Shrink tubing thin-walled fluoroelastomer VITON-E Dealer
- Large selection of shrink tubing thin-walled fluoroelastomer VITON-E
- For the electrical engineering and electronics business
- A direct line instead of a waiting loop - we are there for you
Over 60 years of experience
in the electrical engineering and electronics industry
Short delivery times
through optimized warehousing
Germany and Switzerland
Dual location strength and reliability
Shrink tubing thin-walled fluoroelastomer VITON-E in our range:
In our range you will find a variety of sizes, colors and materials that meet all industry-standard specifications and are suitable for precise applications. Each product in our range has been carefully selected to ensure the highest quality and performance.
Below you will find detailed tables with sizes and technical data for each of our hoses. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right hose for your specific requirements.
Below you will find detailed tables with sizes and technical data for each of our hoses. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right hose for your specific requirements.
Shrink tubing thin-walled fluoroelastomer VITON-E - Size chart
Shrink tubing thin-walled fluoroelastomer VITON-E - Technical data
| Eigenschaft | Wert |
| Material | Fluorelastomer |
| Wandung | dünnwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 2 : 1 |
| Schrumpftemperatur (min.) | 170°C |
| Dauerbetriebstemperatur | -55 ºC - + 200 ºC |
| Zugfestigkeit (N/mm2) | 19 |
| Bruchdehnung (%) | 500 |
| Längenänderung | -10 % max. |
| Durchschlagfestigkeit | 14 kV / mm |
| Spezifischer Widerstand (Ohm x cm) | 10^12 |
| Brennbarkeit | selbstverlöschend |
| Feature | Value |
| Material | Fluoroelastomer |
| Wall | thin-walled |
| Glue | without inside adhesive |
| Shrinkage ratio | 2 : 1 |
| Shrink temperature (min.) | 170°C |
| Continuous operating temperature | -55 ºC - + 200 ºC |
| Tensile strength (N/mm2) | 19 |
| Elongation at break (%) | 500 |
| Length change | -10 % max. |
| Dielectric strength | 14 kV / mm |
| Specific resistance (Ohm x cm) | 10^12 |
| Flammability | self-extinguishing |
| Característica | Valor |
| Material | Fluoroelastómero |
| Pared | Paredes finas |
| Pegamento | Sin adhesivo interior |
| Índice de contracción | 2 : 1 |
| Temperatura de retracción (mín.) | 170°C |
| Temperatura de funcionamiento continuo | -55 ºC - + 200 ºC |
| Resistencia a la tracción (N/mm2) | 19 |
| Alargamiento a la rotura (%) | 500 |
| Cambio de longitud | -10 % max. |
| Rigidez dieléctrica | 14 kV / mm |
| Resistencia específica (Ohm x cm) | 10^12 |
| Inflamabilidad | autoextinguible |
| Cecha | Wartość |
| Materiał | Fluoroelastomer |
| Ściana | Cienkościenne |
| Klej | Bez wewnętrznego kleju |
| Współczynnik skurczu | 2 : 1 |
| Temperatura obkurczania (min.) | 170°C |
| Temperatura pracy ciągłej | -55 ºC - + 200 ºC |
| Wytrzymałość na rozciąganie (N/mm2) | 19 |
| Wydłużenie przy zerwaniu (%) | 500 |
| Zmiana długości | -10 % max. |
| Wytrzymałość dielektryczna | 14 kV / mm |
