Shrink tubing thin-walled transparent with internal adhesive Retailer
- Large selection of shrink tubing thin-walled transparent with internal adhesive
- For the electrical engineering and electronics business
- A direct line instead of a waiting loop - we are there for you
Over 60 years of experience
in the electrical engineering and electronics industry
Short delivery times
through optimized warehousing
Germany and Switzerland
Dual location strength and reliability
Shrink tubing thin-walled transparent with inner adhesive in our range:
In our range you will find a variety of sizes, colors and materials that meet all industry-standard specifications and are suitable for precise applications. Each product in our range has been carefully selected to ensure the highest quality and performance.
Below you will find detailed tables with sizes and technical data for each of our hoses. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right hose for your specific requirements.
Below you will find detailed tables with sizes and technical data for each of our hoses. These tables provide you with all the important information at a glance, including diameter, temperature range and material properties. This way you can ensure that you find the right hose for your specific requirements.
Shrink tubing thin-walled transparent with inner adhesive - Size chart SPS-300 / 3 : 1
Shrink tubing thin-walled transparent with internal adhesive - Size chart SPS-400 / 4 : 1
Shrink tubing thick-walled transparent with inner adhesive - Technical data
| Eigenschaft | Wert |
| Material | Polyolefin |
| Wandung | dünnwandig |
| Kleber | mit Innenkleber |
| Schrumpfverhältnis | 3 : 1 |
| Schrumpftemperatur (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Zugfestigkeit | 12 |
| Bruchdehnung (%) | 300 |
| Längenänderung | – 8 % max. |
| Durchschlagfestigkeit | 15 kV / mm |
| Spezifischer Widerstand (Ohm x cm) | 10^14 |
| Feature | Value |
| Material | Polyolefin |
| Wall | thin-walled |
| Glue | with inside adhesive |
| Shrinkage ratio | 3 : 1 |
| Shrink temperature (min.) | 120°C |
| Continuous operating temperature | -55 ºC - +125 ºC |
| Tensile strength | 12 |
| Elongation at break (%) | 300 |
| Length change | – 8 % max. |
| Dielectric strength | 15 kV / mm |
| Specific resistance (Ohm x cm) | 10^14 |
| Característica | Valor |
| Material | Poliolefina |
| Pared | Paredes finas |
| Pegamento | con adhesivo interno |
| Índice de contracción | 3 : 1 |
| Temperatura de retracción (mín.) | 120°C |
| Temperatura de funcionamiento continuo | -55 ºC - +125 ºC |
| Resistencia a la tracción | 12 |
| Alargamiento a la rotura (%) | 300 |
| Cambio de longitud | – 8 % max. |
| Rigidez dieléctrica | 15 kV / mm |
| Resistencia específica (Ohm x cm) | 10^14 |
| Cecha | Wartość |
| Materiał | Poliolefina |
| Ściana | Cienkościenne |
| Klej | z wewnętrznym klejem |
| Współczynnik skurczu | 3 : 1 |
| Temperatura obkurczania (min.) | 120°C |
| Temperatura pracy ciągłej | -55 ºC - +125 ºC |
| Wytrzymałość na rozciąganie | 12 |
| Wydłużenie przy zerwaniu (%) | 300 |
| Zmiana długości | – 8 % max. |
| Wytrzymałość dielektryczna | 15 kV / mm |
| Opór właściwy (Ohm x cm) | 10^14 |
| Propriété | Valeur |
| Matériau | Polyoléfine |
| Paroi | à paroi mince |
| Colle | avec adhésif intérieur |
| Rapport de rétraction | 3 : 1 |
| Température de rétraction (min.) | 120°C |
| Température de fonctionnement continu | -55 ºC - +125 ºC |
| Résistance à la traction | 12 |
| Allongement à la rupture (%) | 300 |
| Changement de longueur | – 8 % max. |
