Shrink tubing medium-walled with and without internal adhesive Retailer
- Large selection of medium-wall heat-shrink tubing with and without internal adhesive
- For the electrical engineering and electronics business
- A direct line instead of a waiting loop - we are there for you
Over 60 years of experience
in the electrical engineering and electronics industry
Short delivery times
through optimized warehousing
Germany and Switzerland
Dual location strength and reliability
Medium-wall shrink tubing with and without internal adhesive in our range:
In our range you will find a variety of sizes, colors and materials that meet all industry-standard specifications and are suitable for precise applications. Each product in our range has been carefully selected to ensure the highest quality and performance.
Below you will find detailed tables with sizes and technical data for each of our hoses. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right hose for your specific requirements.
Below you will find detailed tables with sizes and technical data for each of our hoses. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right hose for your specific requirements.
Shrink tubing medium-walled with and without inner adhesive - MDT - Size chart
Shrink tubing medium wall with and without inner adhesive - MDT-A - Size chart
Medium-wall heat-shrink tubing with and without internal adhesive - MDT - Technical data
| Eigenschaft | Wert |
| Material | Polyoefin |
| Wandung | mittelwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 4.5 : 1 |
| Schrumpftemperatur(min.) | 135°C |
| Dauerbetriebstemperatur | -55ºC - 130ºC |
| Zugfestigkeit(N/mm2) | 25 |
| Bruchdehnung(%) | 600 |
| Längenänderung | -10% max. |
| Durchschlagfestigkeit | 16 kV/mm |
| Spezifischer Widerstand (Ohm x cm) | 10^13 |
| Brennbarkeit | selbstverlöschend |
| Feature | Value |
| Material | Polyoefin |
| Wall | medium-walled |
| Glue | without inside adhesive |
| Shrinkage ratio | 4.5 : 1 |
| Shrinkage temperature (min.) | 135°C |
| Continuous operating temperature | -55ºC - 130ºC |
| Tensile strength(N/mm2) | 25 |
| Elongation at break(%) | 600 |
| Length change | -10% max. |
| Dielectric strength | 16 kV/mm |
| Specific resistance (Ohm x cm) | 10^13 |
| Flammability | self-extinguishing |
| Característica | Valor |
| Material | Polioefin |
| Pared | Paredes medianas |
| Pegamento | Sin adhesivo interior |
| Índice de contracción | 4.5 : 1 |
| Temperatura de retracción (mín.) | 135°C |
| Temperatura de funcionamiento continuo | -55ºC - 130ºC |
| Resistencia a la tracción (N/mm2) | 25 |
| Alargamiento a la rotura(%) | 600 |
| Cambio de longitud | -10% max. |
| Rigidez dieléctrica | 16 kV/mm |
| Resistencia específica (Ohm x cm) | 10^13 |
| Inflamabilidad | autoextinguible |
| Cecha | Wartość |
| Materiał | Polyoefin |
| Ściana | Średniościenne |
| Klej | Bez wewnętrznego kleju |
| Współczynnik skurczu | 4.5 : 1 |
| Temperatura skurczu (min.) | 135°C |
| Temperatura pracy ciągłej | -55ºC - 130ºC |
| Wytrzymałość na rozciąganie (N/mm2) | 25 |
| Wydłużenie przy zerwaniu (%) | 600 |
| Zmiana długości | -10% max. |
| Wytrzymałość dielektryczna | 16 kV/mm |
| Opór właściwy (Ohm x cm) | 10^13 |
| Palność | samogasnący |
| Propriété | Valeur |
| Matériau | Polyoefin |
| Paroi | à paroi moyenne |
| Colle | sans adhésif intérieur |
| Rapport de rétraction | 4.5 : 1 |
| Température de rétraction (min.) | 135°C |
| Température de fonctionnement continu | -55ºC - 130ºC |
| Résistance à la traction (N/mm2) | 25 |
| Allongement à la rupture(%) | 600 |
| Changement de longueur | -10% max. |
| Rigidité diélectrique | 16 kV/mm |
| Résistance spécifique (Ohm x cm) | 10^13 |
| Inflammabilité | auto-extinguible |
| Caratteristica | Valore |
| Materiale | Polinefrina |
| Muro | A parete media |
| Colla | Senza adesivo interno |
| Rapporto di restringimento | 4.5 : 1 |
| Temperatura di restringimento (min.) | 135°C |