| Opór właściwy (Ohm x cm) | 10^12 |
| Palność | samogasnący |
| Propriété | Valeur |
| Matériau | Élastomère fluoré |
| Paroi | à paroi mince |
| Colle | sans adhésif intérieur |
| Rapport de rétraction | 2 : 1 |
| Température de rétraction (min.) | 170°C |
| Température de fonctionnement continu | -55 ºC - + 200 ºC |
| Résistance à la traction (N/mm2) | 19 |
| Allongement à la rupture (%) | 500 |
| Changement de longueur | -10 % max. |
| Rigidité diélectrique | 14 kV / mm |
| Résistance spécifique (Ohm x cm) | 10^12 |
| Inflammabilité | auto-extinguible |
| Caratteristica | Valore |
| Materiale | Fluoroelastomero |
| Muro | A parete sottile |
| Colla | Senza adesivo interno |
| Rapporto di restringimento | 2 : 1 |
| Temperatura di restringimento (min.) | 170°C |
| Temperatura di esercizio continua | -55 ºC - + 200 ºC |
| Resistenza alla trazione (N/mm2) | 19 |
| Allungamento a rottura (%) | 500 |
| Variazione della lunghezza | -10 % max. |
| Rigidità dielettrica | 14 kV / mm |
| Resistenza specifica (Ohm x cm) | 10^12 |
| Infiammabilità | autoestinguente |
| الميزة | القيمة |
| المواد | الفلوريال elastomer |
| الحائط | رقيقة الجدران |
| الغراء | بدون لاصق داخل |
| نسبة الانكماش | 2 : 1 |
| تقلص درجة الحرارة (دقيقة) | 170°C |
| درجة حرارة التشغيل المستمرة | -55 ºC - + 200 ºC |
| قوة الشد (N/mm2) | 19 |
| استطالة عند الكسر (٪) | 500 |
| تغيير الطول | -10 % max. |
| قوة عازل | 14 kV / mm |
| مقاومة محددة (أوم × سم) | 10^12 |
| قابلية للاشتعال | إطفاء ذاتي |
| 특징 | 값 |
| 재료 | 플루오로탄성체 |
| 벽 | 얇은 벽 |
| 접착제 | 내부 접착제가 없다 |
| 수축률 | 2 : 1 |
| 수축 온도(min.) | 170°C |
| 연속 작동 온도 | -55 ºC - + 200 ºC |
| 인장 강도(N/mm2) | 19 |
| 파손시 신장(%) | 500 |
| 길이 변경 | -10 % max. |
| 유전체 강도 | 14 kV / mm |
| 비저항 (Ohm x cm) | 10^12 |
| 가연성 | 자기 소화 |
| 特徴 | 価値 |
| 素材 | フッ素ゴム |
| 壁 | 薄肉 |
| 接着剤 | 内側接着剤なし |
| 収縮率 | 2 : 1 |
| 収縮温度（最低） | 170°C |
| 連続使用温度 | -55 ºC - + 200 ºC |
| 引張強さ (N/mm2) | 19 |
| 破断伸度(%) | 500 |
| 長さの変化 | -10 % max. |
| 絶縁耐力 | 14 kV / mm |
| 比抵抗（オーム×cm） | 10^12 |
| 引火性 | 自己消火性 |
| 特征 | 价值 |
| 材料 | 含氟弹性体 |
| 墙 | 薄壁的 |
| 胶合 | 无内胶 |
| 收缩率 | 2 : 1 |
| 收缩温度（最小值） | 170°C |
| 连续工作温度 | -55 ºC - + 200 ºC |
| 抗拉强度(N/mm2) | 19 |
| 断裂伸长率（%） | 500 |
| 长度变化 | -10 % max. |
| 介电强度 | 14 kV / mm |
| 比电阻（欧姆×厘米） | 10^12 |
| 易燃性 | 自熄的 |
| Funkce? | Hodnota? |
| Materiál? | Fluoroelastomer |
| Zdi? | Tenkostěnná |
| Plepidlo? | Bez vnitřního lepidla |
| Poměr smršťování | 2 : 1 |
| Teplota smršťování (min.) | 170°C |
| Kontinuální provozní teplota | -55 ºC - + 200 ºC |
| Pevnost v tahu (N/mm2) | 19 |
| Prodloužení při přerušení (%) | 500 |
| Změna délky | -10 % max. |
| Dielektrická pevnost | 14 kV / mm |
| Specifický odpor (Ohm x cm) | 10^12 |
| Hořlavost? | Samočinné vyhasení |
| Característica | Valor |
| Material | Fluoroelastómero |
| Parede | Paredes finas |
| Cola | Sem adesivo interior |
| Rácio de retração | 2 : 1 |
| Temperatura de retração (min.) | 170°C |
| Temperatura de funcionamento contínuo | -55 ºC - + 200 ºC |
| Resistência à tração (N/mm2) | 19 |
| Alongamento na rutura (%) | 500 |
| Alteração do comprimento | -10 % max. |
| Resistência dieléctrica | 14 kV / mm |