| Rigidité diélectrique | 15 kV / mm |
| Résistance spécifique (Ohm x cm) | 10^14 |
| Caratteristica | Valore |
| Materiale | Poliolefina |
| Muro | A parete sottile |
| Colla | con adesivo interno |
| Rapporto di restringimento | 3 : 1 |
| Temperatura di restringimento (min.) | 120°C |
| Temperatura di esercizio continua | -55 ºC - +125 ºC |
| Resistenza alla trazione | 12 |
| Allungamento a rottura (%) | 300 |
| Variazione della lunghezza | – 8 % max. |
| Rigidità dielettrica | 15 kV / mm |
| Resistenza specifica (Ohm x cm) | 10^14 |
| الميزة | القيمة |
| المواد | البولي أوليفين |
| الحائط | رقيقة الجدران |
| الغراء | مع لاصق داخل |
| نسبة الانكماش | 3 : 1 |
| تقلص درجة الحرارة (دقيقة) | 120°C |
| درجة حرارة التشغيل المستمرة | -55 ºC - +125 ºC |
| قوة الشد | 12 |
| استطالة عند الكسر (٪) | 300 |
| تغيير الطول | – 8 % max. |
| قوة عازل | 15 kV / mm |
| مقاومة محددة (أوم × سم) | 10^14 |
| 특징 | 값 |
| 재료 | 폴리올레핀 |
| 벽 | 얇은 벽 |
| 접착제 | 내부 접착제가 있습니다. |
| 수축률 | 3 : 1 |
| 수축 온도(min.) | 120°C |
| 연속 작동 온도 | -55 ºC - +125 ºC |
| 인장 강도 | 12 |
| 파손시 신장(%) | 300 |
| 길이 변경 | – 8 % max. |
| 유전체 강도 | 15 kV / mm |
| 비저항 Ohm x cm | 10^14 |
| 特徴 | 価値 |
| 素材 | ポリオレフィン |
| 壁 | 薄肉 |
| 接着剤 | 内部接着剤付き |
| 収縮率 | 3 : 1 |
| 収縮温度（最低） | 120°C |
| 連続使用温度 | -55 ºC - +125 ºC |
| 引張強さ | 12 |
| 破断伸度(%) | 300 |
| 長さの変化 | – 8 % max. |
| 絶縁耐力 | 15 kV / mm |
| 比抵抗（オーム×cm） | 10^14 |
| 特征 | 价值 |
| 材料 | 聚烯烃 |
| 墙 | 薄壁的 |
| 胶合 | 带内胶 |
| 收缩率 | 3 : 1 |
| 收缩温度（最小值） | 120°C |
| 连续工作温度 | -55 ºC - +125 ºC |
| 抗拉强度 | 12 |
| 断裂伸长率（%） | 300 |
| 长度变化 | – 8 % max. |
| 介电强度 | 15 kV / mm |
| 比电阻（欧姆×厘米） | 10^14 |
| Funkce? | Hodnota? |
| Materiál? | Polyolefin |
| Zdi? | Tenkostěnná |
| Plepidlo? | Vnitřní lepidlo |
| Poměr smršťování | 3 : 1 |
| Teplota smršťování (min.) | 120°C |
| Kontinuální provozní teplota | -55 ºC - +125 ºC |
| Pevnost v tahu | 12 |
| Prodloužení při přerušení (%) | 300 |
| Změna délky | – 8 % max. |
| Dielektrická pevnost | 15 kV / mm |
| Specifický odpor (Ohm x cm) | 10^14 |
| Característica | Valor |
| Material | Poliolefina |
| Parede | Paredes finas |
| Cola | com adesivo interno |
| Rácio de retração | 3 : 1 |
| Temperatura de retração (min.) | 120°C |
| Temperatura de funcionamento contínuo | -55 ºC - +125 ºC |
| Resistência à tração | 12 |
| Alongamento na rutura (%) | 300 |
| Alteração do comprimento | – 8 % max. |
| Resistência dieléctrica | 15 kV / mm |
| Resistência específica (Ohm x cm) | 10^14 |
| Характеристика | Значение |
| Материал | Полиолефин |
| Стена | Тонкостенные |
| Клей | с внутренним клеем |
| Коэффициент усадки | 3 : 1 |
| Температура усадки (мин.) | 120°C |
| Непрерывная рабочая температура | -55 ºC - +125 ºC |
| Прочность на разрыв | 12 |
| Удлинение при разрыве (%) | 300 |
| Изменение длины | – 8 % max. |
| Диэлектрическая прочность | 15 kV / mm |
| Удельное сопротивление (Ом х см) | 10^14 |
| Özellik | Değer |
| Malzeme | Poliolefin |
| Duvarlar | Ince duvarlı |
| Tutkal | İç yapıştırıcı ile |
| Büzülme oranı | 3 : 1 |
| Sıcaklık daralma (min.) | 120°C |
| Sürekli çalışma sıcaklığı | -55 ºC - +125 ºC |
| Çekme mukavemeti | 12 |
| Kırılma uzaması (%) | 300 |
| Uzun değişikliği | – 8 % max. |
| Dielektrik mukavemet | 15 kV / mm |
| Spesifik direnç (Ohm x cm) | 10^14 |
| Eature | AlueCity in Alberta Canada |
| AZ ANYAK | Oliolefin |
| Minden | Vágfalú |
| Lue | Belső ragasztóval |
| Hrinkage arány | 3 : 1 |
| Hrink hőmérséklete (minimum) | 120°C |
| A folyamatos üzemi hőmérséklet | -55 ºC - +125 ºC |
| Szilára erősség | 12 |
| Hosszúság szünetelés (%) | 300 |
| Hosszúsági változás | – 8 % max. |
