Shrink tubing 3:1 thin-walled Dealer
- Large selection of shrink tubing 3:1 thin-walled
- For the electrical engineering and electronics business
- A direct line instead of a waiting loop - we are there for you
Over 60 years of experience
in the electrical engineering and electronics industry
Short delivery times
through optimized warehousing
Germany and Switzerland
Dual location strength and reliability
Shrink tubing 3:1 thin-walled in our range:
In our range you will find a variety of sizes, colors and materials that meet all industry-standard specifications and are suitable for precise applications. Each product in our range has been carefully selected to ensure the highest quality and performance.
Below you will find detailed tables with sizes and technical data for each of our hoses. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right hose for your specific requirements.
Below you will find detailed tables with sizes and technical data for each of our hoses. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right hose for your specific requirements.
Shrink tubing 3:1 thin-walled - Size chart
Shrink tubing 3:1 thin-walled - Technical data
| Eigenschaft | Wert |
| Material | Polyoefin |
| Wandung | dünnwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 3:1 |
| Schrumpftemperatur(min.) | 135°C |
| Dauerbetriebstemperatur | -55ºC - 135ºC |
| Zugfestigkeit(N/mm2) | 14-24 |
| Bruchdehnung(%) | 400-450 |
| Längenänderung | -5% max. |
| Durchschlagfestigkeit | 21-45 kV/mm |
| Spezifischer Widerstand (Ohm x cm) | 10^14 |
| Brennbarkeit | selbstverlöschend |
| Feature | Value |
| Material | Polyoefin |
| Wall | thin-walled |
| Glue | without inside adhesive |
| Shrinkage ratio | 3:1 |
| Shrinkage temperature (min.) | 135°C |
| Continuous operating temperature | -55ºC - 135ºC |
| Tensile strength(N/mm2) | 14-24 |
| Elongation at break(%) | 400-450 |
| Length change | -5% max. |
| Dielectric strength | 21-45 kV/mm |
| Specific resistance (Ohm x cm) | 10^14 |
| Flammability | self-extinguishing |
| Característica | Valor |
| Material | Polioefin |
| Pared | Paredes finas |
| Pegamento | Sin adhesivo interior |
| Índice de contracción | 3:1 |
| Temperatura de retracción (mín.) | 135°C |
| Temperatura de funcionamiento continuo | -55ºC - 135ºC |
| Resistencia a la tracción (N/mm2) | 14-24 |
| Alargamiento a la rotura(%) | 400-450 |
| Cambio de longitud | -5% max. |
| Rigidez dieléctrica | 21-45 kV/mm |
| Resistencia específica (Ohm x cm) | 10^14 |
| Inflamabilidad | autoextinguible |
| Cecha | Wartość |
| Materiał | Polyoefin |
| Ściana | Cienkościenne |
| Klej | Bez wewnętrznego kleju |
| Współczynnik skurczu | 3:1 |
| Temperatura skurczu (min.) | 135°C |
| Temperatura pracy ciągłej | -55ºC - 135ºC |
| Wytrzymałość na rozciąganie (N/mm2) | 14-24 |
| Wydłużenie przy zerwaniu (%) | 400-450 |
| Zmiana długości | -5% max. |
| Wytrzymałość dielektryczna | 21-45 kV/mm |
| Opór właściwy (Ohm x cm) | 10^14 |
| Palność | samogasnący |
| Propriété | Valeur |
| Matériau | Polyoefin |
| Paroi | à paroi mince |
| Colle | sans adhésif intérieur |
| Rapport de rétraction | 3:1 |
| Température de rétraction (min.) | 135°C |
| Température de fonctionnement continu | -55ºC - 135ºC |
