliolefină |
| Perete | Cu pereți subțiri |
| Lipici | ohne Innenkleber |
| Raportul de contracție | 3 : 1 |
| Temperatura de funcționare continuă | -55 ºC până la + 135 ºC |
| Temperatura minimă de contracție | 120 ºC |
| Rezistența la tracțiune (N/mm2) | 18 |
| Alungirea la rupere (%) | 400 |
| Retragere longitudinală | -5 % max. |
| Rezistența dielectrică | 350 kV / cm |
| Halogen | fără halogen |
| Autoextincție | Nu se stinge singur |
| Materiaali | Polyolefiini |
| Seinä | Ohutseinäiset |
| Liima | ohne Innenkleber |
| Kutistumissuhde | 3 : 1 |
| Jatkuva käyttölämpötila | -55 ºC - + 135 ºC |
| Min. kutistumislämpötila | 120 ºC |
| Vetolujuus (N/mm2) | 18 |
| Murtovenymä (%) | 400 |
| Pituussuuntainen kutistuminen | -5 % max. |
| Dielektrinen lujuus | 350 kV / cm |
| Halogeeni | halogeenivapaa |
| Itsestään sammuva | Ei itsestään sammuva |
| Materiál | Polyolefín |
| Stena | Tenkostenné |
| Lepidlo | ohne Innenkleber |
| Pomer zmrštenia | 3 : 1 |
| Trvalá prevádzková teplota | -55 °C až + 135 °C |
| Min. teplota zmršťovania | 120 ºC |
| Pevnosť v ťahu (N/mm2) | 18 |
| Predĺženie pri pretrhnutí (%) | 400 |
| Pozdĺžne zmrštenie | -5 % max. |
| Dielektrická pevnosť | 350 kV / cm |
| Halogén | bezhalogénové |
| Samozhášacie | Nie je samozhášací |
| Materiale | Polyolefin |
| Væg | Tyndvægget |
| Lim | ohne Innenkleber |
| Krympningsforhold | 3 : 1 |
| Kontinuerlig driftstemperatur | -55 ºC til + 135 ºC |
| Min. krympetemperatur | 120 ºC |
| Trækstyrke (N/mm2) | 18 |
| Forlængelse ved brud (%) | 400 |
| Krympning i længderetningen | -5 % max. |
| Dielektrisk styrke | 350 kV / cm |
| Halogen | halogenfri |
| Selvslukkende | Ikke selvslukkende |
| Υλικό | Πολυολεφίνη |
| Τοίχος | Λεπτότοιχα |
| Κόλλα | ohne Innenkleber |
| Αναλογία συρρίκνωσης | 3 : 1 |
| Συνεχής θερμοκρασία λειτουργίας | -55 ºC έως +135 ºC |
| Ελάχιστη θερμοκρασία συρρίκνωσης | 120 ºC |
| Αντοχή σε εφελκυσμό (N/mm2) | 18 |
| Επιμήκυνση κατά τη θραύση (%) | 400 |
| Διαμήκης συρρίκνωση | -5 % max. |
| Διηλεκτρική αντοχή | 350 kV / cm |
| Αλογόνο | χωρίς αλογόνα |
| Αυτοσβενόμενο | Δεν είναι αυτοσβενόμενο |
| Материал | Полиолефин |
| Стена | Тънкостенни |
| Лепило | ohne Innenkleber |
| Коефициент на свиване | 3 : 1 |
| Непрекъсната работна температура | -55 ºC до +135 ºC |
| Минимална температура на свиване | 120 ºC |
| Якост на опън (N/mm2) | 18 |
| Удължение при скъсване (%) | 400 |
| Надлъжно свиване | -5 % max. |
| Диелектрична якост | 350 kV / cm |
| Халогенни | безхалогенни |
| Самозагасващ се | Не е самозагасващ се |
| Material | Polyolefin |
| Vägg | Tunnväggig |
| Lim | ohne Innenkleber |
| Krympningsgrad | 3 : 1 |
| Kontinuerlig driftstemperatur | -55 ºC till + 135 ºC |
| Min. temperatur för krympning | 120 ºC |
| Draghållfasthet (N/mm2) | 18 |
| Förlängning vid brott (%) | 400 |
| Krympning i längdriktningen | -5 % max. |
| Dielektrisk styrka | 350 kV / cm |
| Halogen | halogenfri |
| Självslocknande | Inte självslocknande |
| Material | Poliolefin |
| Stena | Tankostenski |
| Lepilo | ohne Innenkleber |
| Razmerje krčenja | 3 : 1 |
| Trajna delovna temperatura | -55 ºC do + 135 ºC |
| Min. temperatura krčenja | 120 ºC |
| Natezna trdnost (N/mm2) | 18 |
| Podaljšek ob pretrgu (%) | 400 |
| Vzdolžno krčenje | -5 % max. |
| Dielektrična trdnost | 350 kV / cm |
| Halogenski | brez halogenov |
| Samougasljiv | Ni samougasljiv |
| Materjal | Polüolefiin |
| Seina | Õhukesed seinad |
| Liim | ohne Innenkleber |
| Kahanemise suhe | 3 : 1 |
| Pidev töötemperatuur | -55 ºC kuni + 135 ºC |
| Min. kokkutõmbumistemperatuur | 120 ºC |
