Shrink tubing thin-walled PVDF Kynar dealers
- Large selection of heat shrink tubing thin-walled PVDF Kynar
- For the electrical engineering and electronics business
- A direct line instead of a waiting loop - we are there for you
Over 60 years of experience
in the electrical engineering and electronics industry
Short delivery times
through optimized warehousing
Germany and Switzerland
Dual location strength and reliability
Shrink tubing thin-walled PVDF Kynar in our range:
In our range you will find a variety of sizes, colors and materials that meet all industry-standard specifications and are suitable for precise applications. Each product in our range has been carefully selected to ensure the highest quality and performance.
Below you will find detailed tables with sizes and technical data for each of our hoses. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right hose for your specific requirements.
Below you will find detailed tables with sizes and technical data for each of our hoses. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right hose for your specific requirements.
Shrink tubing thin-walled PVDF Kynar - Size chart
Shrink tubing thin-walled PVDF Kynar - Technical data
| Eigenschaft | Wert |
| Material | PVC |
| Wandung | dünnwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 2 : 1 |
| Schrumpftemperatur (min.) | 160°C |
| Dauerbetriebstemperatur | -55 ºC - + 175 ºC |
| Zugfestigkeit (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Längenänderung | -10 % max. |
| Durchschlagfestigkeit | 11 kV / mm |
| Spezifischer Widerstand (Ohm x cm) | 10^12 |
| Brennbarkeit | selbstverlöschend |
| Feature | Value |
| Material | PVC |
| Wall | thin-walled |
| Glue | without inside adhesive |
| Shrinkage ratio | 2 : 1 |
| Shrink temperature (min.) | 160°C |
| Continuous operating temperature | -55 ºC - + 175 ºC |
| Tensile strength (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Length change | -10 % max. |
| Dielectric strength | 11 kV / mm |
| Specific resistance (Ohm x cm) | 10^12 |
| Flammability | self-extinguishing |
| Característica | Valor |
| Material | PVC |
| Pared | Paredes finas |
| Pegamento | Sin adhesivo interior |
| Índice de contracción | 2 : 1 |
| Temperatura de retracción (mín.) | 160°C |
| Temperatura de funcionamiento continuo | -55 ºC - + 175 ºC |
| Resistencia a la tracción (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Cambio de longitud | -10 % max. |
| Rigidez dieléctrica | 11 kV / mm |
| Resistencia específica (Ohm x cm) | 10^12 |
| Inflamabilidad | autoextinguible |
| Cecha | Wartość |
| Materiał | PVC |
| Ściana | Cienkościenne |
| Klej | Bez wewnętrznego kleju |
| Współczynnik skurczu | 2 : 1 |
| Temperatura obkurczania (min.) | 160°C |
| Temperatura pracy ciągłej | -55 ºC - + 175 ºC |
| Wytrzymałość na rozciąganie (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Zmiana długości | -10 % max. |
| Wytrzymałość dielektryczna | 11 kV / mm |
| Opór właściwy (Ohm x cm) | 10^12 |
| Palność | samogasnący |
| Propriété | Valeur |
| Matériau | PVC |
| Paroi | à paroi mince |
| Colle | sans adhésif intérieur |
| Rapport de rétraction | 2 : 1 |
| Température de rétraction (min.) | 160°C |
| Température de fonctionnement continu | -55 ºC - + 175 ºC |