| Résistance à la traction (N/mm2) | 14-24 |
| Allongement à la rupture(%) | 400-450 |
| Changement de longueur | -5% max. |
| Rigidité diélectrique | 21-45 kV/mm |
| Résistance spécifique (Ohm x cm) | 10^14 |
| Inflammabilité | auto-extinguible |
| Caratteristica | Valore |
| Materiale | Polinefrina |
| Muro | A parete sottile |
| Colla | Senza adesivo interno |
| Rapporto di restringimento | 3:1 |
| Temperatura di restringimento (min.) | 135°C |
| Temperatura di esercizio continua | -55ºC - 135ºC |
| Resistenza alla trazione (N/mm2) | 14-24 |
| Allungamento a rottura (%) | 400-450 |
| Variazione della lunghezza | -5% max. |
| Rigidità dielettrica | 21-45 kV/mm |
| Resistenza specifica (Ohm x cm) | 10^14 |
| Infiammabilità | autoestinguente |
| الميزة | القيمة |
| المواد | البوليفينات |
| الحائط | رقيقة الجدران |
| الغراء | بدون لاصق داخل |
| نسبة الانكماش | 3:1 |
| درجة حرارة الانكماش (دقيقة) | 135°C |
| درجة حرارة التشغيل المستمرة | -55ºC - 135ºC |
| قوة الشد (N/mm2) | 14-24 |
| استطالة عند الكسر (٪) | 400-450 |
| تغيير الطول | -5% max. |
| قوة عازل | 21-45 kV/mm |
| مقاومة محددة (أوم × سم) | 10^14 |
| قابلية للاشتعال | إطفاء ذاتي |
| 특징 | 값 |
| 재료 | 폴리에핀 |
| 벽 | 얇은 벽 |
| 접착제 | 내부 접착제가 없다 |
| 수축률 | 3:1 |
| 수축 온도(min.) | 135°C |
| 연속 작동 온도 | -55ºC - 135ºC |
| 인장 강도(N/mm2) | 14-24 |
| 파손시 신장(%) | 400-450 |
| 길이 변경 | -5% max. |
| 유전체 강도 | 21-45 kV/mm |
| 비저항 (Ohm x cm) | 10^14 |
| 가연성 | 자기 소화 |
| 特徴 | 価値 |
| 素材 | ポリオフィン |
| 壁 | 薄肉 |
| 接着剤 | 内側接着剤なし |
| 収縮率 | 3:1 |
| 収縮温度（最低） | 135°C |
| 連続使用温度 | -55ºC - 135ºC |
| 引張強さ (N/mm2) | 14-24 |
| 破断伸度(%) | 400-450 |
| 長さの変化 | -5% max. |
| 絶縁耐力 | 21-45 kV/mm |
| 比抵抗（オーム×cm） | 10^14 |
| 引火性 | 自己消火性 |
| 特征 | 价值 |
| 材料 | 聚烯烃 |
| 墙 | 薄壁的 |
| 胶合 | 无内胶 |
| 收缩率 | 3:1 |
| 收缩温度（最小值） | 135°C |
| 连续工作温度 | -55ºC - 135ºC |
| 抗拉强度(N/mm2) | 14-24 |
| 断裂伸长率（%） | 400-450 |
| 长度变化 | -5% max. |
| 介电强度 | 21-45 kV/mm |
| 比电阻（欧姆×厘米） | 10^14 |
| 易燃性 | 自熄的 |
| Funkce? | Hodnota? |
| Materiál? | Polyofiny |
| Zdi? | Tenkostěnná |
| Plepidlo? | Bez vnitřního lepidla |
| Poměr smršťování | 3:1 |
| Teplota smršťování (min.) | 135°C |
| Kontinuální provozní teplota | -55ºC - 135ºC |
| Pevnost v tahu (N/mm2) | 14-24 |
| Prodloužení při přerušení (%) | 400-450 |
| Změna délky | -5% max. |
| Dielektrická pevnost | 21-45 kV/mm |
| Specifický odpor (Ohm x cm) | 10^14 |
| Hořlavost? | Samočinné vyhasení |
| Característica | Valor |
| Material | Polioefin |
| Parede | Paredes finas |
| Cola | Sem adesivo interior |
| Rácio de retração | 3:1 |
| Temperatura de retração (min.) | 135°C |
| Temperatura de funcionamento contínuo | -55ºC - 135ºC |
| Resistência à tração (N/mm2) | 14-24 |
| Alongamento de rotura (%) | 400-450 |
| Alteração do comprimento | -5% max. |
| Resistência dieléctrica | 21-45 kV/mm |
| Resistência específica (Ohm x cm) | 10^14 |
| Inflamabilidade | auto-extinguível |
| Характеристика | Значение |
| Материал | Polyoefin |
| Стена | Тонкостенные |
| Клей | Без внутреннего клея |
| Коэффициент усадки | 3:1 |
| Температура усадки (мин.) | 135°C |
| Непрерывная рабочая температура | -55ºC - 135ºC |
| Прочность на разрыв (Н/мм2) | 14-24 |
| Удлинение при разрыве (%) | 400-450 |
| Изменение длины | -5% max. |
| Диэлектрическая прочность | 21-45 kV/mm |