| Temperatura di esercizio continua | -55ºC - 130ºC |
| Resistenza alla trazione (N/mm2) | 25 |
| Allungamento a rottura (%) | 600 |
| Variazione della lunghezza | -10% max. |
| Rigidità dielettrica | 16 kV/mm |
| Resistenza specifica (Ohm x cm) | 10^13 |
| Infiammabilità | autoestinguente |
| الميزة | القيمة |
| المواد | البوليفينات |
| الحائط | متوسطة الجدران |
| الغراء | بدون لاصق داخل |
| نسبة الانكماش | 4.5 : 1 |
| درجة حرارة الانكماش (دقيقة) | 135°C |
| درجة حرارة التشغيل المستمرة | -55ºC - 130ºC |
| قوة الشد (N/mm2) | 25 |
| استطالة عند الكسر (٪) | 600 |
| تغيير الطول | -10% max. |
| قوة عازل | 16 kV/mm |
| مقاومة محددة (أوم × سم) | 10^13 |
| قابلية للاشتعال | إطفاء ذاتي |
| 특징 | 값 |
| 재료 | 폴리에핀 |
| 벽 | 중간 벽 |
| 접착제 | 내부 접착제가 없다 |
| 수축률 | 4.5 : 1 |
| 수축 온도(min.) | 135°C |
| 연속 작동 온도 | -55ºC - 130ºC |
| 인장 강도(N/mm2) | 25 |
| 파손시 신장(%) | 600 |
| 길이 변경 | -10% max. |
| 유전체 강도 | 16 kV/mm |
| 비저항 (Ohm x cm) | 10^13 |
| 가연성 | 자기 소화 |
| 特徴 | 価値 |
| 素材 | ポリオフィン |
| 壁 | 中肉 |
| 接着剤 | 内側接着剤なし |
| 収縮率 | 4.5 : 1 |
| 収縮温度（最低） | 135°C |
| 連続使用温度 | -55ºC - 130ºC |
| 引張強さ (N/mm2) | 25 |
| 破断伸度(%) | 600 |
| 長さの変化 | -10% max. |
| 絶縁耐力 | 16 kV/mm |
| 比抵抗（オーム×cm） | 10^13 |
| 引火性 | 自己消火性 |
| 特征 | 价值 |
| 材料 | 聚烯烃 |
| 墙 | 中壁的 |
| 胶合 | 无内胶 |
| 收缩率 | 4.5 : 1 |
| 收缩温度（最小值） | 135°C |
| 连续工作温度 | -55ºC - 130ºC |
| 抗拉强度(N/mm2) | 25 |
| 断裂伸长率（%） | 600 |
| 长度变化 | -10% max. |
| 介电强度 | 16 kV/mm |
| 比电阻（欧姆×厘米） | 10^13 |
| 易燃性 | 自熄的 |
| Funkce? | Hodnota? |
| Materiál? | Polyofiny |
| Zdi? | Střední stěna |
| Plepidlo? | Bez vnitřního lepidla |
| Poměr smršťování | 4.5 : 1 |
| Teplota smršťování (min.) | 135°C |
| Kontinuální provozní teplota | -55ºC - 130ºC |
| Pevnost v tahu (N/mm2) | 25 |
| Prodloužení při přerušení (%) | 600 |
| Změna délky | -10% max. |
| Dielektrická pevnost | 16 kV/mm |
| Specifický odpor (Ohm x cm) | 10^13 |
| Hořlavost? | Samočinné vyhasení |
| Característica | Valor |
| Material | Polioefin |
| Parede | Paredes médias |
| Cola | Sem adesivo interior |
| Rácio de retração | 4.5 : 1 |
| Temperatura de retração (min.) | 135°C |
| Temperatura de funcionamento contínuo | -55ºC - 130ºC |
| Resistência à tração (N/mm2) | 25 |
| Alongamento de rotura (%) | 600 |
| Alteração do comprimento | -10% max. |
| Resistência dieléctrica | 16 kV/mm |
| Resistência específica (Ohm x cm) | 10^13 |
| Inflamabilidade | auto-extinguível |
| Характеристика | Значение |
| Материал | Polyoefin |
| Стена | Среднестенные |
| Клей | Без внутреннего клея |
| Коэффициент усадки | 4.5 : 1 |
| Температура усадки (мин.) | 135°C |
| Непрерывная рабочая температура | -55ºC - 130ºC |
| Прочность на разрыв (Н/мм2) | 25 |
| Удлинение при разрыве (%) | 600 |
| Изменение длины | -10% max. |
| Диэлектрическая прочность | 16 kV/mm |
| Удельное сопротивление (Ом х см) | 10^13 |
| Воспламеняемость | Самозатухающий |
| Özellik | Değer |
| Malzeme | Poliofin |
| Duvarlar | Orta duvarlı |
| Tutkal | İç yapıştırıcı olmadan |
| Büzülme oranı | 4.5 : 1 |
| Büzülme sıcaklığı (min.) | 135°C |
| Sürekli çalışma sıcaklığı | -55ºC - 130ºC |
| Çekme mukavemeti (N/mm2) | 25 |
| Kırılma uzaması (%) | 600 |
| Uzun değişikliği | -10% max. |
| Dielektrik mukavemet | 16 kV/mm |
| Spesifik direnç (Ohm x cm) | 10^13 |
| Yanıcılık mı? | Kendi kendini söndürme |
| Eature | AlueCity in Alberta Canada |
| AZ ANYAK | Olioefin |
| Minden | Középfalú |
| Lue | Belső ragasztóanyag nélkül |
| Hrinkage arány | 4.5 : 1 |
| Hrinkage hőmérséklet (minimum) | 135°C |
| A folyamatos üzemi hőmérséklet | -55ºC - 130ºC |
| Szilószilársőség (/mm2) | 25 |
| Hosszúság szünetelés (%) | 600 |
| Hosszúsági változás | -10% max. |
| IElectric erősség | 16 kV/mm |
| Speciális rezisztencia (hm x cm) | 10^13 |
| Felhúzódási képesség | Öntöltő |
| ویژگی ها | ارزش |
| مواد | پلی فین |
| دیوار | دیواره متوسط |
| چسب ؟ | بدون چسب داخلی |
| نسبت انقباض | 4.5 : 1 |
| دمای انقباض (دقیق) | 135°C |
| دمای کار مداوم | -55ºC - 130ºC |
| مقاومت کششی (N/mm2) | 25 |
| کشیدگی در زمان شکستن (٪) | 600 |