| IElectric erősség | 15 kV / mm |
| Specifik rezisztencia (Ohm x cm) | 10^14 |
| ویژگی ها | ارزش |
| مواد | پلی الیفین |
| دیوار | دیواره نازک |
| چسب ؟ | با چسب داخلی |
| نسبت انقباض | 3 : 1 |
| دمای کوچک شدن (دقیق) | 120°C |
| دمای کار مداوم | -55 ºC - +125 ºC |
| مقاومت کششی | 12 |
| کشیدگی در زمان شکستن (٪) | 300 |
| تغییر طول | – 8 % max. |
| مقاومت دی الکتریک | 15 kV / mm |
| مقاومت خاص (هم x سانتی متر) | 10^14 |
| Functie | Waarde |
| Materiaal | Polyolefine |
| Muur | Dunwandig |
| Lijm | met interne lijm |
| Krimpverhouding | 3 : 1 |
| Krimptemperatuur (min.) | 120°C |
| Continue bedrijfstemperatuur | -55 ºC - +125 ºC |
| Treksterkte | 12 |
| Rek bij breuk (%) | 300 |
| Lengteverandering | – 8 % max. |
| Diëlektrische sterkte | 15 kV / mm |
| Specifieke weerstand (Ohm x cm) | 10^14 |
| Caracteristică | Valoare |
| Material | Poliolefină |
| Perete | Cu pereți subțiri |
| Lipici | cu adeziv intern |
| Raportul de contracție | 3 : 1 |
| Temperatura de contracție (min.) | 120°C |
| Temperatura de funcționare continuă | -55 ºC - +125 ºC |
| Rezistența la tracțiune | 12 |
| Alungirea la rupere (%) | 300 |
| Schimbare de lungime | – 8 % max. |
| Rezistența dielectrică | 15 kV / mm |
| Rezistența specifică (Ohm x cm) | 10^14 |
| Ominaisuus | Arvo |
| Materiaali | Polyolefiini |
| Seinä | Ohutseinäiset |
| Liima | sisäisellä liimalla |
| Kutistumissuhde | 3 : 1 |
| Kutistumislämpötila (min.) | 120°C |
| Jatkuva käyttölämpötila | -55 ºC - +125 ºC |
| Vetolujuus | 12 |
| Murtovenymä (%) | 300 |
| Pituuden muutos | – 8 % max. |
| Dielektrinen lujuus | 15 kV / mm |
| Ominaisvastus (Ohm x cm) | 10^14 |
| Funkcia | Hodnota |
| Materiál | Polyolefín |
| Stena | Tenkostenné |
| Lepidlo | s vnútorným lepidlom |
| Pomer zmrštenia | 3 : 1 |
| Teplota zmršťovania (min.) | 120°C |
| Trvalá prevádzková teplota | -55 ºC - +125 ºC |
| Pevnosť v ťahu | 12 |
| Predĺženie pri pretrhnutí (%) | 300 |
| Zmena dĺžky | – 8 % max. |
| Dielektrická pevnosť | 15 kV / mm |
| Špecifický odpor (Ohm x cm) | 10^14 |
| Funktion | Værdi |
| Materiale | Polyolefin |
| Væg | Tyndvægget |
| Lim | med indvendigt klæbemiddel |
| Krympningsgrad | 3 : 1 |
| Krympetemperatur (min.) | 120°C |
| Kontinuerlig driftstemperatur | -55 ºC - +125 ºC |
| Trækstyrke | 12 |
| Forlængelse ved brud (%) | 300 |
| Ændring af længde | – 8 % max. |
| Dielektrisk styrke | 15 kV / mm |
| Specifik modstand (Ohm x cm) | 10^14 |
| Χαρακτηριστικό γνώρισμα | Αξία |
| Υλικό | Πολυολεφίνη |
| Τοίχος | Λεπτότοιχα |
| Κόλλα | με εσωτερική κόλλα |
| Αναλογία συρρίκνωσης | 3 : 1 |
| Θερμοκρασία συρρίκνωσης (min.) | 120°C |
| Συνεχής θερμοκρασία λειτουργίας | -55 ºC - +125 ºC |
| Αντοχή σε εφελκυσμό | 12 |
| Επιμήκυνση κατά τη θραύση (%) | 300 |
| Αλλαγή μήκους | – 8 % max. |
| Διηλεκτρική αντοχή | 15 kV / mm |
| Ειδική αντίσταση (Ohm x cm) | 10^14 |
| Функции | Стойност |
| Материал | Полиолефин |
| Стена | Тънкостенни |
| Лепило | с вътрешно лепило |
| Коефициент на свиване | 3 : 1 |
| Температура на свиване (мин.) | 120°C |
| Непрекъсната работна температура | -55 ºC - +125 ºC |
| Якост на опън | 12 |
| Удължение при скъсване (%) | 300 |
| Промяна на дължината | – 8 % max. |
| Диелектрична якост | 15 kV / mm |
| Специфично съпротивление (Ohm x cm) | 10^14 |
| Funktion | Värde |
| Material | Polyolefin |
| Vägg | Tunnväggig |
| Lim | med invändigt häftämne |
| Krympningsgrad | 3 : 1 |
| Krymptemperatur (min.) | 120°C |
| Kontinuerlig driftstemperatur | -55 ºC - +125 ºC |
| Draghållfasthet | 12 |
| Töjning vid brott (%) | 300 |
| Längdförändring | – 8 % max. |