| Удельное сопротивление (Ом х см) | 10^14 |
| Воспламеняемость | Самозатухающий |
| Özellik | Değer |
| Malzeme | Poliofin |
| Duvarlar | Ince duvarlı |
| Tutkal | İç yapıştırıcı olmadan |
| Büzülme oranı | 3:1 |
| Büzülme sıcaklığı (min.) | 135°C |
| Sürekli çalışma sıcaklığı | -55ºC - 135ºC |
| Çekme mukavemeti (N/mm2) | 14-24 |
| Kırılma uzaması (%) | 400-450 |
| Uzun değişikliği | -5% max. |
| Dielektrik mukavemet | 21-45 kV/mm |
| Spesifik direnç (Ohm x cm) | 10^14 |
| Yanıcılık mı? | Kendi kendini söndürme |
| Eature | AlueCity in Alberta Canada |
| AZ ANYAK | Olioefin |
| Minden | Vágfalú |
| Lue | Belső ragasztóanyag nélkül |
| Hrinkage arány | 3:1 |
| Hrinkage hőmérséklet (minimum) | 135°C |
| A folyamatos üzemi hőmérséklet | -55ºC - 135ºC |
| Szilószilársőség (/mm2) | 14-24 |
| Hosszúság szünetelés (%) | 400-450 |
| Hosszúsági változás | -5% max. |
| IElectric erősség | 21-45 kV/mm |
| Speciális rezisztencia (hm x cm) | 10^14 |
| Felhúzódási képesség | Öntöltő |
| ویژگی ها | ارزش |
| مواد | پلی فین |
| دیوار | دیواره نازک |
| چسب ؟ | بدون چسب داخلی |
| نسبت انقباض | 3:1 |
| دمای انقباض (دقیق) | 135°C |
| دمای کار مداوم | -55ºC - 135ºC |
| مقاومت کششی (N/mm2) | 14-24 |
| کشیدگی در زمان شکستن (٪) | 400-450 |
| تغییر طول | -5% max. |
| مقاومت دی الکتریک | 21-45 kV/mm |
| مقاومت خاص (اهم × سانتی متر) | 10^14 |
| قابل اشتعال | خودخاموش کردن |
| Functie | Waarde |
| Materiaal | Polyoefin |
| Muur | Dunwandig |
| Lijm | Zonder lijm aan de binnenkant |
| Krimpverhouding | 3:1 |
| Krimptemperatuur (min.) | 135°C |
| Continue bedrijfstemperatuur | -55ºC - 135ºC |
| Treksterkte (N/mm2) | 14-24 |
| Rek bij breuk (%) | 400-450 |
| Lengteverandering | -5% max. |
| Diëlektrische sterkte | 21-45 kV/mm |
| Specifieke weerstand (Ohm x cm) | 10^14 |
| Ontvlambaarheid | zelfdovend |
| Caracteristică | Valoare |
| Material | Polyoefin |
| Perete | Cu pereți subțiri |
| Lipici | Fără adeziv interior |
| Raportul de contracție | 3:1 |
| Temperatura de contracție (min.) | 135°C |
| Temperatura de funcționare continuă | -55ºC - 135ºC |
| Rezistența la tracțiune (N/mm2) | 14-24 |
| Alungirea la rupere (%) | 400-450 |
| Schimbare de lungime | -5% max. |
| Rezistența dielectrică | 21-45 kV/mm |
| Rezistența specifică (Ohm x cm) | 10^14 |
| Inflamabilitate | autoextincție |
| Ominaisuus | Arvo |
| Materiaali | Polyoefin |
| Seinä | Ohutseinäiset |
| Liima | Ilman sisäpuolen liimaa |
| Kutistumissuhde | 3:1 |
| Kutistumislämpötila (min.) | 135°C |
| Jatkuva käyttölämpötila | -55ºC - 135ºC |
| Vetolujuus (N/mm2) | 14-24 |
| Murtovenymä (%) | 400-450 |
| Pituuden muutos | -5% max. |
| Dielektrinen lujuus | 21-45 kV/mm |
| Ominaisvastus (Ohm x cm) | 10^14 |
| Syttyvyys | itsestään sammuva |
| Funkcia | Hodnota |
| Materiál | Polyoefin |
| Stena | Tenkostenné |
| Lepidlo | Bez vnútorného lepidla |
| Pomer zmrštenia | 3:1 |
| Teplota zmrštenia (min.) | 135°C |
| Trvalá prevádzková teplota | -55ºC - 135ºC |
| Pevnosť v ťahu (N/mm2) | 14-24 |
| Predĺženie pri pretrhnutí (%) | 400-450 |
| Zmena dĺžky | -5% max. |
| Dielektrická pevnosť | 21-45 kV/mm |
| Špecifický odpor (Ohm x cm) | 10^14 |
| Horľavosť | samozhášacie |
| Funktion | Værdi |
| Materiale | Polyoefin |
| Væg | Tyndvægget |
| Lim | Uden indvendigt klæbemiddel |