| Resistência específica (Ohm x cm) | 10^12 |
| Inflamabilidade | auto-extinguível |
| Характеристика | Значение |
| Материал | Фторэластомер |
| Стена | Тонкостенные |
| Клей | Без внутреннего клея |
| Коэффициент усадки | 2 : 1 |
| Температура усадки (мин.) | 170°C |
| Непрерывная рабочая температура | -55 ºC - + 200 ºC |
| Прочность на разрыв (Н/мм2) | 19 |
| Удлинение при разрыве (%) | 500 |
| Изменение длины | -10 % max. |
| Диэлектрическая прочность | 14 kV / mm |
| Удельное сопротивление (Ом х см) | 10^12 |
| Воспламеняемость | Самозатухающий |
| Özellik | Değer |
| Malzeme | Floroelastomer |
| Duvarlar | Ince duvarlı |
| Tutkal | İç yapıştırıcı olmadan |
| Büzülme oranı | 2 : 1 |
| Sıcaklık daralma (min.) | 170°C |
| Sürekli çalışma sıcaklığı | -55 ºC - + 200 ºC |
| Çekme mukavemeti (N/mm2) | 19 |
| Kırılma uzaması (%) | 500 |
| Uzun değişikliği | -10 % max. |
| Dielektrik mukavemet | 14 kV / mm |
| Spesifik direnç (Ohm x cm) | 10^12 |
| Yanıcılık mı? | Kendi kendini söndürme |
| Eature | AlueCity in Alberta Canada |
| AZ ANYAK | Luoroelasztomer |
| Minden | Vágfalú |
| Lue | Belső ragasztóanyag nélkül |
| Hrinkage arány | 2 : 1 |
| Hrink hőmérséklete (minimum) | 170°C |
| A folyamatos üzemi hőmérséklet | -55 ºC - + 200 ºC |
| Szilószilársőség (/mm2) | 19 |
| Hosszúság szünetelés (%) | 500 |
| Hosszúsági változás | -10 % max. |
| IElectric erősség | 14 kV / mm |
| Speciális rezisztencia (hm x cm) | 10^12 |
| Felhúzódási képesség | Öntöltő |
| ویژگی ها | ارزش |
| مواد | فلوروالاستومر |
| دیوار | دیواره نازک |
| چسب ؟ | بدون چسب داخلی |
| نسبت انقباض | 2 : 1 |
| دمای کوچک شدن (دقیق) | 170°C |
| دمای کار مداوم | -55 ºC - + 200 ºC |
| مقاومت کششی (N/mm2) | 19 |
| کشیدگی در زمان شکستن (٪) | 500 |
| تغییر طول | -10 % max. |
| مقاومت دی الکتریک | 14 kV / mm |
| مقاومت خاص (اهم × سانتی متر) | 10^12 |
| قابل اشتعال | خودخاموش کردن |
| Functie | Waarde |
| Materiaal | Fluorelastomeer |
| Muur | Dunwandig |
| Lijm | Zonder lijm aan de binnenkant |
| Krimpverhouding | 2 : 1 |
| Krimptemperatuur (min.) | 170°C |
| Continue bedrijfstemperatuur | -55 ºC - + 200 ºC |
| Treksterkte (N/mm2) | 19 |
| Rek bij breuk (%) | 500 |
| Lengteverandering | -10 % max. |
| Diëlektrische sterkte | 14 kV / mm |
| Specifieke weerstand (Ohm x cm) | 10^12 |
| Ontvlambaarheid | zelfdovend |
| Caracteristică | Valoare |
| Material | Fluoroelastomer |
| Perete | Cu pereți subțiri |
| Lipici | Fără adeziv interior |
| Raportul de contracție | 2 : 1 |
| Temperatura de contracție (min.) | 170°C |
| Temperatura de funcționare continuă | -55 ºC - + 200 ºC |
| Rezistența la tracțiune (N/mm2) | 19 |
| Alungirea la rupere (%) | 500 |
| Schimbare de lungime | -10 % max. |
| Rezistența dielectrică | 14 kV / mm |
| Rezistența specifică (Ohm x cm) | 10^12 |
| Inflamabilitate | autoextincție |
| Ominaisuus | Arvo |
| Materiaali | Fluoroelastomeeri |
| Seinä | Ohutseinäiset |
| Liima | Ilman sisäpuolen liimaa |
| Kutistumissuhde | 2 : 1 |
| Kutistumislämpötila (min.) | 170°C |
| Jatkuva käyttölämpötila | -55 ºC - + 200 ºC |
| Vetolujuus (N/mm2) | 19 |