| Dielektrisk hållfasthet | 15 kV / mm |
| Specifikt motstånd (Ohm x cm) | 10^14 |
| Funkcija | Vrednost |
| Material | Poliolefin |
| Stena | Tankostenski |
| Lepilo | z notranjim lepilom |
| Razmerje krčenja | 3 : 1 |
| Temperatura krčenja (min.) | 120°C |
| Trajna delovna temperatura | -55 ºC - +125 ºC |
| Natezna trdnost | 12 |
| Podaljšek ob pretrgu (%) | 300 |
| Sprememba dolžine | – 8 % max. |
| Dielektrična trdnost | 15 kV / mm |
| Specifična upornost (Ohm x cm) | 10^14 |
| Funktsioon | Väärtus |
| Materjal | Polüolefiin |
| Seina | Õhukesed seinad |
| Liim | sisemise liimiga |
| Kahanemise suhe | 3 : 1 |
| Kahanemistemperatuur (min.) | 120°C |
| Pidev töötemperatuur | -55 ºC - +125 ºC |
| Tõmbetugevus | 12 |
| Pikendus murdumisel (%) | 300 |
| Pikkuse muutus | – 8 % max. |
| Dielektriline tugevus | 15 kV / mm |
| Eritakistus (Ohm x cm) | 10^14 |
| Funkcija | Vertė |
| Medžiaga | Poliolefinas |
| Siena | Plonasienis |
| Klijai | su vidiniais klijais |
| Susitraukimo santykis | 3 : 1 |
| Sutraukimo temperatūra (min.) | 120°C |
| Nuolatinė darbinė temperatūra | -55 ºC - +125 ºC |
| Tempimo stipris | 12 |
| Pailgėjimas nutrūkus (%) | 300 |
| Ilgio pokytis | – 8 % max. |
| Dielektrinis stipris | 15 kV / mm |
| Savitoji varža (Ohm x cm) | 10^14 |
| Funkcija | Vērtība |
| Materiāls | Poliolefīns |
| Siena | Plānsienu |
| Līme | ar iekšējo līmi |
| Saraušanās koeficients | 3 : 1 |
| Samazināšanas temperatūra (min.) | 120°C |
| Pastāvīgā darba temperatūra | -55 ºC - +125 ºC |
| Stiepes izturība | 12 |
| Pagarinājums pārraušanas brīdī (%) | 300 |
| Garuma izmaiņas | – 8 % max. |
| Dielektriskā izturība | 15 kV / mm |
| Īpatnējā pretestība (Ohm x cm) | 10^14 |
| Eigenschaft | Wert |
| Material | Polyolefin |
| Wandung | dünnwandig |
| Kleber | mit Innenkleber |
| Schrumpfverhältnis | 3 : 1 |
| Schrumpftemperatur (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Zugfestigkeit | 12 |
| Bruchdehnung (%) | 300 |
| Längenänderung | – 8 % max. |
| Durchschlagfestigkeit | 15 kV / mm |
| Spezifischer Widerstand (Ohm x cm) | 10^14 |
| Eigenschaft | Wert |
| Material | Polyolefin |
| Wandung | dünnwandig |
| Kleber | mit Innenkleber |
| Schrumpfverhältnis | 3 : 1 |
| Schrumpftemperatur (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Zugfestigkeit | 12 |
| Bruchdehnung (%) | 300 |
| Längenänderung | – 8 % max. |
| Durchschlagfestigkeit | 15 kV / mm |
| Spezifischer Widerstand (Ohm x cm) | 10^14 |
Shrink tubing thin-walled transparent with internal adhesive - Technical data SPS-400 / 4 : 1
| Eigenschaft | Wert |
| Material | Polyolefin |
| Wandung | dünnwandig |
| Kleber | mit Innenkleber |
| Schrumpfverhältnis | 4 : 1 |
| Schrumpftemperatur (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Zugfestigkeit | 12 |
| Bruchdehnung (%) | 300 |
| Längenänderung | – 8 % max. |
| Durchschlagfestigkeit | 15 kV / mm |
| Spezifischer Widerstand (Ohm x cm) | 10^14 |
| Feature | Value |
| Material | Polyolefin |
| Wall | thin-walled |
| Glue | with inside adhesive |
| Shrinkage ratio | 4 : 1 |
| Shrink temperature (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Tensile strength | 12 |
| Elongation at break (%) | 300 |
| Length change | – 8 % max. |
| Dielectric strength | 15 kV / mm |
| Specific resistance (Ohm x cm) | 10^14 |
| Característica | Valor |
| Material | Poliolefina |
| Pared | Paredes finas |
| Pegamento | con adhesivo interno |
| Índice de contracción | 4 : 1 |
| Temperatura de retracción (mín.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Resistencia a la tracción | 12 |
| Alargamiento a la rotura (%) | 300 |