| Résistance à la traction (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Changement de longueur | -10 % max. |
| Rigidité diélectrique | 11 kV / mm |
| Résistance spécifique (Ohm x cm) | 10^12 |
| Inflammabilité | auto-extinguible |
| Caratteristica | Valore |
| Materiale | PVC |
| Muro | A parete sottile |
| Colla | Senza adesivo interno |
| Rapporto di restringimento | 2 : 1 |
| Temperatura di restringimento (min.) | 160°C |
| Temperatura di esercizio continua | -55 ºC - + 175 ºC |
| Resistenza alla trazione (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Variazione della lunghezza | -10 % max. |
| Rigidità dielettrica | 11 kV / mm |
| Resistenza specifica (Ohm x cm) | 10^12 |
| Infiammabilità | autoestinguente |
| الميزة | القيمة |
| المواد | PVC |
| الحائط | رقيقة الجدران |
| الغراء | بدون لاصق داخل |
| نسبة الانكماش | 2 : 1 |
| تقلص درجة الحرارة (دقيقة) | 160°C |
| درجة حرارة التشغيل المستمرة | -55 ºC - + 175 ºC |
| قوة الشد (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| تغيير الطول | -10 % max. |
| قوة عازل | 11 kV / mm |
| مقاومة محددة (أوم × سم) | 10^12 |
| قابلية للاشتعال | إطفاء ذاتي |
| 특징 | 값 |
| 재료 | PVC |
| 벽 | 얇은 벽 |
| 접착제 | 내부 접착제가 없다 |
| 수축률 | 2 : 1 |
| 수축 온도(min.) | 160°C |
| 연속 작동 온도 | -55 ºC - + 175 ºC |
| 인장 강도(N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| 길이 변경 | -10 % max. |
| 유전체 강도 | 11 kV / mm |
| 비저항 (Ohm x cm) | 10^12 |
| 가연성 | 자기 소화 |
| 特徴 | 価値 |
| 素材 | PVC |
| 壁 | 薄肉 |
| 接着剤 | 内側接着剤なし |
| 収縮率 | 2 : 1 |
| 収縮温度（最低） | 160°C |
| 連続使用温度 | -55 ºC - + 175 ºC |
| 引張強さ (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| 長さの変化 | -10 % max. |
| 絶縁耐力 | 11 kV / mm |
| 比抵抗（オーム×cm） | 10^12 |
| 引火性 | 自己消火性 |
| 特征 | 价值 |
| 材料 | PVC |
| 墙 | 薄壁的 |
| 胶合 | 无内胶 |
| 收缩率 | 2 : 1 |
| 收缩温度（最小值） | 160°C |
| 连续工作温度 | -55 ºC - + 175 ºC |
| 抗拉强度(N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| 长度变化 | -10 % max. |
| 介电强度 | 11 kV / mm |
| 比电阻（欧姆×厘米） | 10^12 |
| 易燃性 | 自熄的 |
| Funkce? | Hodnota? |
| Materiál? | PVC |
| Zdi? | Tenkostěnná |
| Plepidlo? | Bez vnitřního lepidla |
| Poměr smršťování | 2 : 1 |
| Teplota smršťování (min.) | 160°C |
| Kontinuální provozní teplota | -55 ºC - + 175 ºC |
| Pevnost v tahu (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Změna délky | -10 % max. |
| Dielektrická pevnost | 11 kV / mm |
| Specifický odpor (Ohm x cm) | 10^12 |
| Hořlavost? | Samočinné vyhasení |
| Característica | Valor |
| Material | PVC |
| Parede | Paredes finas |
| Cola | Sem adesivo interior |
| Rácio de retração | 2 : 1 |
| Temperatura de retração (min.) | 160°C |
| Temperatura de funcionamento contínuo | -55 ºC - + 175 ºC |
| Resistência à tração (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Alteração do comprimento | -10 % max. |
| Resistência dieléctrica | 11 kV / mm |
| Resistência específica (Ohm x cm) | 10^12 |
| Inflamabilidade | auto-extinguível |
| Характеристика | Значение |
| Материал | PVC |
| Стена | Тонкостенные |
| Клей | Без внутреннего клея |
| Коэффициент усадки | 2 : 1 |
| Температура усадки (мин.) | 160°C |
| Непрерывная рабочая температура | -55 ºC - + 175 ºC |
| Прочность на разрыв (Н/мм2) | 45 |
| Bruchdehnung (%) | 350 |
| Изменение длины | -10 % max. |
| Диэлектрическая прочность | 11 kV / mm |
| Удельное сопротивление (Ом х см) | 10^12 |
| Воспламеняемость | Самозатухающий |
