Silicone heat shrink tubing dealer
- Large selection of silicone shrink tubing
- For the electrical engineering and electronics business
- A direct line instead of a waiting loop - we are there for you
Over 60 years of experience
in the electrical engineering and electronics industry
Short delivery times
through optimized warehousing
Germany and Switzerland
Dual location strength and reliability
Silicone shrink tubing in our range:
In our range you will find a variety of sizes, colors and materials that meet all industry-standard specifications and are suitable for precise applications. Each product in our range has been carefully selected to ensure the highest quality and performance.
Below you will find detailed tables with sizes and technical data for each of our hoses. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right hose for your specific requirements.
Below you will find detailed tables with sizes and technical data for each of our hoses. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right hose for your specific requirements.
Silicone heat shrink tubing - size chart
| Durchmesser vor dem Schrumpfen in mm | Durchmesser nach dem Schrumpfen in mm | Wandstärke in mm | Rollengrösse in Meter |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Diameter before shrinking in mm | Diameter after shrinking in mm | Wall thickness in mm | Roll size in meters |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Diámetro antes de la contracción en mm | Diámetro después de la contracción en mm | Espesor de pared en mm | Tamaño del rollo en metros |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Średnica przed obkurczeniem w mm | Średnica po skurczeniu w mm | Grubość ścianki w mm | Rozmiar rolki w metrach |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Diamètre avant rétraction en mm | Diamètre après rétraction en mm | Épaisseur de paroi en mm | Taille du rouleau en mètres |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Diametro prima del restringimento in mm | Diametro dopo il restringimento in mm | Spessore della parete in mm | Dimensioni del rotolo in metri |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| قطر قبل الانكماش في مم | القطر بعد تقلص في مم | سمك الجدار في مم | حجم لفة بالأمتار |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| 수축 전의 지름 (mm) | 수축 후 지름 (mm) | 벽 두께 (mm) | 롤러 크기 (미터) |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| 収縮前の直径（mm | 収縮後の直径（mm | 肉厚 mm | ロールサイズ（メートル |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| 收缩前直径，单位为mm | 收缩后的直径，单位为mm | 壁厚（毫米） | 以米为单位的卷尺寸 |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Průměr před smršťováním v mm | Průměr po smršťování v mm | Tloušťka stěny v mm | Velikost válce v metrech |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Diâmetro antes do encolhimento em mm | Diâmetro após retração em mm | Espessura da parede em mm | Tamanho do rolo em metros |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Диаметр до усадки в мм | Диаметр после усадки в мм | Толщина стенки в мм | Размер рулона в метрах |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Küçülmeden önce mm | Mm olarak daraldıktan sonra çap | Duvar kalınlığı mm | Rulo boyutu metre olarak |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Iameter csökkenés előtt mm-ben | Iameter csökkenés után mm-ben | Minden vastagság mm-ben | OLL méret méterben |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| قطر قبل از کوچک شدن در میلی متر | قطر بعد از کوچک شدن در میلی متر | ضخامت دیواره به میلی متر | اندازه رول در متر |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Diameter vóór krimpen in mm | Diameter na krimpen in mm | Wanddikte in mm | Rolgrootte in meters |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Diametrul înainte de contracție în mm | Diametrul după contracție în mm | Grosimea peretelui în mm | Dimensiunea rolei în metri |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Halkaisija ennen kutistamista, mm | Halkaisija kutistamisen jälkeen, mm | Seinämän paksuus mm | Rullan koko metreinä |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Priemer pred zmenšením v mm | Priemer po zmrštení v mm | Hrúbka steny v mm | Veľkosť rolky v metroch |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Diameter før krympning i mm | Diameter efter krympning i mm | Vægtykkelse i mm | Rullestørrelse i meter |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Διάμετρος πριν από τη συρρίκνωση σε mm | Διάμετρος μετά τη συρρίκνωση σε mm | Πάχος τοιχώματος σε mm | Μέγεθος ρολού σε μέτρα |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Диаметър преди свиване в mm | Диаметър след свиване в mm | Дебелина на стената в mm | Размер на ролката в метри |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Diameter före krympning i mm | Diameter efter krympning i mm | Väggtjocklek i mm | Rullens storlek i meter |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Premer pred krčenjem v mm | Premer po krčenju v mm | Debelina stene v mm | Velikost zvitka v metrih |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Läbimõõt enne kokkutõmbamist, mm | Läbimõõt pärast kokkutõmbamist, mm | Seina paksus millimeetrites | Rulli suurus meetrites |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Skersmuo prieš susitraukimą, mm | Skersmuo po susitraukimo, mm | Sienelės storis mm | Ritinio dydis metrais |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Diametrs pirms saraušanas, mm | Diametrs pēc saraušanās mm | Sienas biezums mm | Ruļļa izmērs metros |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Durchmesser vor dem Schrumpfen in mm | Durchmesser nach dem Schrumpfen in mm | Wandstärke in mm | Rollengrösse in Meter |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
| Durchmesser vor dem Schrumpfen in mm | Durchmesser nach dem Schrumpfen in mm | Wandstärke in mm | Rollengrösse in Meter |
| 1.00 | 0.60 | 1.00 | 30.0 |
| 1.50 | 0.80 | 1.00 | 30.0 |
| 2.00 | 1.20 | 1.00 | 30.0 |
| 3.00 | 1.80 | 1.00 | 30.0 |
| 4.00 | 2.50 | 1.00 | 30.0 |
| 5.00 | 3.00 | 1.00 | 30.0 |
| 6.00 | 3.80 | 1.00 | 30.0 |
| 7.00 | 4.00 | 1.20 | 30.0 |
| 8.00 | 4.80 | 1.20 | 30.0 |
| 9.00 | 5.00 | 1.20 | 30.0 |
| 10.00 | 6.50 | 1.20 | 30.0 |
| 12.00 | 7.00 | 1.50 | 30.0 |
| 15.00 | 9.00 | 1.50 | 30.0 |
| 20.00 | 13.00 | 2.00 | 30.0 |
| 25.00 | 15.00 | 2.00 | 30.0 |
| 30.00 | 18.00 | 2.00 | 30.0 |
| 41.00 | 27.00 | 3.00 | 30.0 |
Silicone heat shrink tubing - Technical data
| Material | Silikon (VMQ) |
| Wandung | dünnwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 1.5 : 1 |
| Schrumpftemperatur (min.) | 80°C |
| Dauerbetriebstemperatur | -50 ºC bis + 200 ºC |
| Zugfestigkeit | >6.9 MPa |
| Längenänderung | +/-11 % max. |
| Durchschlagfestigkeit | >20 kV / mm |
| Eigenschaft | halogenfrei |