| Cambio de longitud | – 8 % max. |
| Rigidez dieléctrica | 15 kV / mm |
| Resistencia específica (Ohm x cm) | 10^14 |
| Cecha | Wartość |
| Materiał | Poliolefina |
| Ściana | Cienkościenne |
| Klej | z wewnętrznym klejem |
| Współczynnik skurczu | 4 : 1 |
| Temperatura obkurczania (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Wytrzymałość na rozciąganie | 12 |
| Wydłużenie przy zerwaniu (%) | 300 |
| Zmiana długości | – 8 % max. |
| Wytrzymałość dielektryczna | 15 kV / mm |
| Opór właściwy (Ohm x cm) | 10^14 |
| Propriété | Valeur |
| Matériau | Polyoléfine |
| Paroi | à paroi mince |
| Colle | avec adhésif intérieur |
| Rapport de rétraction | 4 : 1 |
| Température de rétraction (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Résistance à la traction | 12 |
| Allongement à la rupture (%) | 300 |
| Changement de longueur | – 8 % max. |
| Rigidité diélectrique | 15 kV / mm |
| Résistance spécifique (Ohm x cm) | 10^14 |
| Caratteristica | Valore |
| Materiale | Poliolefina |
| Muro | A parete sottile |
| Colla | con adesivo interno |
| Rapporto di restringimento | 4 : 1 |
| Temperatura di restringimento (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Resistenza alla trazione | 12 |
| Allungamento a rottura (%) | 300 |
| Variazione della lunghezza | – 8 % max. |
| Rigidità dielettrica | 15 kV / mm |
| Resistenza specifica (Ohm x cm) | 10^14 |
| الميزة | القيمة |
| المواد | البولي أوليفين |
| الحائط | رقيقة الجدران |
| الغراء | مع لاصق داخل |
| نسبة الانكماش | 4 : 1 |
| تقلص درجة الحرارة (دقيقة) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| قوة الشد | 12 |
| استطالة عند الكسر (٪) | 300 |
| تغيير الطول | – 8 % max. |
| قوة عازل | 15 kV / mm |
| مقاومة محددة (أوم × سم) | 10^14 |
| 특징 | 값 |
| 재료 | 폴리올레핀 |
| 벽 | 얇은 벽 |
| 접착제 | 내부 접착제가 있습니다. |
| 수축률 | 4 : 1 |
| 수축 온도(min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| 인장 강도 | 12 |
| 파손시 신장(%) | 300 |
| 길이 변경 | – 8 % max. |
| 유전체 강도 | 15 kV / mm |
| 비저항 Ohm x cm | 10^14 |
| 特徴 | 価値 |
| 素材 | ポリオレフィン |
| 壁 | 薄肉 |
| 接着剤 | 内部接着剤付き |
| 収縮率 | 4 : 1 |
| 収縮温度（最低） | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| 引張強さ | 12 |
| 破断伸度(%) | 300 |
| 長さの変化 | – 8 % max. |
| 絶縁耐力 | 15 kV / mm |
| 比抵抗（オーム×cm） | 10^14 |
| 特征 | 价值 |
| 材料 | 聚烯烃 |
| 墙 | 薄壁的 |
| 胶合 | 带内胶 |
| 收缩率 | 4 : 1 |
| 收缩温度（最小值） | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| 抗拉强度 | 12 |
| 断裂伸长率（%） | 300 |
| 长度变化 | – 8 % max. |
| 介电强度 | 15 kV / mm |
| 比电阻（欧姆×厘米） | 10^14 |
| Funkce? | Hodnota? |
| Materiál? | Polyolefin |
| Zdi? | Tenkostěnná |
| Plepidlo? | Vnitřní lepidlo |
| Poměr smršťování | 4 : 1 |
| Teplota smršťování (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Pevnost v tahu | 12 |
| Prodloužení při přerušení (%) | 300 |
| Změna délky | – 8 % max. |
| Dielektrická pevnost | 15 kV / mm |
| Specifický odpor (Ohm x cm) | 10^14 |
| Característica | Valor |
| Material | Poliolefina |
| Parede | Paredes finas |
| Cola | com adesivo interno |
| Rácio de retração | 4 : 1 |
| Temperatura de retração (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Resistência à tração | 12 |
| Alongamento na rutura (%) | 300 |
| Alteração do comprimento | – 8 % max. |
| Resistência dieléctrica | 15 kV / mm |
| Resistência específica (Ohm x cm) | 10^14 |
| Характеристика | Значение |
| Материал | Полиолефин |
| Стена | Тонкостенные |
| Клей | с внутренним клеем |
| Коэффициент усадки | 4 : 1 |
| Температура усадки (мин.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Прочность на разрыв | 12 |
| Удлинение при разрыве (%) | 300 |