| Özellik | Değer |
| Malzeme | PVC |
| Duvarlar | Ince duvarlı |
| Tutkal | İç yapıştırıcı olmadan |
| Büzülme oranı | 2 : 1 |
| Sıcaklık daralma (min.) | 160°C |
| Sürekli çalışma sıcaklığı | -55 ºC - + 175 ºC |
| Çekme mukavemeti (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Uzun değişikliği | -10 % max. |
| Dielektrik mukavemet | 11 kV / mm |
| Spesifik direnç (Ohm x cm) | 10^12 |
| Yanıcılık mı? | Kendi kendini söndürme |
| Eature | AlueCity in Alberta Canada |
| AZ ANYAK | PVC |
| Minden | Vágfalú |
| Lue | Belső ragasztóanyag nélkül |
| Hrinkage arány | 2 : 1 |
| Hrink hőmérséklete (minimum) | 160°C |
| A folyamatos üzemi hőmérséklet | -55 ºC - + 175 ºC |
| Szilószilársőség (/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Hosszúsági változás | -10 % max. |
| IElectric erősség | 11 kV / mm |
| Speciális rezisztencia (hm x cm) | 10^12 |
| Felhúzódási képesség | Öntöltő |
| ویژگی ها | ارزش |
| مواد | PVC |
| دیوار | دیواره نازک |
| چسب ؟ | بدون چسب داخلی |
| نسبت انقباض | 2 : 1 |
| دمای کوچک شدن (دقیق) | 160°C |
| دمای کار مداوم | -55 ºC - + 175 ºC |
| مقاومت کششی (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| تغییر طول | -10 % max. |
| مقاومت دی الکتریک | 11 kV / mm |
| مقاومت خاص (اهم × سانتی متر) | 10^12 |
| قابل اشتعال | خودخاموش کردن |
| Functie | Waarde |
| Materiaal | PVC |
| Muur | Dunwandig |
| Lijm | Zonder lijm aan de binnenkant |
| Krimpverhouding | 2 : 1 |
| Krimptemperatuur (min.) | 160°C |
| Continue bedrijfstemperatuur | -55 ºC - + 175 ºC |
| Treksterkte (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Lengteverandering | -10 % max. |
| Diëlektrische sterkte | 11 kV / mm |
| Specifieke weerstand (Ohm x cm) | 10^12 |
| Ontvlambaarheid | zelfdovend |
| Caracteristică | Valoare |
| Material | PVC |
| Perete | Cu pereți subțiri |
| Lipici | Fără adeziv interior |
| Raportul de contracție | 2 : 1 |
| Temperatura de contracție (min.) | 160°C |
| Temperatura de funcționare continuă | -55 ºC - + 175 ºC |
| Rezistența la tracțiune (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Schimbare de lungime | -10 % max. |
| Rezistența dielectrică | 11 kV / mm |
| Rezistența specifică (Ohm x cm) | 10^12 |
| Inflamabilitate | autoextincție |
| Ominaisuus | Arvo |
| Materiaali | PVC |
| Seinä | Ohutseinäiset |
| Liima | Ilman sisäpuolen liimaa |
| Kutistumissuhde | 2 : 1 |
| Kutistumislämpötila (min.) | 160°C |
| Jatkuva käyttölämpötila | -55 ºC - + 175 ºC |
| Vetolujuus (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Pituuden muutos | -10 % max. |
| Dielektrinen lujuus | 11 kV / mm |
| Ominaisvastus (Ohm x cm) | 10^12 |
| Syttyvyys | itsestään sammuva |
| Funkcia | Hodnota |
| Materiál | PVC |
| Stena | Tenkostenné |
| Lepidlo | Bez vnútorného lepidla |
| Pomer zmrštenia | 2 : 1 |
| Teplota zmršťovania (min.) | 160°C |
| Trvalá prevádzková teplota | -55 ºC - + 175 ºC |
| Pevnosť v ťahu (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Zmena dĺžky | -10 % max. |
| Dielektrická pevnosť | 11 kV / mm |
| Špecifický odpor (Ohm x cm) | 10^12 |
| Horľavosť | samozhášacie |
| Funktion | Værdi |
| Materiale | PVC |
| Væg | Tyndvægget |
| Lim | Uden indvendigt klæbemiddel |
| Krympningsgrad | 2 : 1 |
| Krympetemperatur (min.) | 160°C |
| Kontinuerlig driftstemperatur | -55 ºC - + 175 ºC |