| Material | Silicone (VMQ) |
| Wall | thin-walled |
| Glue | without inside adhesive |
| Shrinkage ratio | 1.5 : 1 |
| Shrink temperature (min.) | 80°C |
| Continuous operating temperature | -50 ºC to + 200 ºC |
| Tensile strength | >6.9 MPa |
| Length change | +/-11 % max. |
| Dielectric strength | >20 kV / mm |
| Feature | halogen-free |
| Material | Silicona (VMQ) |
| Pared | Paredes finas |
| Pegamento | Sin adhesivo interior |
| Índice de contracción | 1.5 : 1 |
| Temperatura de retracción (mín.) | 80°C |
| Temperatura de funcionamiento continuo | -50 ºC a + 200 ºC |
| Resistencia a la tracción | >6.9 MPa |
| Cambio de longitud | +/-11 % max. |
| Rigidez dieléctrica | >20 kV / mm |
| Característica | sin halógenos |
| Materiał | Silikon (VMQ) |
| Ściana | Cienkościenne |
| Klej | Bez wewnętrznego kleju |
| Współczynnik skurczu | 1.5 : 1 |
| Temperatura obkurczania (min.) | 80°C |
| Temperatura pracy ciągłej | -50 °C do + 200 °C |
| Wytrzymałość na rozciąganie | >6.9 MPa |
| Zmiana długości | +/-11 % max. |
| Wytrzymałość dielektryczna | >20 kV / mm |
| Cecha | bezhalogenowy |
| Matériau | Silicone (VMQ) |
| Paroi | à paroi mince |
| Colle | sans adhésif intérieur |
| Rapport de rétraction | 1.5 : 1 |
| Température de rétraction (min.) | 80°C |
| Température de fonctionnement continu | -50 ºC à + 200 ºC |
| Résistance à la traction | >6.9 MPa |
| Changement de longueur | +/-11 % max. |
| Rigidité diélectrique | >20 kV / mm |
| Propriété | sans halogène |
| Materiale | Silicone (VMQ) |
| Muro | A parete sottile |
| Colla | Senza adesivo interno |
| Rapporto di restringimento | 1.5 : 1 |
| Temperatura di restringimento (min.) | 80°C |
| Temperatura di esercizio continua | Da -50 ºC a + 200 ºC |
| Resistenza alla trazione | >6.9 MPa |
| Variazione della lunghezza | +/-11 % max. |
| Rigidità dielettrica | >20 kV / mm |
| Caratteristica | senza alogeni |
| المواد | سيليكون (VMQ) |
| الحائط | رقيقة الجدران |
| الغراء | بدون لاصق داخل |
| نسبة الانكماش | 1.5 : 1 |
| تقلص درجة الحرارة (دقيقة) | 80°C |
| درجة حرارة التشغيل المستمرة | -50 درجة مئوية إلى + 200 درجة مئوية |
| قوة الشد | >6.9 MPa |
| تغيير الطول | +/-11 % max. |
| قوة عازل | >20 kV / mm |
| الميزة | خالية من الهالوجين |
| 재료 | 실리콘(VMQ) |
| 벽 | 얇은 벽 |
| 접착제 | 내부 접착제가 없다 |
| 수축률 | 1.5 : 1 |
| 수축 온도(min.) | 80°C |
| 연속 작동 온도 | -50ºC ~ +200ºC |
| 인장 강도 | >6.9 MPa |
| 길이 변경 | +/-11 % max. |
| 유전체 강도 | >20 kV / mm |
| 특징 | 할로겐 없음 |
| 素材 | シリコーン（VMQ） |
| 壁 | 薄肉 |
| 接着剤 | 内側接着剤なし |
| 収縮率 | 1.5 : 1 |
| 収縮温度（最低） | 80°C |
| 連続使用温度 | -50 ºC ～ + 200 ºC |
| 引張強さ | >6.9 MPa |
| 長さの変化 | +/-11 % max. |
| 絶縁耐力 | >20 kV / mm |
| 特徴 | ハロゲンフリー |
| 材料 | 硅酮(VMQ) |
| 墙 | 薄壁的 |
| 胶合 | 无内胶 |
| 收缩率 | 1.5 : 1 |
| 收缩温度（最小值） | 80°C |
| 连续工作温度 | -50°C至+200°C |
| 抗拉强度 | >6.9 MPa |
| 长度变化 | +/-11 % max. |
| 介电强度 | >20 kV / mm |
| 特征 | 无卤素 |
| Materiál? | Silikon (VMQ) |
| Zdi? | Tenkostěnná |
| Plepidlo? | Bez vnitřního lepidla |
| Poměr smršťování | 1.5 : 1 |
| Teplota smršťování (min.) | 80°C |
| Kontinuální provozní teplota | -50°C až +200°C |
| Pevnost v tahu | >6.9 MPa |
| Změna délky | +/-11 % max. |
| Dielektrická pevnost | >20 kV / mm |
| Funkce? | Bez halogenu |
| Material | Silicone (VMQ) |
| Parede | Paredes finas |
| Cola | Sem adesivo interior |
| Rácio de retração | 1.5 : 1 |
| Temperatura de retração (min.) | 80°C |
| Temperatura de funcionamento contínuo | -50 ºC a + 200 ºC |