| Krympningsgrad | 3:1 |
| Krympetemperatur (min.) | 135°C |
| Kontinuerlig driftstemperatur | -55ºC - 135ºC |
| Trækstyrke (N/mm2) | 14-24 |
| Forlængelse ved brud (%) | 400-450 |
| Ændring af længde | -5% max. |
| Dielektrisk styrke | 21-45 kV/mm |
| Specifik modstand (Ohm x cm) | 10^14 |
| Brandfarlighed | selvslukkende |
| Χαρακτηριστικό γνώρισμα | Αξία |
| Υλικό | Polyoefin |
| Τοίχος | Λεπτότοιχα |
| Κόλλα | Χωρίς εσωτερική κόλλα |
| Αναλογία συρρίκνωσης | 3:1 |
| Θερμοκρασία συρρίκνωσης (min.) | 135°C |
| Συνεχής θερμοκρασία λειτουργίας | -55ºC - 135ºC |
| Αντοχή σε εφελκυσμό (N/mm2) | 14-24 |
| Επιμήκυνση κατά τη θραύση (%) | 400-450 |
| Αλλαγή μήκους | -5% max. |
| Διηλεκτρική αντοχή | 21-45 kV/mm |
| Ειδική αντίσταση (Ohm x cm) | 10^14 |
| Αναφλεξιμότητα | αυτοσβενόμενο |
| Функции | Стойност |
| Материал | Polyoefin |
| Стена | Тънкостенни |
| Лепило | Без вътрешно лепило |
| Коефициент на свиване | 3:1 |
| Температура на свиване (мин.) | 135°C |
| Непрекъсната работна температура | -55ºC - 135ºC |
| Якост на опън (N/mm2) | 14-24 |
| Удължение при скъсване (%) | 400-450 |
| Промяна на дължината | -5% max. |
| Диелектрична якост | 21-45 kV/mm |
| Специфично съпротивление (Ohm x cm) | 10^14 |
| Запалимост | самозагасващ се |
| Funktion | Värde |
| Material | Polyoefin |
| Vägg | Tunnväggig |
| Lim | Utan självhäftande insida |
| Krympningsgrad | 3:1 |
| Krympningstemperatur (min.) | 135°C |
| Kontinuerlig driftstemperatur | -55ºC - 135ºC |
| Draghållfasthet (N/mm2) | 14-24 |
| Töjning vid brott (%) | 400-450 |
| Längdförändring | -5% max. |
| Dielektrisk hållfasthet | 21-45 kV/mm |
| Specifikt motstånd (Ohm x cm) | 10^14 |
| Brandfarlighet | självsläckande |
| Funkcija | Vrednost |
| Material | Polioefin |
| Stena | Tankostenski |
| Lepilo | Brez notranjega lepila |
| Razmerje krčenja | 3:1 |
| Temperatura krčenja (min.) | 135°C |
| Trajna delovna temperatura | -55ºC - 135ºC |
| Natezna trdnost (N/mm2) | 14-24 |
| Podaljšek pri pretrgu (%) | 400-450 |
| Sprememba dolžine | -5% max. |
| Dielektrična trdnost | 21-45 kV/mm |
| Specifična upornost (Ohm x cm) | 10^14 |
| Vnetljivost | samougasljivi |
| Funktsioon | Väärtus |
| Materjal | Polyoefin |
| Seina | Õhukesed seinad |
| Liim | Ilma sisemise liimita |
| Kahanemise suhe | 3:1 |
| Kahanemistemperatuur (min.) | 135°C |
| Pidev töötemperatuur | -55ºC - 135ºC |
| Tõmbetugevus (N/mm2) | 14-24 |
| Pikendus murdumisel (%) | 400-450 |
| Pikkuse muutus | -5% max. |
| Dielektriline tugevus | 21-45 kV/mm |
| Eritakistus (Ohm x cm) | 10^14 |
| Põletatavus | isekustuv |
| Funkcija | Vertė |
| Medžiaga | Polioefinas |
| Siena | Plonasienis |
| Klijai | Be vidinių klijų |
| Susitraukimo santykis | 3:1 |
| Susitraukimo temperatūra (min.) | 135°C |
| Nuolatinė darbinė temperatūra | -55ºC - 135ºC |
| Tempimo stipris (N/mm2) | 14-24 |
| Pailgėjimas nutrūkus (%) | 400-450 |
| Ilgio pokytis | -5% max. |
| Dielektrinis stipris | 21-45 kV/mm |
| Savitoji varža (Ohm x cm) | 10^14 |
| Degumas | savaime užgęstantis |
| Funkcija | Vērtība |
| Materiāls | Polyoefin |
| Siena | Plānsienu |
| Līme | Bez iekšējās līmes |
| Saraušanās koeficients | 3:1 |
| Termiskās saraušanās temperatūra (min.) | 135°C |
| Pastāvīgā darba temperatūra | -55ºC - 135ºC |