| Изменение длины | – 8 % max. |
| Диэлектрическая прочность | 15 kV / mm |
| Удельное сопротивление (Ом х см) | 10^14 |
| Özellik | Değer |
| Malzeme | Poliolefin |
| Duvarlar | Ince duvarlı |
| Tutkal | İç yapıştırıcı ile |
| Büzülme oranı | 4 : 1 |
| Sıcaklık daralma (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Çekme mukavemeti | 12 |
| Kırılma uzaması (%) | 300 |
| Uzun değişikliği | – 8 % max. |
| Dielektrik mukavemet | 15 kV / mm |
| Spesifik direnç (Ohm x cm) | 10^14 |
| Eature | AlueCity in Alberta Canada |
| AZ ANYAK | Oliolefin |
| Minden | Vágfalú |
| Lue | Belső ragasztóval |
| Hrinkage arány | 4 : 1 |
| Hrink hőmérséklete (minimum) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Szilára erősség | 12 |
| Hosszúság szünetelés (%) | 300 |
| Hosszúsági változás | – 8 % max. |
| IElectric erősség | 15 kV / mm |
| Specifik rezisztencia (Ohm x cm) | 10^14 |
| ویژگی ها | ارزش |
| مواد | پلی الیفین |
| دیوار | دیواره نازک |
| چسب ؟ | با چسب داخلی |
| نسبت انقباض | 4 : 1 |
| دمای کوچک شدن (دقیق) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| مقاومت کششی | 12 |
| کشیدگی در زمان شکستن (٪) | 300 |
| تغییر طول | – 8 % max. |
| مقاومت دی الکتریک | 15 kV / mm |
| مقاومت خاص (هم x سانتی متر) | 10^14 |
| Functie | Waarde |
| Materiaal | Polyolefine |
| Muur | Dunwandig |
| Lijm | met interne lijm |
| Krimpverhouding | 4 : 1 |
| Krimptemperatuur (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Treksterkte | 12 |
| Rek bij breuk (%) | 300 |
| Lengteverandering | – 8 % max. |
| Diëlektrische sterkte | 15 kV / mm |
| Specifieke weerstand (Ohm x cm) | 10^14 |
| Caracteristică | Valoare |
| Material | Poliolefină |
| Perete | Cu pereți subțiri |
| Lipici | cu adeziv intern |
| Raportul de contracție | 4 : 1 |
| Temperatura de contracție (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Rezistența la tracțiune | 12 |
| Alungirea la rupere (%) | 300 |
| Schimbare de lungime | – 8 % max. |
| Rezistența dielectrică | 15 kV / mm |
| Rezistența specifică (Ohm x cm) | 10^14 |
| Ominaisuus | Arvo |
| Materiaali | Polyolefiini |
| Seinä | Ohutseinäiset |
| Liima | sisäisellä liimalla |
| Kutistumissuhde | 4 : 1 |
| Kutistumislämpötila (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Vetolujuus | 12 |
| Murtovenymä (%) | 300 |
| Pituuden muutos | – 8 % max. |
| Dielektrinen lujuus | 15 kV / mm |
| Ominaisvastus (Ohm x cm) | 10^14 |
| Funkcia | Hodnota |
| Materiál | Polyolefín |
| Stena | Tenkostenné |
| Lepidlo | s vnútorným lepidlom |
| Pomer zmrštenia | 4 : 1 |
| Teplota zmršťovania (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Pevnosť v ťahu | 12 |
| Predĺženie pri pretrhnutí (%) | 300 |
| Zmena dĺžky | – 8 % max. |
| Dielektrická pevnosť | 15 kV / mm |
| Špecifický odpor (Ohm x cm) | 10^14 |
| Funktion | Værdi |
| Materiale | Polyolefin |
| Væg | Tyndvægget |
| Lim | med indvendigt klæbemiddel |
| Krympningsgrad | 4 : 1 |
| Krympetemperatur (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Trækstyrke | 12 |
| Forlængelse ved brud (%) | 300 |
| Ændring af længde | – 8 % max. |
| Dielektrisk styrke | 15 kV / mm |
| Specifik modstand (Ohm x cm) | 10^14 |
| Χαρακτηριστικό γνώρισμα | Αξία |
| Υλικό | Πολυολεφίνη |
| Τοίχος | Λεπτότοιχα |
| Κόλλα | με εσωτερική κόλλα |
| Αναλογία συρρίκνωσης | 4 : 1 |
| Θερμοκρασία συρρίκνωσης (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Αντοχή σε εφελκυσμό | 12 |
| Επιμήκυνση κατά τη θραύση (%) | 300 |
| Αλλαγή μήκους | – 8 % max. |
| Διηλεκτρική αντοχή | 15 kV / mm |
| Ειδική αντίσταση (Ohm x cm) | 10^14 |
| Функции | Стойност |