| Resistência à tração | >6.9 MPa |
| Alteração do comprimento | +/-11 % max. |
| Resistência dieléctrica | >20 kV / mm |
| Característica | sem halogéneos |
| Материал | Силикон (VMQ) |
| Стена | Тонкостенные |
| Клей | Без внутреннего клея |
| Коэффициент усадки | 1.5 : 1 |
| Температура усадки (мин.) | 80°C |
| Непрерывная рабочая температура | от -50 ºC до + 200 ºC |
| Прочность на разрыв | >6.9 MPa |
| Изменение длины | +/-11 % max. |
| Диэлектрическая прочность | >20 kV / mm |
| Характеристика | без галогенов |
| Malzeme | Silikon (VMQ) |
| Duvarlar | Ince duvarlı |
| Tutkal | İç yapıştırıcı olmadan |
| Büzülme oranı | 1.5 : 1 |
| Sıcaklık daralma (min.) | 80°C |
| Sürekli çalışma sıcaklığı | -50 ila 200 ° C |
| Çekme mukavemeti | >6.9 MPa |
| Uzun değişikliği | +/-11 % max. |
| Dielektrik mukavemet | >20 kV / mm |
| Özellik | Halojensiz |
| AZ ANYAK | Ilikon () |
| Minden | Vágfalú |
| Lue | Belső ragasztóanyag nélkül |
| Hrinkage arány | 1.5 : 1 |
| Hrink hőmérséklete (minimum) | 80°C |
| A folyamatos üzemi hőmérséklet | -50º-+200º-től |
| Szilára erősség | >6.9 MPa |
| Hosszúsági változás | +/-11 % max. |
| IElectric erősség | >20 kV / mm |
| Eature | Halogénmentes |
| مواد | سیلیکون (VMQ) |
| دیوار | دیواره نازک |
| چسب ؟ | بدون چسب داخلی |
| نسبت انقباض | 1.5 : 1 |
| دمای کوچک شدن (دقیق) | 80°C |
| دمای کار مداوم | -50 درجه سانتیگراد تا 200 درجه سانتیگراد |
| مقاومت کششی | >6.9 MPa |
| تغییر طول | +/-11 % max. |
| مقاومت دی الکتریک | >20 kV / mm |
| ویژگی ها | بدون هالوژن |
| Materiaal | Silicone (VMQ) |
| Muur | Dunwandig |
| Lijm | Zonder lijm aan de binnenkant |
| Krimpverhouding | 1.5 : 1 |
| Krimptemperatuur (min.) | 80°C |
| Continue bedrijfstemperatuur | -50 ºC tot + 200 ºC |
| Treksterkte | >6.9 MPa |
| Lengteverandering | +/-11 % max. |
| Diëlektrische sterkte | >20 kV / mm |
| Functie | halogeenvrij |
| Material | Silicon (VMQ) |
| Perete | Cu pereți subțiri |
| Lipici | Fără adeziv interior |
| Raportul de contracție | 1.5 : 1 |
| Temperatura de contracție (min.) | 80°C |
| Temperatura de funcționare continuă | -50 ºC până la + 200 ºC |
| Rezistența la tracțiune | >6.9 MPa |
| Schimbare de lungime | +/-11 % max. |
| Rezistența dielectrică | >20 kV / mm |
| Caracteristică | fără halogen |
| Materiaali | Silikoni (VMQ) |
| Seinä | Ohutseinäiset |
| Liima | Ilman sisäpuolen liimaa |
| Kutistumissuhde | 1.5 : 1 |
| Kutistumislämpötila (min.) | 80°C |
| Jatkuva käyttölämpötila | -50 ºC - + 200 ºC |
| Vetolujuus | >6.9 MPa |
| Pituuden muutos | +/-11 % max. |
| Dielektrinen lujuus | >20 kV / mm |
| Ominaisuus | halogeenivapaa |
| Materiál | Silikón (VMQ) |
| Stena | Tenkostenné |
| Lepidlo | Bez vnútorného lepidla |
| Pomer zmrštenia | 1.5 : 1 |
| Teplota zmršťovania (min.) | 80°C |
| Trvalá prevádzková teplota | -50 ºC až + 200 ºC |
| Pevnosť v ťahu | >6.9 MPa |
| Zmena dĺžky | +/-11 % max. |
| Dielektrická pevnosť | >20 kV / mm |
| Funkcia | bezhalogénové |
| Materiale | Silikone (VMQ) |
| Væg | Tyndvægget |
| Lim | Uden indvendigt klæbemiddel |
| Krympningsforhold | 1.5 : 1 |
| Krympetemperatur (min.) | 80°C |
| Kontinuerlig driftstemperatur | -50 ºC til + 200 ºC |
| Trækstyrke | >6.9 MPa |
| Ændring af længde | +/-11 % max. |
| Dielektrisk styrke | >20 kV / mm |
| Funktion | halogenfri |
| Υλικό | Σιλικόνη (VMQ) |
| Τοίχος | Λεπτότοιχα |
| Κόλλα | Χωρίς εσωτερική κόλλα |
| Αναλογία συρρίκνωσης | 1.5 : 1 |