| Murtovenymä (%) | 500 |
| Pituuden muutos | -10 % max. |
| Dielektrinen lujuus | 14 kV / mm |
| Ominaisvastus (Ohm x cm) | 10^12 |
| Syttyvyys | itsestään sammuva |
| Funkcia | Hodnota |
| Materiál | Fluoroelastomér |
| Stena | Tenkostenné |
| Lepidlo | Bez vnútorného lepidla |
| Pomer zmrštenia | 2 : 1 |
| Teplota zmršťovania (min.) | 170°C |
| Trvalá prevádzková teplota | -55 ºC - + 200 ºC |
| Pevnosť v ťahu (N/mm2) | 19 |
| Predĺženie pri pretrhnutí (%) | 500 |
| Zmena dĺžky | -10 % max. |
| Dielektrická pevnosť | 14 kV / mm |
| Špecifický odpor (Ohm x cm) | 10^12 |
| Horľavosť | samozhášacie |
| Funktion | Værdi |
| Materiale | Fluorelastomer |
| Væg | Tyndvægget |
| Lim | Uden indvendigt klæbemiddel |
| Krympningsgrad | 2 : 1 |
| Krympetemperatur (min.) | 170°C |
| Kontinuerlig driftstemperatur | -55 ºC - + 200 ºC |
| Trækstyrke (N/mm2) | 19 |
| Forlængelse ved brud (%) | 500 |
| Ændring af længde | -10 % max. |
| Dielektrisk styrke | 14 kV / mm |
| Specifik modstand (Ohm x cm) | 10^12 |
| Brandfarlighed | selvslukkende |
| Χαρακτηριστικό γνώρισμα | Αξία |
| Υλικό | Φθοριοελαστομερές |
| Τοίχος | Λεπτότοιχα |
| Κόλλα | Χωρίς εσωτερική κόλλα |
| Αναλογία συρρίκνωσης | 2 : 1 |
| Θερμοκρασία συρρίκνωσης (min.) | 170°C |
| Συνεχής θερμοκρασία λειτουργίας | -55 ºC - + 200 ºC |
| Αντοχή σε εφελκυσμό (N/mm2) | 19 |
| Επιμήκυνση κατά τη θραύση (%) | 500 |
| Αλλαγή μήκους | -10 % max. |
| Διηλεκτρική αντοχή | 14 kV / mm |
| Ειδική αντίσταση (Ohm x cm) | 10^12 |
| Αναφλεξιμότητα | αυτοσβενόμενο |
| Функции | Стойност |
| Материал | Флуороеластомер |
| Стена | Тънкостенни |
| Лепило | Без вътрешно лепило |
| Коефициент на свиване | 2 : 1 |
| Температура на свиване (мин.) | 170°C |
| Непрекъсната работна температура | -55 ºC - + 200 ºC |
| Якост на опън (N/mm2) | 19 |
| Удължение при скъсване (%) | 500 |
| Промяна на дължината | -10 % max. |
| Диелектрична якост | 14 kV / mm |
| Специфично съпротивление (Ohm x cm) | 10^12 |
| Запалимост | самозагасващ се |
| Funktion | Värde |
| Material | Fluorelastomer |
| Vägg | Tunnväggig |
| Lim | Utan självhäftande insida |
| Krympningsgrad | 2 : 1 |
| Krymptemperatur (min.) | 170°C |
| Kontinuerlig driftstemperatur | -55 ºC - + 200 ºC |
| Draghållfasthet (N/mm2) | 19 |
| Töjning vid brott (%) | 500 |
| Längdförändring | -10 % max. |
| Dielektrisk hållfasthet | 14 kV / mm |
| Specifikt motstånd (Ohm x cm) | 10^12 |
| Brandfarlighet | självsläckande |
| Funkcija | Vrednost |
| Material | Fluoroelastomer |
| Stena | Tankostenski |
| Lepilo | Brez notranjega lepila |
| Razmerje krčenja | 2 : 1 |
| Temperatura krčenja (min.) | 170°C |
| Trajna delovna temperatura | -55 ºC - + 200 ºC |
| Natezna trdnost (N/mm2) | 19 |
| Podaljšek ob pretrgu (%) | 500 |
| Sprememba dolžine | -10 % max. |
| Dielektrična trdnost | 14 kV / mm |
| Specifična upornost (Ohm x cm) | 10^12 |
| Vnetljivost | samougasljivi |
| Funktsioon | Väärtus |
| Materjal | Fluoroelastomeer |
| Seina | Õhukesed seinad |
| Liim | Ilma sisemise liimita |
| Kahanemise suhe | 2 : 1 |
| Kahanemistemperatuur (min.) | 170°C |