| Trækstyrke (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Ændring af længde | -10 % max. |
| Dielektrisk styrke | 11 kV / mm |
| Specifik modstand (Ohm x cm) | 10^12 |
| Brandfarlighed | selvslukkende |
| Χαρακτηριστικό γνώρισμα | Αξία |
| Υλικό | PVC |
| Τοίχος | Λεπτότοιχα |
| Κόλλα | Χωρίς εσωτερική κόλλα |
| Αναλογία συρρίκνωσης | 2 : 1 |
| Θερμοκρασία συρρίκνωσης (min.) | 160°C |
| Συνεχής θερμοκρασία λειτουργίας | -55 ºC - + 175 ºC |
| Αντοχή σε εφελκυσμό (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Αλλαγή μήκους | -10 % max. |
| Διηλεκτρική αντοχή | 11 kV / mm |
| Ειδική αντίσταση (Ohm x cm) | 10^12 |
| Αναφλεξιμότητα | αυτοσβενόμενο |
| Функции | Стойност |
| Материал | PVC |
| Стена | Тънкостенни |
| Лепило | Без вътрешно лепило |
| Коефициент на свиване | 2 : 1 |
| Температура на свиване (мин.) | 160°C |
| Непрекъсната работна температура | -55 ºC - + 175 ºC |
| Якост на опън (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Промяна на дължината | -10 % max. |
| Диелектрична якост | 11 kV / mm |
| Специфично съпротивление (Ohm x cm) | 10^12 |
| Запалимост | самозагасващ се |
| Funktion | Värde |
| Material | PVC |
| Vägg | Tunnväggig |
| Lim | Utan självhäftande insida |
| Krympningsgrad | 2 : 1 |
| Krymptemperatur (min.) | 160°C |
| Kontinuerlig driftstemperatur | -55 ºC - + 175 ºC |
| Draghållfasthet (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Längdförändring | -10 % max. |
| Dielektrisk hållfasthet | 11 kV / mm |
| Specifikt motstånd (Ohm x cm) | 10^12 |
| Brandfarlighet | självsläckande |
| Funkcija | Vrednost |
| Material | PVC |
| Stena | Tankostenski |
| Lepilo | Brez notranjega lepila |
| Razmerje krčenja | 2 : 1 |
| Temperatura krčenja (min.) | 160°C |
| Trajna delovna temperatura | -55 ºC - + 175 ºC |
| Natezna trdnost (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Sprememba dolžine | -10 % max. |
| Dielektrična trdnost | 11 kV / mm |
| Specifična upornost (Ohm x cm) | 10^12 |
| Vnetljivost | samougasljivi |
| Funktsioon | Väärtus |
| Materjal | PVC |
| Seina | Õhukesed seinad |
| Liim | Ilma sisemise liimita |
| Kahanemise suhe | 2 : 1 |
| Kahanemistemperatuur (min.) | 160°C |
| Pidev töötemperatuur | -55 ºC - + 175 ºC |
| Tõmbetugevus (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Pikkuse muutus | -10 % max. |
| Dielektriline tugevus | 11 kV / mm |
| Eritakistus (Ohm x cm) | 10^12 |
| Põletatavus | isekustuv |
| Funkcija | Vertė |
| Medžiaga | PVC |
| Siena | Plonasienis |
| Klijai | Be vidinių klijų |
| Susitraukimo santykis | 2 : 1 |
| Sutraukimo temperatūra (min.) | 160°C |
| Nuolatinė darbinė temperatūra | -55 ºC - + 175 ºC |
| Tempimo stipris (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Ilgio pokytis | -10 % max. |
| Dielektrinis stipris | 11 kV / mm |
| Savitoji varža (Ohm x cm) | 10^12 |
| Degumas | savaime užgęstantis |
| Funkcija | Vērtība |
| Materiāls | PVC |
| Siena | Plānsienu |
| Līme | Bez iekšējās līmes |
| Saraušanās koeficients | 2 : 1 |
| Samazināšanas temperatūra (min.) | 160°C |
| Pastāvīgā darba temperatūra | -55 ºC - + 175 ºC |
| Stiepes izturība (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Garuma izmaiņas | -10 % max. |
| Dielektriskā izturība | 11 kV / mm |
| Īpatnējā pretestība (Ohm x cm) | 10^12 |