| تغییر طول | -10% max. |
| مقاومت دی الکتریک | 16 kV/mm |
| مقاومت خاص (اهم × سانتی متر) | 10^13 |
| قابل اشتعال | خودخاموش کردن |
| Functie | Waarde |
| Materiaal | Polyoefin |
| Muur | Middelwandig |
| Lijm | Zonder lijm aan de binnenkant |
| Krimpverhouding | 4.5 : 1 |
| Krimptemperatuur (min.) | 135°C |
| Continue bedrijfstemperatuur | -55ºC - 130ºC |
| Treksterkte (N/mm2) | 25 |
| Rek bij breuk (%) | 600 |
| Lengteverandering | -10% max. |
| Diëlektrische sterkte | 16 kV/mm |
| Specifieke weerstand (Ohm x cm) | 10^13 |
| Ontvlambaarheid | zelfdovend |
| Caracteristică | Valoare |
| Material | Polyoefin |
| Perete | Cu pereți medii |
| Lipici | Fără adeziv interior |
| Raportul de contracție | 4.5 : 1 |
| Temperatura de contracție (min.) | 135°C |
| Temperatura de funcționare continuă | -55ºC - 130ºC |
| Rezistența la tracțiune (N/mm2) | 25 |
| Alungirea la rupere (%) | 600 |
| Schimbare de lungime | -10% max. |
| Rezistența dielectrică | 16 kV/mm |
| Rezistența specifică (Ohm x cm) | 10^13 |
| Inflamabilitate | autoextincție |
| Ominaisuus | Arvo |
| Materiaali | Polyoefin |
| Seinä | Keskiseinäiset |
| Liima | Ilman sisäpuolen liimaa |
| Kutistumissuhde | 4.5 : 1 |
| Kutistumislämpötila (min.) | 135°C |
| Jatkuva käyttölämpötila | -55ºC - 130ºC |
| Vetolujuus (N/mm2) | 25 |
| Murtovenymä (%) | 600 |
| Pituuden muutos | -10% max. |
| Dielektrinen lujuus | 16 kV/mm |
| Ominaisvastus (Ohm x cm) | 10^13 |
| Syttyvyys | itsestään sammuva |
| Funkcia | Hodnota |
| Materiál | Polyoefin |
| Stena | Stredne stenové |
| Lepidlo | Bez vnútorného lepidla |
| Pomer zmrštenia | 4.5 : 1 |
| Teplota zmrštenia (min.) | 135°C |
| Trvalá prevádzková teplota | -55ºC - 130ºC |
| Pevnosť v ťahu (N/mm2) | 25 |
| Predĺženie pri pretrhnutí (%) | 600 |
| Zmena dĺžky | -10% max. |
| Dielektrická pevnosť | 16 kV/mm |
| Špecifický odpor (Ohm x cm) | 10^13 |
| Horľavosť | samozhášacie |
| Funktion | Værdi |
| Materiale | Polyoefin |
| Væg | Mellemvægge |
| Lim | Uden indvendigt klæbemiddel |
| Krympningsgrad | 4.5 : 1 |
| Krympetemperatur (min.) | 135°C |
| Kontinuerlig driftstemperatur | -55ºC - 130ºC |
| Trækstyrke (N/mm2) | 25 |
| Forlængelse ved brud (%) | 600 |
| Ændring af længde | -10% max. |
| Dielektrisk styrke | 16 kV/mm |
| Specifik modstand (Ohm x cm) | 10^13 |
| Brandfarlighed | selvslukkende |
| Χαρακτηριστικό γνώρισμα | Αξία |
| Υλικό | Polyoefin |
| Τοίχος | Μεσαίου τοιχώματος |
| Κόλλα | Χωρίς εσωτερική κόλλα |
| Αναλογία συρρίκνωσης | 4.5 : 1 |
| Θερμοκρασία συρρίκνωσης (min.) | 135°C |
| Συνεχής θερμοκρασία λειτουργίας | -55ºC - 130ºC |
| Αντοχή σε εφελκυσμό (N/mm2) | 25 |
| Επιμήκυνση κατά τη θραύση (%) | 600 |
| Αλλαγή μήκους | -10% max. |
| Διηλεκτρική αντοχή | 16 kV/mm |
| Ειδική αντίσταση (Ohm x cm) | 10^13 |
| Αναφλεξιμότητα | αυτοσβενόμενο |
| Функции | Стойност |
| Материал | Polyoefin |
| Стена | Средностенни |
| Лепило | Без вътрешно лепило |
| Коефициент на свиване | 4.5 : 1 |
| Температура на свиване (мин.) | 135°C |
| Непрекъсната работна температура | -55ºC - 130ºC |
| Якост на опън (N/mm2) | 25 |
| Удължение при скъсване (%) | 600 |
| Промяна на дължината | -10% max. |
| Диелектрична якост | 16 kV/mm |
| Специфично съпротивление (Ohm x cm) | 10^13 |
| Запалимост | самозагасващ се |
| Funktion | Värde |
| Material | Polyoefin |
| Vägg | Medelhöga väggar |
| Lim | Utan självhäftande insida |
| Krympningsgrad | 4.5 : 1 |
| Krympningstemperatur (min.) | 135°C |
| Kontinuerlig driftstemperatur | -55ºC - 130ºC |
| Draghållfasthet (N/mm2) | 25 |
| Töjning vid brott (%) | 600 |
| Längdförändring | -10% max. |
| Dielektrisk hållfasthet | 16 kV/mm |
| Specifikt motstånd (Ohm x cm) | 10^13 |
| Brandfarlighet | självsläckande |
| Funkcija | Vrednost |
| Material | Polioefin |
| Stena | Srednje stene |
| Lepilo | Brez notranjega lepila |
| Razmerje krčenja | 4.5 : 1 |
| Temperatura krčenja (min.) | 135°C |
| Trajna delovna temperatura | -55ºC - 130ºC |