| Tõmbetugevus (N/mm2) | 18 |
| Pikendus murdumisel (%) | 400 |
| Pikisuunaline kahanemine | -5 % max. |
| Dielektriline tugevus | 350 kV / cm |
| Halogeen | halogeenivaba |
| Isekustuv | Ei ole isekustuv |
| Medžiaga | Poliolefinas |
| Siena | Plonasienis |
| Klijai | ohne Innenkleber |
| Susitraukimo santykis | 3 : 1 |
| Nuolatinė darbinė temperatūra | nuo -55 °C iki +135 °C |
| Minimali susitraukimo temperatūra | 120 ºC |
| Tempimo stipris (N/mm2) | 18 |
| Pailgėjimas nutrūkus (%) | 400 |
| Išilginis susitraukimas | -5 % max. |
| Dielektrinis stipris | 350 kV / cm |
| Halogeninis | be halogenų |
| Savaime užgęstantis | Ne savaime neužsidegantis |
| Materiāls | Poliolefīns |
| Siena | Plānsienu |
| Līme | ohne Innenkleber |
| Saraušanās koeficients | 3 : 1 |
| Pastāvīgā darba temperatūra | -55 ºC līdz + 135 ºC |
| Min. saraušanās temperatūra | 120 ºC |
| Stiepes izturība (N/mm2) | 18 |
| Pagarinājums pārraušanas brīdī (%) | 400 |
| Gareniskā saraušanās | -5 % max. |
| Dielektriskā izturība | 350 kV / cm |
| Halogēna | bezhalogēnu |
| Pašdzēsošs | Nav pašdzēsošs |
| Material | Polyolefin |
| Wandung | dünnwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 3 : 1 |
| Dauerbetriebstemperatur | -55 ºC bis + 135 ºC |
| Min. Schrumpftemperatur | 120 ºC |
| Zugfestigkeit (N/mm2) | 18 |
| Bruchdehnung (%) | 400 |
| Längsschrumpf | -5 % max. |
| Durchschlagfestigkeit | 350 kV / cm |
| Halogen | halogenfrei |
| Selbstverlöschend | nicht selbstverlöschend |
| Material | Polyolefin |
| Wandung | dünnwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 3 : 1 |
| Dauerbetriebstemperatur | -55 ºC bis + 135 ºC |
| Min. Schrumpftemperatur | 120 ºC |
| Zugfestigkeit (N/mm2) | 18 |
| Bruchdehnung (%) | 400 |
| Längsschrumpf | -5 % max. |
| Durchschlagfestigkeit | 350 kV / cm |
| Halogen | halogenfrei |
| Selbstverlöschend | nicht selbstverlöschend |
Heat shrink tubing halogen-free thin-walled - Technical data sheet for download
For detailed information on our halogen-free thin-walled heat shrink tubing, we offer you a comprehensive technical data sheet for download. This data sheet contains all the important technical specifications, including material composition, temperature resistance and electrical insulation properties. You will also find detailed information on the dimensions and availability of our products.
Download: Technical data sheet
Do you have any questions about our offer?
Heat-shrink tubing, halogen-free, thin-walled
Halogen-free thin-walled shrink tubing for electronics
As a distributor of heat shrink tubing halogen-free thin-walled, we offer a wide range of high-quality products. Our range includes halogen-free thin-walled heat shrink tubing for electronics and heat shrink tubing for cable protection. These special heat shrink tubes are ideal for industrial applications and offer high heat resistance.
Our halogen-free thin-wall heat shrink tubing is perfect for anyone who values safety and quality. These products are particularly popular in electronics as they are reliable and robust. With our halogen-free thin-wall heat shrink tubing, you can effectively protect your cables while ensuring a clean and safe installation.
If you are looking for a distributor of halogen-free thin-walled heat shrink tubing, you have come to the right place. We offer you a wide range of products that have been specially developed for industrial applications. Our thin-walled halogen-free heat shrink tubing is particularly resistant and can withstand high temperatures without any problems.