| Uzliesmojamība | pašdzēsošs |
| Eigenschaft | Wert |
| Material | PVC |
| Wandung | dünnwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 2 : 1 |
| Schrumpftemperatur (min.) | 160°C |
| Dauerbetriebstemperatur | -55 ºC - + 175 ºC |
| Zugfestigkeit (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Längenänderung | -10 % max. |
| Durchschlagfestigkeit | 11 kV / mm |
| Spezifischer Widerstand (Ohm x cm) | 10^12 |
| Brennbarkeit | selbstverlöschend |
| Eigenschaft | Wert |
| Material | PVC |
| Wandung | dünnwandig |
| Kleber | ohne Innenkleber |
| Schrumpfverhältnis | 2 : 1 |
| Schrumpftemperatur (min.) | 160°C |
| Dauerbetriebstemperatur | -55 ºC - + 175 ºC |
| Zugfestigkeit (N/mm2) | 45 |
| Bruchdehnung (%) | 350 |
| Längenänderung | -10 % max. |
| Durchschlagfestigkeit | 11 kV / mm |
| Spezifischer Widerstand (Ohm x cm) | 10^12 |
| Brennbarkeit | selbstverlöschend |
Shrink tubing thin-walled PVDF Kynar - Technical data sheet for download
For detailed information on our thin-walled PVDF Kynar heat shrink tubing, we offer you a comprehensive technical data sheet for download. This data sheet contains all the important technical specifications, including material composition, temperature resistance and electrical insulation properties. You will also find detailed information on the dimensions and availability of our products.
Download: Technical data sheet
Do you have any questions about our offer?
Shrink tubing thin-walled PVDF Kynar
PVDF Kynar heat shrink tubing, thin-walled for high-temperature applications
Are you looking for a reliable dealer of shrink tubing thin-walled PVDF Kynar? Then you've come to the right place! We offer you a wide selection of high-quality thin-walled shrink tubing PVDF Kynar, which is perfect for a wide range of applications.
Our thin-walled PVDF Kynar shrink tubing is the ideal solution for medical devices. Thanks to its high quality and reliability, this heat shrink tubing is highly valued in the medical industry. If you need heat shrink tubing for medical devices, you can rely on our range.
Our thin-walled PVDF Kynar heat shrink tubing is also ideal for high-temperature applications. It can withstand extreme temperatures and offers outstanding resistance. Whether you use it in industry or for other demanding applications, our heat shrink tubing will meet your requirements.
For electrical insulation, our thin-walled PVDF Kynar heat shrink tubing is also an excellent choice. It provides reliable insulation and protection, making it ideal for use in electrical equipment and installations.
As an experienced distributor of thin-walled PVDF Kynar heat shrink tubing, we know exactly what is important. We not only offer you a large selection, but also expert advice. Our team is on hand to help you choose the right heat shrink tubing.
Benefit from our many years of experience and comprehensive expertise. With us, you will find the right heat shrink tubing for your specific requirements. Order today and see the quality of our range for yourself.
To summarize: If you are looking for thin-walled PVDF Kynar heat shrink tubing for medical devices, high-temperature applications or electrical insulation, then we are your ideal partner. We offer you everything you need to successfully implement your projects.