| Natezna trdnost (N/mm2) | 25 |
| Podaljšek pri pretrgu (%) | 600 |
| Sprememba dolžine | -10% max. |
| Dielektrična trdnost | 16 kV/mm |
| Specifična upornost (Ohm x cm) | 10^13 |
| Vnetljivost | samougasljivi |
| Funktsioon | Väärtus |
| Materjal | Polyoefin |
| Seina | Keskmise seinaga |
| Liim | Ilma sisemise liimita |
| Kahanemise suhe | 4.5 : 1 |
| Kahanemistemperatuur (min.) | 135°C |
| Pidev töötemperatuur | -55ºC - 130ºC |
| Tõmbetugevus (N/mm2) | 25 |
| Pikendus murdumisel (%) | 600 |
| Pikkuse muutus | -10% max. |
| Dielektriline tugevus | 16 kV/mm |
| Eritakistus (Ohm x cm) | 10^13 |
| Põletatavus | isekustuv |
| Funkcija | Vertė |
| Medžiaga | Polioefinas |
| Siena | Vidutinių sienelių |
| Klijai | Be vidinių klijų |
| Susitraukimo santykis | 4.5 : 1 |
| Susitraukimo temperatūra (min.) | 135°C |
| Nuolatinė darbinė temperatūra | -55ºC - 130ºC |
| Tempimo stipris (N/mm2) | 25 |
| Pailgėjimas nutrūkus (%) | 600 |
| Ilgio pokytis | -10% max. |
| Dielektrinis stipris | 16 kV/mm |
| Savitoji varža (Ohm x cm) | 10^13 |
| Degumas | savaime užgęstantis |
| Funkcija | Vērtība |
| Materiāls | Polyoefin |
| Siena | Vidējas sieniņas |
| Līme | Bez iekšējās līmes |
| Saraušanās koeficients | 4.5 : 1 |
| Termiskās saraušanās temperatūra (min.) | 135°C |
| Pastāvīgā darba temperatūra | -55ºC - 130ºC |
| Stiepes izturība (N/mm2) | 25 |
| Pagarinājums pārraušanas brīdī (%) | 600 |
| Garuma izmaiņas | -10% max. |
| Dielektriskā izturība | 16 kV/mm |
| Īpatnējā pretestība (Ohm x cm) | 10^13 |
| Uzliesmojamība | pašdzēsošs |
| Eigenschaft | Wert |
| Material | Polyoefin |
| Wandung | mittelwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 4.5 : 1 |
| Schrumpftemperatur(min.) | 135°C |
| Dauerbetriebstemperatur | -55ºC - 130ºC |
| Zugfestigkeit(N/mm2) | 25 |
| Bruchdehnung(%) | 600 |
| Längenänderung | -10% max. |
| Durchschlagfestigkeit | 16 kV/mm |
| Spezifischer Widerstand (Ohm x cm) | 10^13 |
| Brennbarkeit | selbstverlöschend |
| Eigenschaft | Wert |
| Material | Polyoefin |
| Wandung | mittelwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 4.5 : 1 |
| Schrumpftemperatur(min.) | 135°C |
| Dauerbetriebstemperatur | -55ºC - 130ºC |
| Zugfestigkeit(N/mm2) | 25 |
| Bruchdehnung(%) | 600 |
| Längenänderung | -10% max. |
| Durchschlagfestigkeit | 16 kV/mm |
| Spezifischer Widerstand (Ohm x cm) | 10^13 |
| Brennbarkeit | selbstverlöschend |
Medium-wall heat-shrink tubing with and without internal adhesive - MDT-A - Technical data
| Eigenschaft | Wert |
| Material | Polyoefin |
| Wandung | mittelwandig |
| Kleber | mit Innenkleber |
| Schrumpfverhältnis | 4.5:1 |
| Schrumpftemperatur(min.) | 135°C |
| Dauerbetriebstemperatur | -55ºC - 130ºC |
| Zugfestigkeit(N/mm2) | 22 |
| Bruchdehnung(%) | 650 |
| Längenänderung | -10% max. |
| Durchschlagfestigkeit | 16 kV/mm |
| Spezifischer Widerstand (Ohm x cm) | 10^13 |
| Brennbarkeit | nicht selbstverlöschend |
| Feature | Value |
| Material | Polyoefin |
| Wall | medium-walled |
| Glue | with inside adhesive |
| Shrinkage ratio | 4.5:1 |
| Shrinkage temperature (min.) | 135°C |
| Continuous operating temperature | -55ºC - 130ºC |
| Tensile strength(N/mm2) | 22 |
| Elongation at break(%) | 650 |
| Length change | -10% max. |
| Dielectric strength | 16 kV/mm |
| Specific resistance (Ohm x cm) | 10^13 |
| Flammability | not self-extinguishing |
| Característica | Valor |
| Material | Polioefin |
| Pared | Paredes medianas |
| Pegamento | con adhesivo interno |
| Índice de contracción | 4.5:1 |
| Temperatura de retracción (mín.) | 135°C |
| Temperatura de funcionamiento continuo | -55ºC - 130ºC |
| Resistencia a la tracción (N/mm2) | 22 |
| Alargamiento a la rotura(%) | 650 |
| Cambio de longitud | -10% max. |
| Rigidez dieléctrica | 16 kV/mm |
| Resistencia específica (Ohm x cm) | 10^13 |
| Inflamabilidad | No autoextinguible |
| Cecha | Wartość |
| Materiał | Polyoefin |
| Ściana | Średniościenne |
| Klej | z wewnętrznym klejem |