| Θερμοκρασία συρρίκνωσης (min.) | 80°C |
| Συνεχής θερμοκρασία λειτουργίας | -50 ºC έως + 200 ºC |
| Αντοχή σε εφελκυσμό | >6.9 MPa |
| Αλλαγή μήκους | +/-11 % max. |
| Διηλεκτρική αντοχή | >20 kV / mm |
| Χαρακτηριστικό γνώρισμα | χωρίς αλογόνα |
| Материал | Силикон (VMQ) |
| Стена | Тънкостенни |
| Лепило | Без вътрешно лепило |
| Коефициент на свиване | 1.5 : 1 |
| Температура на свиване (мин.) | 80°C |
| Непрекъсната работна температура | -50 ºC до +200 ºC |
| Якост на опън | >6.9 MPa |
| Промяна на дължината | +/-11 % max. |
| Диелектрична якост | >20 kV / mm |
| Функции | безхалогенни |
| Material | Silikon (VMQ) |
| Vägg | Tunnväggig |
| Lim | Utan invändigt klister |
| Krympningsgrad | 1.5 : 1 |
| Krymptemperatur (min.) | 80°C |
| Kontinuerlig driftstemperatur | -50 ºC till + 200 ºC |
| Draghållfasthet | >6.9 MPa |
| Längdförändring | +/-11 % max. |
| Dielektrisk styrka | >20 kV / mm |
| Funktion | halogenfri |
| Material | Silikon (VMQ) |
| Stena | Tankostenski |
| Lepilo | Brez notranjega lepila |
| Razmerje krčenja | 1.5 : 1 |
| Temperatura krčenja (min.) | 80°C |
| Trajna delovna temperatura | -50 ºC do +200 ºC |
| Natezna trdnost | >6.9 MPa |
| Sprememba dolžine | +/-11 % max. |
| Dielektrična trdnost | >20 kV / mm |
| Funkcija | brez halogenov |
| Materjal | Silikoon (VMQ) |
| Seina | Õhukesed seinad |
| Liim | Ilma sisemise liimita |
| Kahanemise suhe | 1.5 : 1 |
| Kahanemistemperatuur (min.) | 80°C |
| Pidev töötemperatuur | -50 ºC kuni + 200 ºC |
| Tõmbetugevus | >6.9 MPa |
| Pikkuse muutus | +/-11 % max. |
| Dielektriline tugevus | >20 kV / mm |
| Funktsioon | halogeenivaba |
| Medžiaga | Silikonas (VMQ) |
| Siena | Plonasienis |
| Klijai | Be vidinių klijų |
| Susitraukimo santykis | 1.5 : 1 |
| Sutraukimo temperatūra (min.) | 80°C |
| Nuolatinė darbinė temperatūra | nuo -50 ºC iki + 200 ºC |
| Tempimo stipris | >6.9 MPa |
| Ilgio pokytis | +/-11 % max. |
| Dielektrinis stipris | >20 kV / mm |
| Funkcija | be halogenų |
| Materiāls | Silikons (VMQ) |
| Siena | Plānsienu |
| Līme | Bez iekšējās līmes |
| Saraušanās koeficients | 1.5 : 1 |
| Samazināšanas temperatūra (min.) | 80°C |
| Pastāvīgā darba temperatūra | -50 ºC līdz + 200 ºC |
| Stiepes izturība | >6.9 MPa |
| Garuma izmaiņas | +/-11 % max. |
| Dielektriskā izturība | >20 kV / mm |
| Funkcija | bezhalogēnu |
| Material | Silikon (VMQ) |
| Wandung | dünnwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 1.5 : 1 |
| Schrumpftemperatur (min.) | 80°C |
| Dauerbetriebstemperatur | -50 ºC bis + 200 ºC |
| Zugfestigkeit | >6.9 MPa |
| Längenänderung | +/-11 % max. |
| Durchschlagfestigkeit | >20 kV / mm |
| Eigenschaft | halogenfrei |
| Material | Silikon (VMQ) |
| Wandung | dünnwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 1.5 : 1 |
| Schrumpftemperatur (min.) | 80°C |
| Dauerbetriebstemperatur | -50 ºC bis + 200 ºC |
| Zugfestigkeit | >6.9 MPa |
| Längenänderung | +/-11 % max. |
| Durchschlagfestigkeit | >20 kV / mm |
| Eigenschaft | halogenfrei |
Silicone heat shrink tubing - Technical data sheet for download
For detailed information on our silicone heat shrink tubing, we offer you a comprehensive technical data sheet for download. This data sheet contains all the important technical specifications, including material composition, temperature resistance and electrical insulation properties. You will also find detailed information on the dimensions and availability of our products.