| Pidev töötemperatuur | -55 ºC - + 200 ºC |
| Tõmbetugevus (N/mm2) | 19 |
| Pikendus murdumisel (%) | 500 |
| Pikkuse muutus | -10 % max. |
| Dielektriline tugevus | 14 kV / mm |
| Eritakistus (Ohm x cm) | 10^12 |
| Põletatavus | isekustuv |
| Funkcija | Vertė |
| Medžiaga | Fluoroelastomeras |
| Siena | Plonasienis |
| Klijai | Be vidinių klijų |
| Susitraukimo santykis | 2 : 1 |
| Sutraukimo temperatūra (min.) | 170°C |
| Nuolatinė darbinė temperatūra | -55 ºC - + 200 ºC |
| Tempimo stipris (N/mm2) | 19 |
| Pailgėjimas nutrūkus (%) | 500 |
| Ilgio pokytis | -10 % max. |
| Dielektrinis stipris | 14 kV / mm |
| Savitoji varža (Ohm x cm) | 10^12 |
| Degumas | savaime užgęstantis |
| Funkcija | Vērtība |
| Materiāls | Fluoroelastomērs |
| Siena | Plānsienu |
| Līme | Bez iekšējās līmes |
| Saraušanās koeficients | 2 : 1 |
| Samazināšanas temperatūra (min.) | 170°C |
| Pastāvīgā darba temperatūra | -55 ºC - + 200 ºC |
| Stiepes izturība (N/mm2) | 19 |
| Pagarinājums pārraušanas brīdī (%) | 500 |
| Garuma izmaiņas | -10 % max. |
| Dielektriskā izturība | 14 kV / mm |
| Īpatnējā pretestība (Ohm x cm) | 10^12 |
| Uzliesmojamība | pašdzēsošs |
| Eigenschaft | Wert |
| Material | Fluorelastomer |
| Wandung | dünnwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 2 : 1 |
| Schrumpftemperatur (min.) | 170°C |
| Dauerbetriebstemperatur | -55 ºC - + 200 ºC |
| Zugfestigkeit (N/mm2) | 19 |
| Bruchdehnung (%) | 500 |
| Längenänderung | -10 % max. |
| Durchschlagfestigkeit | 14 kV / mm |
| Spezifischer Widerstand (Ohm x cm) | 10^12 |
| Brennbarkeit | selbstverlöschend |
| Eigenschaft | Wert |
| Material | Fluorelastomer |
| Wandung | dünnwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 2 : 1 |
| Schrumpftemperatur (min.) | 170°C |
| Dauerbetriebstemperatur | -55 ºC - + 200 ºC |
| Zugfestigkeit (N/mm2) | 19 |
| Bruchdehnung (%) | 500 |
| Längenänderung | -10 % max. |
| Durchschlagfestigkeit | 14 kV / mm |
| Spezifischer Widerstand (Ohm x cm) | 10^12 |
| Brennbarkeit | selbstverlöschend |
Shrink tubing thin-walled fluoroelastomer VITON-E - Technical data sheet for download
For detailed information on our thin-walled fluoroelastomer VITON-E heat shrink tubing, we offer you a comprehensive technical data sheet for download. This data sheet contains all the important technical specifications, including material composition, temperature resistance and electrical insulation properties. You will also find detailed information on the dimensions and availability of our products.
Download: Technical data sheet
Do you have any questions about our offer?
Shrink tubing thin-walled fluoroelastomer VITON-E
Thin-walled VITON-E heat-shrink tubing for industrial applications
Welcome to your dealer for heat shrinkable tubing thin-walled fluoroelastomer VITON-E. If you are looking for high-quality and heat-resistant heat shrink tubing, then you have come to the right place. Our thin-walled heat shrink tubing made of VITON-E is the perfect solution for many industrial applications and offers optimum protection for your cables.