| Współczynnik skurczu | 4.5:1 |
| Temperatura skurczu (min.) | 135°C |
| Temperatura pracy ciągłej | -55ºC - 130ºC |
| Wytrzymałość na rozciąganie (N/mm2) | 22 |
| Wydłużenie przy zerwaniu (%) | 650 |
| Zmiana długości | -10% max. |
| Wytrzymałość dielektryczna | 16 kV/mm |
| Opór właściwy (Ohm x cm) | 10^13 |
| Palność | Nie jest samogasnący |
| Propriété | Valeur |
| Matériau | Polyoefin |
| Paroi | à paroi moyenne |
| Colle | avec adhésif intérieur |
| Rapport de rétraction | 4.5:1 |
| Température de rétraction (min.) | 135°C |
| Température de fonctionnement continu | -55ºC - 130ºC |
| Résistance à la traction (N/mm2) | 22 |
| Allongement à la rupture(%) | 650 |
| Changement de longueur | -10% max. |
| Rigidité diélectrique | 16 kV/mm |
| Résistance spécifique (Ohm x cm) | 10^13 |
| Inflammabilité | non auto-extinguible |
| Caratteristica | Valore |
| Materiale | Polinefrina |
| Muro | A parete media |
| Colla | con adesivo interno |
| Rapporto di restringimento | 4.5:1 |
| Temperatura di restringimento (min.) | 135°C |
| Temperatura di esercizio continua | -55ºC - 130ºC |
| Resistenza alla trazione (N/mm2) | 22 |
| Allungamento a rottura (%) | 650 |
| Variazione della lunghezza | -10% max. |
| Rigidità dielettrica | 16 kV/mm |
| Resistenza specifica (Ohm x cm) | 10^13 |
| Infiammabilità | Non autoestinguente |
| الميزة | القيمة |
| المواد | البوليفينات |
| الحائط | متوسطة الجدران |
| الغراء | مع لاصق داخل |
| نسبة الانكماش | 4.5:1 |
| درجة حرارة الانكماش (دقيقة) | 135°C |
| درجة حرارة التشغيل المستمرة | -55ºC - 130ºC |
| قوة الشد (N/mm2) | 22 |
| استطالة عند الكسر (٪) | 650 |
| تغيير الطول | -10% max. |
| قوة عازل | 16 kV/mm |
| مقاومة محددة (أوم × سم) | 10^13 |
| قابلية للاشتعال | لا إطفاء ذاتي |
| 특징 | 값 |
| 재료 | 폴리에핀 |
| 벽 | 중간 벽 |
| 접착제 | 내부 접착제가 있습니다. |
| 수축률 | 4.5:1 |
| 수축 온도(min.) | 135°C |
| 연속 작동 온도 | -55ºC - 130ºC |
| 인장 강도(N/mm2) | 22 |
| 파손시 신장(%) | 650 |
| 길이 변경 | -10% max. |
| 유전체 강도 | 16 kV/mm |
| 비저항 (Ohm x cm) | 10^13 |
| 가연성 | 자기 꺼지지 않다 |
| 特徴 | 価値 |
| 素材 | ポリオフィン |
| 壁 | 中肉 |
| 接着剤 | 内部接着剤付き |
| 収縮率 | 4.5:1 |
| 収縮温度（最低） | 135°C |
| 連続使用温度 | -55ºC - 130ºC |
| 引張強さ (N/mm2) | 22 |
| 破断伸度(%) | 650 |
| 長さの変化 | -10% max. |
| 絶縁耐力 | 16 kV/mm |
| 比抵抗（オーム×cm） | 10^13 |
| 引火性 | 自己消火性はない |
| 特征 | 价值 |
| 材料 | 聚烯烃 |
| 墙 | 中壁的 |
| 胶合 | 带内胶 |
| 收缩率 | 4.5:1 |
| 收缩温度（最小值） | 135°C |
| 连续工作温度 | -55ºC - 130ºC |
| 抗拉强度(N/mm2) | 22 |
| 断裂伸长率（%） | 650 |
| 长度变化 | -10% max. |
| 介电强度 | 16 kV/mm |
| 比电阻（欧姆×厘米） | 10^13 |
| 易燃性 | 不自熄的 |
| Funkce? | Hodnota? |
| Materiál? | Polyofiny |
| Zdi? | Střední stěna |
| Plepidlo? | Vnitřní lepidlo |
| Poměr smršťování | 4.5:1 |
| Teplota smršťování (min.) | 135°C |
| Kontinuální provozní teplota | -55ºC - 130ºC |
| Pevnost v tahu (N/mm2) | 22 |
| Prodloužení při přerušení (%) | 650 |
| Změna délky | -10% max. |
| Dielektrická pevnost | 16 kV/mm |
| Specifický odpor (Ohm x cm) | 10^13 |
| Hořlavost? | Ne samočinně zhasací |
| Característica | Valor |
| Material | Polioefin |
| Parede | Paredes médias |
| Cola | com adesivo interno |
| Rácio de retração | 4.5:1 |
| Temperatura de retração (min.) | 135°C |
| Temperatura de funcionamento contínuo | -55ºC - 130ºC |
| Resistência à tração (N/mm2) | 22 |
| Alongamento de rotura (%) | 650 |
| Alteração do comprimento | -10% max. |
| Resistência dieléctrica | 16 kV/mm |
| Resistência específica (Ohm x cm) | 10^13 |
| Inflamabilidade | Não auto-extinguível |
| Характеристика | Значение |
| Материал | Polyoefin |
| Стена | Среднестенные |
| Клей | с внутренним клеем |
| Коэффициент усадки | 4.5:1 |
| Температура усадки (мин.) | 135°C |
| Непрерывная рабочая температура | -55ºC - 130ºC |
| Прочность на разрыв (Н/мм2) | 22 |
| Удлинение при разрыве (%) | 650 |
| Изменение длины | -10% max. |
| Диэлектрическая прочность | 16 kV/mm |
| Удельное сопротивление (Ом х см) | 10^13 |
| Воспламеняемость | Не самозатухающий |
| Özellik | Değer |
| Malzeme | Poliofin |
| Duvarlar | Orta duvarlı |
| Tutkal | İç yapıştırıcı ile |