| Stiepes izturība (N/mm2) | 14-24 |
| Pagarinājums pārraušanas brīdī (%) | 400-450 |
| Garuma izmaiņas | -5% max. |
| Dielektriskā izturība | 21-45 kV/mm |
| Īpatnējā pretestība (Ohm x cm) | 10^14 |
| Uzliesmojamība | pašdzēsošs |
| Eigenschaft | Wert |
| Material | Polyoefin |
| Wandung | dünnwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 3:1 |
| Schrumpftemperatur(min.) | 135°C |
| Dauerbetriebstemperatur | -55ºC - 135ºC |
| Zugfestigkeit(N/mm2) | 14-24 |
| Bruchdehnung(%) | 400-450 |
| Längenänderung | -5% max. |
| Durchschlagfestigkeit | 21-45 kV/mm |
| Spezifischer Widerstand (Ohm x cm) | 10^14 |
| Brennbarkeit | selbstverlöschend |
| Eigenschaft | Wert |
| Material | Polyoefin |
| Wandung | dünnwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 3:1 |
| Schrumpftemperatur(min.) | 135°C |
| Dauerbetriebstemperatur | -55ºC - 135ºC |
| Zugfestigkeit(N/mm2) | 14-24 |
| Bruchdehnung(%) | 400-450 |
| Längenänderung | -5% max. |
| Durchschlagfestigkeit | 21-45 kV/mm |
| Spezifischer Widerstand (Ohm x cm) | 10^14 |
| Brennbarkeit | selbstverlöschend |
Shrink tubing 3:1 thin-walled - Technical data sheet for download
For detailed information on our 3:1 thin-walled heat shrink tubing, we offer you a comprehensive technical data sheet for download. This data sheet contains all the important technical specifications, including material composition, temperature resistance and electrical insulation properties. You will also find detailed information on the dimensions and availability of our products.
Download: Technical data sheet
Do you have any questions about our offer?
Shrink tubing 3:1 thin-walled
Flexible shrink tubing 3:1 for electronic applications
As a distributor of 3:1 thin-wall heat shrink tubing, we offer you high-quality products that have been specially developed for various applications. Our 3:1 thin-wall heat shrink tubing for cable insulation is ideal for insulating your cables safely and reliably. These flexible 3:1 heat shrink tubes are perfect for electronic applications where precision and safety are essential.
Our heat-shrink tubing is not only flexible, but also flame-retardant. The flame retardant 3:1 heat shrink tubing thin wall offers additional protection and safety, especially in areas where high temperatures can occur. If you are looking for 3:1 thin-wall heat shrink tubing for industrial applications, then you have come to the right place. Our products are robust and durable, ideal for use in demanding industrial environments.
As an experienced dealer, we know how important quality and reliability are. That's why we only offer the best heat shrink tubing. Whether you need thin wall 3:1 heat shrink tubing for cable insulation or flexible 3:1 heat shrink tubing for electronic applications, we have the right product for you. Our flame-retardant 3:1 thin-wall heat shrink tubing is particularly safe and provides optimum protection.
Our heat shrink tubing is easy to use and provides a quick and efficient solution to your insulation needs. As a distributor of 3:1 thin-wall heat shrink tubing, we are on hand with advice and assistance to help you make the right choice for your application. You can rely on our experience and quality.