Heat-resistant thin-walled heat shrink tubing VITON-E
Our heat-resistant thin-wall heat shrink tubing made from VITON-E is ideal for environments with high temperatures. It can withstand extreme conditions while providing excellent insulation. Whether you need heat shrink tubing for industrial applications or special projects, our product will meet your requirements.Thin-walled VITON-E heat shrink tubing for cable protection
Cable protection is an important aspect in many areas. With our thin-walled VITON-E heat shrink tubing, you can ensure that your cables are optimally protected. This heat-shrink tubing is not only flexible, but also robust and durable. It offers reliable protection against external influences and therefore increases the service life of your cables.Thin-walled VITON-E heat shrink tubing for industrial applications
In industry, it is crucial to rely on reliable products. Our thin-walled VITON-E heat shrink tubing has been specially developed for industrial applications. It offers excellent chemical resistance and is resistant to oil and fuels. This makes it the ideal choice for a wide range of industrial applications.Your reliable dealer
As your reliable distributor for shrink tubing thin-walled fluoroelastomer VITON-E, we not only offer you high-quality products, but also first-class service. We are always available to answer your questions and help you find the right solution for your requirements. You can rely on our expertise and experience.Conclusion
If you are looking for heat shrink tubing thin-walled fluoroelastomer VITON-E, then you have come to the right place. We offer you heat-resistant thin-walled heat shrink tubing VITON-E, which is perfect for cable protection and industrial applications. Contact us today and let us convince you of our high-quality products.What can we do for you?
Contact our product experts
What can we do for you?
Contact our product experts
Oliver Bürli
Head of Hose Technology, Sales and Product Management
Do you have any questions about:
Shrink tubing thin-walled fluoroelastomer VITON-E
Just send us a short message and we will be happy to answer your questions by phone or e-mail.
Questions?
Write to us!
Would you like to find out more about our high-quality products?
We have a large warehouse, short delivery times and duty-free delivery!
Do not hesitate to contact us, we will be happy toadvise you personally.
Do not hesitate to contact us, we will be happy toadvise you personally.
Your contact persons
Request a callback
Would you like a personal telephone consultation?
Simply fill out the form and we will get back to you.
What are the advantages of using DC voltage transformers compared to AC voltage transformers?
What are the advantages of using DC voltage transformers compared to AC voltage transformers?
X
Our hoses at a glance
Because the part makes the price. Just enter your email and we will send you our catalog free of charge.
Request catalog
Frequently asked questions about shrink tubing thin-walled fluoroelastomer VITON-E
1. what are the main properties of shrink tubing thin-walled fluoroelastomer VITON-E?
- Heat resistant
- Chemically resistant
- Flexible and durable
- Provides excellent insulation
- Resistant to oil and fuels
2. which applications is thin-walled VITON-E heat shrink tubing suitable for?
Thin-walled VITON-E heat shrink tubing is ideal for industrial applications where high temperatures and chemical resistance are required. It also provides excellent protection for cables in demanding environments.
3. how to install thin-walled shrink tubing made of VITON-E?
- Cut the heat-shrink tubing to the desired length.
- Place the heat-shrink tubing over the area to be protected.
- Heat the heat-shrink tubing evenly with a heat gun or similar device until it has contracted completely and is firmly in place.
4. What are the advantages of using thin-walled fluoroelastomer VITON-E shrink tubing?
The use of thin-walled shrink tubing made from VITON-E offers numerous advantages, such as
- High temperature resistance
- Protection against chemical influences
- Extended service life of cables
- Flexibility and easy handling
- Reliable protection in industrial applications
5.Viton tube - high-performance heat-shrink tubing
Viton tube is a first-class choice for applications requiring the highest levels of chemical and thermal resistance. Thanks to its outstanding properties, it is used in various industrial sectors, including the chemical, automotive, pharmaceutical and mechanical engineering industries.
Properties of the Viton tube:
Areas of application:
Thanks to its unique properties, the viton tube is ideal for:
Properties of the Viton tube:
- Very good chemical resistance: the Viton hose resists a wide range of aggressive chemicals, oils and fuels. This makes it ideal for use in demanding environments.
- Temperature resistance: With a working range of -25°C to +200°C, the hose remains reliable and flexible even at extreme temperatures.
- Color: The Viton hose is available in black, which makes it resistant to UV radiation and external influences.
- Hardness: With a hardness of 75° ± 5° Shore A, the hose offers the perfect balance between flexibility and stability.
Areas of application:
Thanks to its unique properties, the viton tube is ideal for:
- Chemical processes: Resistant to acids, bases and other aggressive substances.
- High temperature applications: Ideal for heating and cooling systems, seals and delivery lines.
- Fuel and oil transportation: Resistant to mineral oils, fuels and synthetic substances.
Learn more