| Büzülme oranı | 4.5:1 |
| Büzülme sıcaklığı (min.) | 135°C |
| Sürekli çalışma sıcaklığı | -55ºC - 130ºC |
| Çekme mukavemeti (N/mm2) | 22 |
| Kırılma uzaması (%) | 650 |
| Uzun değişikliği | -10% max. |
| Dielektrik mukavemet | 16 kV/mm |
| Spesifik direnç (Ohm x cm) | 10^13 |
| Yanıcılık mı? | Kendi kendini söndürmez |
| Eature | AlueCity in Alberta Canada |
| AZ ANYAK | Olioefin |
| Minden | Középfalú |
| Lue | Belső ragasztóval |
| Hrinkage arány | 4.5:1 |
| Hrinkage hőmérséklet (minimum) | 135°C |
| A folyamatos üzemi hőmérséklet | -55ºC - 130ºC |
| Szilószilársőség (/mm2) | 22 |
| Hosszúság szünetelés (%) | 650 |
| Hosszúsági változás | -10% max. |
| IElectric erősség | 16 kV/mm |
| Speciális rezisztencia (hm x cm) | 10^13 |
| Felhúzódási képesség | Nem öntötő |
| ویژگی ها | ارزش |
| مواد | پلی فین |
| دیوار | دیواره متوسط |
| چسب ؟ | با چسب داخلی |
| نسبت انقباض | 4.5:1 |
| دمای انقباض (دقیق) | 135°C |
| دمای کار مداوم | -55ºC - 130ºC |
| مقاومت کششی (N/mm2) | 22 |
| کشیدگی در زمان شکستن (٪) | 650 |
| تغییر طول | -10% max. |
| مقاومت دی الکتریک | 16 kV/mm |
| مقاومت خاص (اهم × سانتی متر) | 10^13 |
| قابل اشتعال | خودخاموش نشده |
| Functie | Waarde |
| Materiaal | Polyoefin |
| Muur | Middelwandig |
| Lijm | met interne lijm |
| Krimpverhouding | 4.5:1 |
| Krimptemperatuur (min.) | 135°C |
| Continue bedrijfstemperatuur | -55ºC - 130ºC |
| Treksterkte (N/mm2) | 22 |
| Rek bij breuk (%) | 650 |
| Lengteverandering | -10% max. |
| Diëlektrische sterkte | 16 kV/mm |
| Specifieke weerstand (Ohm x cm) | 10^13 |
| Ontvlambaarheid | Niet zelfdovend |
| Caracteristică | Valoare |
| Material | Polyoefin |
| Perete | Cu pereți medii |
| Lipici | cu adeziv intern |
| Raportul de contracție | 4.5:1 |
| Temperatura de contracție (min.) | 135°C |
| Temperatura de funcționare continuă | -55ºC - 130ºC |
| Rezistența la tracțiune (N/mm2) | 22 |
| Alungirea la rupere (%) | 650 |
| Schimbare de lungime | -10% max. |
| Rezistența dielectrică | 16 kV/mm |
| Rezistența specifică (Ohm x cm) | 10^13 |
| Inflamabilitate | Nu se stinge singur |
| Ominaisuus | Arvo |
| Materiaali | Polyoefin |
| Seinä | Keskiseinäiset |
| Liima | sisäisellä liimalla |
| Kutistumissuhde | 4.5:1 |
| Kutistumislämpötila (min.) | 135°C |
| Jatkuva käyttölämpötila | -55ºC - 130ºC |
| Vetolujuus (N/mm2) | 22 |
| Murtovenymä (%) | 650 |
| Pituuden muutos | -10% max. |
| Dielektrinen lujuus | 16 kV/mm |
| Ominaisvastus (Ohm x cm) | 10^13 |
| Syttyvyys | Ei itsestään sammuva |
| Funkcia | Hodnota |
| Materiál | Polyoefin |
| Stena | Stredne stenové |
| Lepidlo | s vnútorným lepidlom |
| Pomer zmrštenia | 4.5:1 |
| Teplota zmrštenia (min.) | 135°C |
| Trvalá prevádzková teplota | -55ºC - 130ºC |
| Pevnosť v ťahu (N/mm2) | 22 |
| Predĺženie pri pretrhnutí (%) | 650 |
| Zmena dĺžky | -10% max. |
| Dielektrická pevnosť | 16 kV/mm |
| Špecifický odpor (Ohm x cm) | 10^13 |
| Horľavosť | Nie je samozhášací |
| Funktion | Værdi |
| Materiale | Polyoefin |
| Væg | Mellemvægge |
| Lim | med indvendigt klæbemiddel |
| Krympningsgrad | 4.5:1 |
| Krympetemperatur (min.) | 135°C |
| Kontinuerlig driftstemperatur | -55ºC - 130ºC |
| Trækstyrke (N/mm2) | 22 |
| Forlængelse ved brud (%) | 650 |
| Ændring af længde | -10% max. |
| Dielektrisk styrke | 16 kV/mm |
| Specifik modstand (Ohm x cm) | 10^13 |
| Brandfarlighed | Ikke selvslukkende |
| Χαρακτηριστικό γνώρισμα | Αξία |
| Υλικό | Polyoefin |
| Τοίχος | Μεσαίου τοιχώματος |
| Κόλλα | με εσωτερική κόλλα |
| Αναλογία συρρίκνωσης | 4.5:1 |
| Θερμοκρασία συρρίκνωσης (min.) | 135°C |
| Συνεχής θερμοκρασία λειτουργίας | -55ºC - 130ºC |
| Αντοχή σε εφελκυσμό (N/mm2) | 22 |
| Επιμήκυνση κατά τη θραύση (%) | 650 |
| Αλλαγή μήκους | -10% max. |
| Διηλεκτρική αντοχή | 16 kV/mm |
| Ειδική αντίσταση (Ohm x cm) | 10^13 |
| Αναφλεξιμότητα | Δεν είναι αυτοσβενόμενο |
| Функции | Стойност |
| Материал | Polyoefin |
| Стена | Средностенни |
| Лепило | с вътрешно лепило |