Visit us and discover our extensive range of heat shrink tubing. We offer you a large selection of thin-walled 3:1 heat shrink tubing for cable insulation and flexible 3:1 heat shrink tubing for electronic applications. Our flame-retardant 3:1 thin-wall heat shrink tubing is the ideal choice for increased safety. We offer you robust and durable solutions for industrial applications. Put your trust in us as your reliable distributor for 3:1 thin-walled heat shrink tubing.
Our heat-shrink tubing is not only flexible, but also flame-retardant. The flame retardant 3:1 heat shrink tubing thin wall offers additional protection and safety, especially in areas where high temperatures can occur. If you are looking for 3:1 thin-wall heat shrink tubing for industrial applications, then you have come to the right place. Our products are robust and durable, ideal for use in demanding industrial environments.
As an experienced dealer, we know how important quality and reliability are. That's why we only offer the best heat shrink tubing. Whether you need thin wall 3:1 heat shrink tubing for cable insulation or flexible 3:1 heat shrink tubing for electronic applications, we have the right product for you. Our flame-retardant 3:1 thin-wall heat shrink tubing is particularly safe and provides optimum protection.
Our heat shrink tubing is easy to use and provides a quick and efficient solution to your insulation needs. As a distributor of 3:1 thin-wall heat shrink tubing, we are on hand with advice and assistance to help you make the right choice for your application. You can rely on our experience and quality.
Visit us and discover our extensive range of heat shrink tubing. We offer you a large selection of thin-walled 3:1 heat shrink tubing for cable insulation and flexible 3:1 heat shrink tubing for electronic applications. Our flame-retardant 3:1 thin-wall heat shrink tubing is the ideal choice for increased safety. We offer you robust and durable solutions for industrial applications. Put your trust in us as your reliable distributor for 3:1 thin-walled heat shrink tubing.
What can we do for you?
Contact our product experts
What can we do for you?
Contact our product experts
Oliver Bürli
Head of Hose Technology, Sales and Product Management
Do you have any questions about:
Shrink tubing 3:1 thin-walled
Just send us a short message and we will be happy to answer your questions by phone or e-mail.
Questions?
Write to us!
Would you like to find out more about our high-quality products?
We have a large warehouse, short delivery times and duty-free delivery!
Do not hesitate to contact us, we will be happy toadvise you personally.
Do not hesitate to contact us, we will be happy toadvise you personally.
Your contact persons
Request a callback
Would you like a personal telephone consultation?
Simply fill out the form and we will get back to you.
What are the advantages of using DC voltage transformers compared to AC voltage transformers?
Please fill out the form below to download the data sheet for this product.
What are the advantages of using DC voltage transformers compared to AC voltage transformers?
You can now click and download the PDF documents as usual.
X
Get in touch with us
Our hoses at a glance
Because the part makes the price. Just enter your email and we will send you our catalog free of charge.
Request catalog
Frequently asked questions about shrink tubing 3:1 thin-walled
1. what does the shrink ratio 3:1 mean for heat-shrink tubing?
The shrink ratio 3:1 means that the heat shrink tubing can shrink to a third of its original diameter. For example, a tube with a diameter of 30 mm shrinks to 10 mm when heated.
2. how do I use a 3:1 thin-walled shrink tube?
- Cut the heat-shrink tubing to the required length.
- Slide the heat-shrink tubing over the object to be insulated.
- Heat the heat-shrink tubing evenly with a hot air gun or other suitable tool until it has contracted completely.
3. what applications are there for thin-walled 3:1 heat shrink tubing?
- Cable insulation: Protecting and insulating electrical cables and connections.
- Electronic applications: Protection and insulation of components and connections.
- Industrial applications: Protection of pipes, hoses and other industrial components.
- Flame retardant applications: Use in areas where fire protection is important.
4. What are the advantages of flame-retardant 3:1 thin-walled heat-shrink tubing?
- Increased fire protection: Reduction of the risk of fire due to flame-retardant properties.
- Safety: Additional safety for applications in areas with high temperatures.
- Versatility: Suitable for various applications in electronics, industry and more.
5. How do I choose the right 3:1 thin-walled heat shrink tubing for my application?
- Determine the diameter of the object to be insulated and select a heat-shrink tubing with a suitable diameter.
- Consider the requirements of your application, such as temperature resistance and flame retardancy.
- Choose the right length of heat shrink tubing for your specific application.
- Pay attention to the material properties of the heat shrink tubing to ensure that it meets the requirements of your application.