| Материал | Полиолефин |
| Стена | Тънкостенни |
| Лепило | с вътрешно лепило |
| Коефициент на свиване | 4 : 1 |
| Температура на свиване (мин.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Якост на опън | 12 |
| Удължение при скъсване (%) | 300 |
| Промяна на дължината | – 8 % max. |
| Диелектрична якост | 15 kV / mm |
| Специфично съпротивление (Ohm x cm) | 10^14 |
| Funktion | Värde |
| Material | Polyolefin |
| Vägg | Tunnväggig |
| Lim | med invändigt häftämne |
| Krympningsgrad | 4 : 1 |
| Krymptemperatur (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Draghållfasthet | 12 |
| Töjning vid brott (%) | 300 |
| Längdförändring | – 8 % max. |
| Dielektrisk hållfasthet | 15 kV / mm |
| Specifikt motstånd (Ohm x cm) | 10^14 |
| Funkcija | Vrednost |
| Material | Poliolefin |
| Stena | Tankostenski |
| Lepilo | z notranjim lepilom |
| Razmerje krčenja | 4 : 1 |
| Temperatura krčenja (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Natezna trdnost | 12 |
| Podaljšek ob pretrgu (%) | 300 |
| Sprememba dolžine | – 8 % max. |
| Dielektrična trdnost | 15 kV / mm |
| Specifična upornost (Ohm x cm) | 10^14 |
| Funktsioon | Väärtus |
| Materjal | Polüolefiin |
| Seina | Õhukesed seinad |
| Liim | sisemise liimiga |
| Kahanemise suhe | 4 : 1 |
| Kahanemistemperatuur (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Tõmbetugevus | 12 |
| Pikendus murdumisel (%) | 300 |
| Pikkuse muutus | – 8 % max. |
| Dielektriline tugevus | 15 kV / mm |
| Eritakistus (Ohm x cm) | 10^14 |
| Funkcija | Vertė |
| Medžiaga | Poliolefinas |
| Siena | Plonasienis |
| Klijai | su vidiniais klijais |
| Susitraukimo santykis | 4 : 1 |
| Sutraukimo temperatūra (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Tempimo stipris | 12 |
| Pailgėjimas nutrūkus (%) | 300 |
| Ilgio pokytis | – 8 % max. |
| Dielektrinis stipris | 15 kV / mm |
| Savitoji varža (Ohm x cm) | 10^14 |
| Funkcija | Vērtība |
| Materiāls | Poliolefīns |
| Siena | Plānsienu |
| Līme | ar iekšējo līmi |
| Saraušanās koeficients | 4 : 1 |
| Samazināšanas temperatūra (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Stiepes izturība | 12 |
| Pagarinājums pārraušanas brīdī (%) | 300 |
| Garuma izmaiņas | – 8 % max. |
| Dielektriskā izturība | 15 kV / mm |
| Īpatnējā pretestība (Ohm x cm) | 10^14 |
| Eigenschaft | Wert |
| Material | Polyolefin |
| Wandung | dünnwandig |
| Kleber | mit Innenkleber |
| Schrumpfverhältnis | 4 : 1 |
| Schrumpftemperatur (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Zugfestigkeit | 12 |
| Bruchdehnung (%) | 300 |
| Längenänderung | – 8 % max. |
| Durchschlagfestigkeit | 15 kV / mm |
| Spezifischer Widerstand (Ohm x cm) | 10^14 |
| Eigenschaft | Wert |
| Material | Polyolefin |
| Wandung | dünnwandig |
| Kleber | mit Innenkleber |
| Schrumpfverhältnis | 4 : 1 |
| Schrumpftemperatur (min.) | 120°C |
| Dauerbetriebstemperatur | -55 ºC - +125 ºC |
| Zugfestigkeit | 12 |
| Bruchdehnung (%) | 300 |
| Längenänderung | – 8 % max. |
| Durchschlagfestigkeit | 15 kV / mm |
| Spezifischer Widerstand (Ohm x cm) | 10^14 |
Shrink tubing thin-walled transparent with inner adhesive - Technical data sheet for download
For detailed information on our shrink tubing thin-walled transparent with internal adhesive, we offer you a comprehensive technical data sheet for download. This data sheet contains all the important technical specifications, including the material composition, temperature resistance and electrical insulation properties. You will also find detailed information on the dimensions and availability of our products.