| Коефициент на свиване | 4.5:1 |
| Температура на свиване (мин.) | 135°C |
| Непрекъсната работна температура | -55ºC - 130ºC |
| Якост на опън (N/mm2) | 22 |
| Удължение при скъсване (%) | 650 |
| Промяна на дължината | -10% max. |
| Диелектрична якост | 16 kV/mm |
| Специфично съпротивление (Ohm x cm) | 10^13 |
| Запалимост | Не е самозагасващ се |
| Funktion | Värde |
| Material | Polyoefin |
| Vägg | Medelhöga väggar |
| Lim | med invändigt häftämne |
| Krympningsgrad | 4.5:1 |
| Krympningstemperatur (min.) | 135°C |
| Kontinuerlig driftstemperatur | -55ºC - 130ºC |
| Draghållfasthet (N/mm2) | 22 |
| Töjning vid brott (%) | 650 |
| Längdförändring | -10% max. |
| Dielektrisk hållfasthet | 16 kV/mm |
| Specifikt motstånd (Ohm x cm) | 10^13 |
| Brandfarlighet | Inte självslocknande |
| Funkcija | Vrednost |
| Material | Polioefin |
| Stena | Srednje stene |
| Lepilo | z notranjim lepilom |
| Razmerje krčenja | 4.5:1 |
| Temperatura krčenja (min.) | 135°C |
| Trajna delovna temperatura | -55ºC - 130ºC |
| Natezna trdnost (N/mm2) | 22 |
| Podaljšek pri pretrgu (%) | 650 |
| Sprememba dolžine | -10% max. |
| Dielektrična trdnost | 16 kV/mm |
| Specifična upornost (Ohm x cm) | 10^13 |
| Vnetljivost | Ni samougasljiv |
| Funktsioon | Väärtus |
| Materjal | Polyoefin |
| Seina | Keskmise seinaga |
| Liim | sisemise liimiga |
| Kahanemise suhe | 4.5:1 |
| Kahanemistemperatuur (min.) | 135°C |
| Pidev töötemperatuur | -55ºC - 130ºC |
| Tõmbetugevus (N/mm2) | 22 |
| Pikendus murdumisel (%) | 650 |
| Pikkuse muutus | -10% max. |
| Dielektriline tugevus | 16 kV/mm |
| Eritakistus (Ohm x cm) | 10^13 |
| Põletatavus | Ei ole isekustuv |
| Funkcija | Vertė |
| Medžiaga | Polioefinas |
| Siena | Vidutinių sienelių |
| Klijai | su vidiniais klijais |
| Susitraukimo santykis | 4.5:1 |
| Susitraukimo temperatūra (min.) | 135°C |
| Nuolatinė darbinė temperatūra | -55ºC - 130ºC |
| Tempimo stipris (N/mm2) | 22 |
| Pailgėjimas nutrūkus (%) | 650 |
| Ilgio pokytis | -10% max. |
| Dielektrinis stipris | 16 kV/mm |
| Savitoji varža (Ohm x cm) | 10^13 |
| Degumas | Ne savaime neužsidegantis |
| Funkcija | Vērtība |
| Materiāls | Polyoefin |
| Siena | Vidējas sieniņas |
| Līme | ar iekšējo līmi |
| Saraušanās koeficients | 4.5:1 |
| Termiskās saraušanās temperatūra (min.) | 135°C |
| Pastāvīgā darba temperatūra | -55ºC - 130ºC |
| Stiepes izturība (N/mm2) | 22 |
| Pagarinājums pārraušanas brīdī (%) | 650 |
| Garuma izmaiņas | -10% max. |
| Dielektriskā izturība | 16 kV/mm |
| Īpatnējā pretestība (Ohm x cm) | 10^13 |
| Uzliesmojamība | Nav pašdzēsošs |
| Eigenschaft | Wert |
| Material | Polyoefin |
| Wandung | mittelwandig |
| Kleber | mit Innenkleber |
| Schrumpfverhältnis | 4.5:1 |
| Schrumpftemperatur(min.) | 135°C |
| Dauerbetriebstemperatur | -55ºC - 130ºC |
| Zugfestigkeit(N/mm2) | 22 |
| Bruchdehnung(%) | 650 |
| Längenänderung | -10% max. |
| Durchschlagfestigkeit | 16 kV/mm |
| Spezifischer Widerstand (Ohm x cm) | 10^13 |
| Brennbarkeit | nicht selbstverlöschend |
| Eigenschaft | Wert |
| Material | Polyoefin |
| Wandung | mittelwandig |
| Kleber | mit Innenkleber |
| Schrumpfverhältnis | 4.5:1 |
| Schrumpftemperatur(min.) | 135°C |
| Dauerbetriebstemperatur | -55ºC - 130ºC |
| Zugfestigkeit(N/mm2) | 22 |
| Bruchdehnung(%) | 650 |
| Längenänderung | -10% max. |
| Durchschlagfestigkeit | 16 kV/mm |
| Spezifischer Widerstand (Ohm x cm) | 10^13 |
| Brennbarkeit | nicht selbstverlöschend |
Medium-wall heat-shrink tubing with and without internal adhesive - Technical data sheet for download
For detailed information on our medium-wall heat shrink tubing with and without internal adhesive, we offer you a comprehensive technical data sheet for download. This data sheet contains all the important technical specifications, including material composition, temperature resistance and electrical insulation properties. You will also find detailed information on the dimensions and availability of our products.