Download: Technical data sheet
Do you have any questions about our offer?
Silicone shrink tubing
Silicone shrink tubing for the protection of sensitive components
Your reliable dealer for silicone heat shrink tubing
Are you looking for a reliable distributor of silicone heat shrink tubing? Then you've come to the right place! As an experienced silicone heat shrink tubing dealer, we offer you a wide range of heat shrink tubing to meet your individual requirements. Whether for industrial applications, electronics, medical devices or the protection of sensitive components - you will find the right silicone heat shrink tubing from us.
Silicone heat shrink tubing in various sizes
We know that every project is unique. That's why we offer silicone heat shrink tubing in various sizes. Whether you need a small diameter for fine electronic components or a larger tubing for industrial applications, our range covers all needs. As a silicone heat shrink tubing dealer, we ensure that you always have the right size to hand.
Silicone heat shrink tubing for industrial applications
The protection of cables and components plays a crucial role in industry. Our flexible silicone heat shrink tubing is perfect for industrial applications. Not only does it offer excellent protection against moisture and chemicals, it is also extremely resistant to high temperatures. Rely on our experience as a silicone heat shrink tubing dealer and protect your industrial systems in the best possible way.
Silicone shrink tubing for electronics
The right protection is also essential in electronics. Our silicone shrink tubing for electronics protects sensitive components from external influences and thus ensures a longer service life for your devices. As a competent silicone heat shrink tubing dealer, we offer you products that have been specially developed for the requirements of the electronics industry.
Flexible silicone shrink tubing for medical devices
Medical devices must meet the highest standards. Our flexible silicone heat shrink tubing for medical devices easily meets these requirements. It is biocompatible, sterile and offers reliable protection for sensitive medical equipment. Rely on us as your silicone heat shrink tubing distributor and benefit from our high-quality selection.
Protecting sensitive components
Sensitive components require special protection. Our silicone shrink tubing is the ideal solution for protecting sensitive components. It protects against mechanical damage, moisture and other harmful influences. As an experienced silicone shrink sleeve dealer, we know how important it is to protect your components and therefore only offer you the best products.
Contact us today and see our extensive range of silicone heat shrink tubing for yourself. As your trusted silicone heat shrink tubing distributor, we are always on hand to help and advise you on choosing the right heat shrink tubing for your needs.
Are you looking for a reliable distributor of silicone heat shrink tubing? Then you've come to the right place! As an experienced silicone heat shrink tubing dealer, we offer you a wide range of heat shrink tubing to meet your individual requirements. Whether for industrial applications, electronics, medical devices or the protection of sensitive components - you will find the right silicone heat shrink tubing from us.