Do not hesitate to contact us. We look forward to helping you and supplying you with high-quality thin-walled PVDF Kynar heat shrink tubing. Your reliable dealer is waiting for you!
Our thin-walled PVDF Kynar shrink tubing is the ideal solution for medical devices. Thanks to its high quality and reliability, this heat shrink tubing is highly valued in the medical industry. If you need heat shrink tubing for medical devices, you can rely on our range.
Our thin-walled PVDF Kynar heat shrink tubing is also ideal for high-temperature applications. It can withstand extreme temperatures and offers outstanding resistance. Whether you use it in industry or for other demanding applications, our heat shrink tubing will meet your requirements.
For electrical insulation, our thin-walled PVDF Kynar heat shrink tubing is also an excellent choice. It provides reliable insulation and protection, making it ideal for use in electrical equipment and installations.
As an experienced distributor of thin-walled PVDF Kynar heat shrink tubing, we know exactly what is important. We not only offer you a large selection, but also expert advice. Our team is on hand to help you choose the right heat shrink tubing.
Benefit from our many years of experience and comprehensive expertise. With us, you will find the right heat shrink tubing for your specific requirements. Order today and see the quality of our range for yourself.
To summarize: If you are looking for thin-walled PVDF Kynar heat shrink tubing for medical devices, high-temperature applications or electrical insulation, then we are your ideal partner. We offer you everything you need to successfully implement your projects.
Do not hesitate to contact us. We look forward to helping you and supplying you with high-quality thin-walled PVDF Kynar heat shrink tubing. Your reliable dealer is waiting for you!
What can we do for you?
Contact our product experts
What can we do for you?
Contact our product experts
Oliver Bürli
Head of Hose Technology, Sales and Product Management
Do you have any questions about:
Shrink tubing thin-walled PVDF Kynar
Just send us a short message and we will be happy to answer your questions by phone or e-mail.
Questions?
Write to us!
Would you like to find out more about our high-quality products?
We have a large warehouse, short delivery times and duty-free delivery!
Do not hesitate to contact us, we will be happy toadvise you personally.
Do not hesitate to contact us, we will be happy toadvise you personally.
Your contact persons
Request a callback
Would you like a personal telephone consultation?
Simply fill out the form and we will get back to you.
What are the advantages of using DC voltage transformers compared to AC voltage transformers?
What are the advantages of using DC voltage transformers compared to AC voltage transformers?
X
Our hoses at a glance
Because the part makes the price. Just enter your email and we will send you our catalog free of charge.
Request catalog
Frequently asked questions about shrink tubing thin-walled PVDF Kynar
1. what is thin-walled PVDF Kynar heat shrink tubing and what is it used for?
Shrink tubing thin-walled PVDF Kynar is a special plastic tubing that contracts when exposed to heat and forms a tight, protective sheath around cables or other objects. It is often used for:
- Electrical insulation
- Protection of medical devices
- High temperature applications
- Protection against abrasion and mechanical stress
2. What are the advantages of thin-walled PVDF Kynar heat shrink tubing?
- High temperature resistance
- Excellent chemical resistance
- Good electrical insulation properties
- High abrasion resistance
- Long durability
3. how is heat shrinkable tubing thin-walled PVDF Kynar used?
The shrink tubing is pulled over the object to be protected and then shrunk with heat, usually using a heat gun. The tubing adapts closely to the shape of the object and forms a firm, protective cover.
4. which industries is heat shrink tubing thin-walled PVDF Kynar suitable for?
Shrink tubing thin-walled PVDF Kynar is versatile and is used in various industries, including:
- Medical technology
- Electronics and electrical industry
- automotive industry
- Aerospace industry
- Chemical industry
5. what sizes and colors are available?
The thin-walled PVDF Kynar heat shrink tubing is available in various sizes to suit different applications. Tubing diameters typically vary from a few millimeters to several centimeters. Colors can also vary, with black, clear and various shades available to meet specific marking requirements.