Our customers particularly appreciate the high quality and durability of our products. The thin-walled halogen-free heat shrink tubing is easy to handle and offers excellent protection for your cables. Whether you need heat shrink tubing for electronic devices or for other applications, we have the right product for you.
Halogen-free thin-walled heat shrink tubing for electronics is one of our specialties. We know how important it is to use reliable and safe materials. That's why we only offer high-quality halogen-free thin-wall heat shrink tubing that meets and exceeds your requirements.
As a distributor of halogen-free thin-wall heat shrink tubing, we place great importance on customer satisfaction. We always strive to offer you the best products and the best service. If you have any questions about our products or would like advice, we will be happy to help.
In summary, we offer you high-quality halogen-free thin-walled heat shrink tubing, which is characterized by its high heat resistance and its versatile application possibilities. You can rely on our experience and our extensive range when it comes to thin-walled halogen-free heat shrink tubing for industrial applications. You are guaranteed to find the right heat shrink tubing for your needs.
Our halogen-free thin-wall heat shrink tubing is perfect for anyone who values safety and quality. These products are particularly popular in electronics as they are reliable and robust. With our halogen-free thin-wall heat shrink tubing, you can effectively protect your cables while ensuring a clean and safe installation.
If you are looking for a distributor of halogen-free thin-walled heat shrink tubing, you have come to the right place. We offer you a wide range of products that have been specially developed for industrial applications. Our thin-walled halogen-free heat shrink tubing is particularly resistant and can withstand high temperatures without any problems.
Our customers particularly appreciate the high quality and durability of our products. The thin-walled halogen-free heat shrink tubing is easy to handle and offers excellent protection for your cables. Whether you need heat shrink tubing for electronic devices or for other applications, we have the right product for you.
Halogen-free thin-walled heat shrink tubing for electronics is one of our specialties. We know how important it is to use reliable and safe materials. That's why we only offer high-quality halogen-free thin-wall heat shrink tubing that meets and exceeds your requirements.
As a distributor of halogen-free thin-wall heat shrink tubing, we place great importance on customer satisfaction. We always strive to offer you the best products and the best service. If you have any questions about our products or would like advice, we will be happy to help.
In summary, we offer you high-quality halogen-free thin-walled heat shrink tubing, which is characterized by its high heat resistance and its versatile application possibilities. You can rely on our experience and our extensive range when it comes to thin-walled halogen-free heat shrink tubing for industrial applications. You are guaranteed to find the right heat shrink tubing for your needs.
What can we do for you?
Contact our product experts
What can we do for you?
Contact our product experts
Oliver Bürli
Head of Hose Technology, Sales and Product Management
Do you have any questions about:
Heat-shrink tubing, halogen-free, thin-walled
Just send us a short message and we will be happy to answer your questions by phone or e-mail.
Questions?
Write to us!
Would you like to find out more about our high-quality products?
We have a large warehouse, short delivery times and duty-free delivery!
Do not hesitate to contact us, we will be happy toadvise you personally.
Do not hesitate to contact us, we will be happy toadvise you personally.
Your contact persons
Request a callback
Would you like a personal telephone consultation?
Simply fill out the form and we will get back to you.
What are the advantages of using DC voltage transformers compared to AC voltage transformers?
Please fill out the form below to download the data sheet for this product.
What are the advantages of using DC voltage transformers compared to AC voltage transformers?
You can now click and download the PDF documents as usual.
X
Get in touch with us
Our hoses at a glance
Because the part makes the price. Just enter your email and we will send you our catalog free of charge.
Request catalog
Frequently asked questions about heat-shrinkable tubing, halogen-free, thin-walled
1. Why shrink tubing halogen-free thin-walled?
- High level of safety, as no toxic fumes when heat is generated
- Environmentally friendly due to the absence of halogens
- Excellent insulation properties
- Good mechanical strength
2. for which applications is the halogen-free thin-walled heat-shrink tubing suitable?
- Electronics and electrical devices
- Cable protection and insulation
- Industrial applications with high temperature requirements
- Automotive industry
3. what is the temperature resistance of the halogen-free thin-walled shrink tubing?
- Withstands high temperatures up to 125°C
- Ideal for applications with intensive heat generation
- Stable even at low temperatures down to -55°C
4. How is the thin-walled shrink tubing installed?
- First slide the heat-shrink tubing over the cable or connection
- Heat evenly with a heat gun or similar tool
- The shrink sleeve contracts and adapts to the shape of the cable
- Ensure that the heat shrink tubing is shrunk evenly to ensure optimum protection
5. What sizes and colors are available?
- Available in various diameters, from 1mm to 50mm
- Various colors, e.g. black, transparent, red, blue, yellow and green
- Choice of size depending on application and cable diameter
- Color coding possible for easy identification of cables and connections