Silicone heat shrink tubing in various sizes
We know that every project is unique. That's why we offer silicone heat shrink tubing in various sizes. Whether you need a small diameter for fine electronic components or a larger tubing for industrial applications, our range covers all needs. As a silicone heat shrink tubing dealer, we ensure that you always have the right size to hand.
Silicone heat shrink tubing for industrial applications
The protection of cables and components plays a crucial role in industry. Our flexible silicone heat shrink tubing is perfect for industrial applications. Not only does it offer excellent protection against moisture and chemicals, it is also extremely resistant to high temperatures. Rely on our experience as a silicone heat shrink tubing dealer and protect your industrial systems in the best possible way.
Silicone shrink tubing for electronics
The right protection is also essential in electronics. Our silicone shrink tubing for electronics protects sensitive components from external influences and thus ensures a longer service life for your devices. As a competent silicone heat shrink tubing dealer, we offer you products that have been specially developed for the requirements of the electronics industry.
Flexible silicone shrink tubing for medical devices
Medical devices must meet the highest standards. Our flexible silicone heat shrink tubing for medical devices easily meets these requirements. It is biocompatible, sterile and offers reliable protection for sensitive medical equipment. Rely on us as your silicone heat shrink tubing distributor and benefit from our high-quality selection.
Protecting sensitive components
Sensitive components require special protection. Our silicone shrink tubing is the ideal solution for protecting sensitive components. It protects against mechanical damage, moisture and other harmful influences. As an experienced silicone shrink sleeve dealer, we know how important it is to protect your components and therefore only offer you the best products.
Contact us today and see our extensive range of silicone heat shrink tubing for yourself. As your trusted silicone heat shrink tubing distributor, we are always on hand to help and advise you on choosing the right heat shrink tubing for your needs.
What can we do for you?
Contact our product experts
What can we do for you?
Contact our product experts
Oliver Bürli
Head of Hose Technology, Sales and Product Management
Do you have any questions about:
Silicone shrink tubing
Just send us a short message and we will be happy to answer your questions by phone or e-mail.
Questions?
Write to us!
Would you like to find out more about our high-quality products?
We have a large warehouse, short delivery times and duty-free delivery!
Do not hesitate to contact us, we will be happy toadvise you personally.
Do not hesitate to contact us, we will be happy toadvise you personally.
Your contact persons
Request a callback
Would you like a personal telephone consultation?
Simply fill out the form and we will get back to you.
What are the advantages of using DC voltage transformers compared to AC voltage transformers?
Please fill out the form below to download the data sheet for this product.
What are the advantages of using DC voltage transformers compared to AC voltage transformers?
You can now click and download the PDF documents as usual.
X
Get in touch with us
Our hoses at a glance
Because the part makes the price. Just enter your email and we will send you our catalog free of charge.
Request catalog
Frequently asked questions about silicone shrink tubing
1. What are the advantages of silicone heat shrink tubing?
- High temperature resistance
- Flexibility and adaptability
- Chemical resistance
- Excellent insulation properties
- Protection against moisture and mechanical influences
2. in which sizes is silicone shrink tubing available?
Silicone heat shrink tubing is available in various sizes to meet different requirements. The diameters range from small sizes for fine electronic components to larger diameters for industrial applications.
3. how is a silicone shrink sleeve installed?
- Cut the heat-shrink tubing to the desired length.
- Slide the shrink sleeve over the component to be protected.
- Heat the shrink tubing evenly with a heat gun or similar device until it fits tightly around the component.
4. which applications is silicone heat shrink tubing suitable for?
Silicone heat shrink tubing is versatile:
- Industrial applications: Protection of cables and components
- Electronics: protection of sensitive components from external influences
- Medical devices: protection and insulation of sensitive medical equipment
- General protection: protection of sensitive components against moisture and mechanical damage
5. How do I choose the right silicone heat shrink tubing?
Consider the following factors when making your selection:
- Diameter of the component to be protected
- Temperature range of the application
- Chemical resistance and mechanical requirements
- Specific application requirements, such as biocompatibility for medical applications