Download: Technical data sheet
Do you have any questions about our offer?
Medium-wall shrink tubing with and without internal adhesive
Medium-wall heat-shrink tubing with internal adhesive for watertight connections
As a leading distributor of medium-wall heat shrink tubing with and without internal adhesive, we offer you a wide selection of high-quality products. Our medium-wall heat shrink tubing with internal adhesive ensures watertight connections and offers optimum protection for your cables. If you are looking for medium-wall heat shrink tubing without internal adhesive in various sizes, you have come to the right place.
Our medium-wall heat-shrink tubing with internal adhesive is perfect for cable protection and offers a reliable solution for various applications. Whether you need medium-wall heat shrink tubing without inner adhesive for electronics or for other purposes, we have the right product for you.
Why should you choose us as your distributor? Quite simply, we offer you a large selection of medium-wall heat shrink tubing with and without internal adhesive so that you can always find the right product for your needs. Our heat shrink tubing is available in various sizes, so you always have the right solution.
Medium-wall heat shrink tubing without internal adhesive is ideal for electronics projects. It offers reliable protection and is easy to use. If, on the other hand, you need medium-wall heat shrink tubing with internal adhesive to create watertight connections, you will appreciate our high-quality products.
Our medium-wall heat-shrink tubing with internal adhesive is particularly robust and durable. They protect your cables from external influences and ensure that your connections are secure and protected. With our medium-wall heat-shrink tubing with inner adhesive, you can be sure that your cable connections are optimally protected.
As a retailer, we know how important it is to offer high-quality products at a fair price. That's why we make sure that our medium-wall heat shrink tubing with and without inner adhesive always meets the highest quality standards.
If you are looking for medium-wall heat shrink tubing with and without internal adhesive, we are the right retailer for you. Contact us today and see our large selection and outstanding service for yourself. We look forward to helping you!
Our medium-wall heat-shrink tubing with internal adhesive is perfect for cable protection and offers a reliable solution for various applications. Whether you need medium-wall heat shrink tubing without inner adhesive for electronics or for other purposes, we have the right product for you.
Why should you choose us as your distributor? Quite simply, we offer you a large selection of medium-wall heat shrink tubing with and without internal adhesive so that you can always find the right product for your needs. Our heat shrink tubing is available in various sizes, so you always have the right solution.
Medium-wall heat shrink tubing without internal adhesive is ideal for electronics projects. It offers reliable protection and is easy to use. If, on the other hand, you need medium-wall heat shrink tubing with internal adhesive to create watertight connections, you will appreciate our high-quality products.
Our medium-wall heat-shrink tubing with internal adhesive is particularly robust and durable. They protect your cables from external influences and ensure that your connections are secure and protected. With our medium-wall heat-shrink tubing with inner adhesive, you can be sure that your cable connections are optimally protected.
As a retailer, we know how important it is to offer high-quality products at a fair price. That's why we make sure that our medium-wall heat shrink tubing with and without inner adhesive always meets the highest quality standards.
If you are looking for medium-wall heat shrink tubing with and without internal adhesive, we are the right retailer for you. Contact us today and see our large selection and outstanding service for yourself. We look forward to helping you!
What can we do for you?
Contact our product experts
What can we do for you?
Contact our product experts
Oliver Bürli
Head of Hose Technology, Sales and Product Management
Do you have any questions about:
Medium-wall shrink tubing with and without internal adhesive
Just send us a short message and we will be happy to answer your questions by phone or e-mail.
Questions?
Write to us!
Would you like to find out more about our high-quality products?
We have a large warehouse, short delivery times and duty-free delivery!
Do not hesitate to contact us, we will be happy toadvise you personally.
Do not hesitate to contact us, we will be happy toadvise you personally.
Your contact persons
Request a callback
Would you like a personal telephone consultation?
Simply fill out the form and we will get back to you.
What are the advantages of using DC voltage transformers compared to AC voltage transformers?
Please fill out the form below to download the data sheet for this product.
What are the advantages of using DC voltage transformers compared to AC voltage transformers?
You can now click and download the PDF documents as usual.
X
Get in touch with us
Our hoses at a glance
Because the part makes the price. Just enter your email and we will send you our catalog free of charge.
Request catalog
Frequently asked questions about medium-wall shrink tubing with and without internal adhesive
1. what is the difference between heat shrink tubing with and without internal adhesive?
- Heat shrink tubing with internal adhesive provides additional sealing and protection as the adhesive melts when heated and creates a watertight connection.
- Heat shrink tubing without internal adhesive is flexible and easier to handle, ideal for applications where sealing is not required.
2. in which sizes are medium-wall heat shrink tubing available?
- Heat-shrink tubing is available in various sizes to meet different requirements.
- You can find heat shrink tubing in diameters from 1 mm to 100 mm, depending on your needs.
3. for which applications is heat-shrink tubing without internal adhesive suitable?
- Heat shrink tubing without internal adhesive is ideal for electronics projects where a watertight seal is not required.
- It is often used to insulate and protect cables and connections.
4. Why should I use heat-shrink tubing with internal adhesive?
- Heat-shrink tubing with internal adhesive offers additional protection against moisture and environmental influences.
- It is ideal for applications where a watertight connection is required, e.g. outdoors or for underground installations.
5. how to use medium-wall heat shrink tubing correctly?
- Cut the heat-shrink tubing to the desired length.
- Slide the heat-shrink tubing over the area to be protected.
- Heat the heat-shrink tubing evenly with a hot air gun until it fits tightly around the connection.