Download: Technical data sheet
Do you have any questions about our offer?
Shrink tubing thin-walled transparent with inner adhesive
Transparent heat-shrink tubing with internal adhesive for cable protection
As a distributor of heat shrink tubing thin-walled transparent with internal adhesive, we offer you the best selection and quality. Our range includes everything you need for your projects, especially when it comes to electrical insulation and cable protection. We have the right thick-walled transparent heat shrink tubing with internal adhesive, which is perfect for various applications.
Transparent heat-shrink tubing with internal adhesive is particularly practical for electrical insulation. Thanks to the transparency, you can keep an overview of the connections and cables without compromising the protective effect. The inner adhesive ensures a secure and permanent connection so that your cables are optimally protected.
Our transparent thin-walled shrink tubing is also an excellent choice for electronics projects. It offers protection without taking up unnecessary space. Transparent heat shrink tubing is ideal for sensitive electronic components as it offers protection without compromising visibility.
We are your reliable supplier of thin-walled transparent shrink tubing with internal adhesive. Whether you need individual shrink sleeves or larger quantities, we have the right product for you. Our heat shrink tubing is of high quality and offers long-term protection for your cables and connections.
Transparent heat shrink tubing with internal adhesive is also perfect for cable protection. It keeps your cables safe and protected, even in demanding environments. The inner adhesive ensures that the heat-shrink tubing stays firmly in place and does not slip. This keeps your cables tidy and secure at all times.
We have everything you need for your projects. As an experienced retailer of thin-walled transparent heat shrink tubing with internal adhesive, we are here to help and advise you. Our products are of the highest quality and offer you the security you need for your projects.
If you are looking for transparent thin-walled heat shrink tubing for electronics or transparent thin-walled heat shrink tubing with internal adhesive, then you have come to the right place. Discover our extensive range and see the quality of our products for yourself. We look forward to being able to help you!
Transparent heat-shrink tubing with internal adhesive is particularly practical for electrical insulation. Thanks to the transparency, you can keep an overview of the connections and cables without compromising the protective effect. The inner adhesive ensures a secure and permanent connection so that your cables are optimally protected.
Our transparent thin-walled shrink tubing is also an excellent choice for electronics projects. It offers protection without taking up unnecessary space. Transparent heat shrink tubing is ideal for sensitive electronic components as it offers protection without compromising visibility.
We are your reliable supplier of thin-walled transparent shrink tubing with internal adhesive. Whether you need individual shrink sleeves or larger quantities, we have the right product for you. Our heat shrink tubing is of high quality and offers long-term protection for your cables and connections.
Transparent heat shrink tubing with internal adhesive is also perfect for cable protection. It keeps your cables safe and protected, even in demanding environments. The inner adhesive ensures that the heat-shrink tubing stays firmly in place and does not slip. This keeps your cables tidy and secure at all times.
We have everything you need for your projects. As an experienced retailer of thin-walled transparent heat shrink tubing with internal adhesive, we are here to help and advise you. Our products are of the highest quality and offer you the security you need for your projects.
If you are looking for transparent thin-walled heat shrink tubing for electronics or transparent thin-walled heat shrink tubing with internal adhesive, then you have come to the right place. Discover our extensive range and see the quality of our products for yourself. We look forward to being able to help you!
What can we do for you?
Contact our product experts
What can we do for you?
Contact our product experts
Oliver Bürli
Head of Hose Technology, Sales and Product Management
Do you have any questions about:
Shrink tubing thin-walled transparent with inner adhesive
Just send us a short message and we will be happy to answer your questions by phone or e-mail.
Questions?
Write to us!
Would you like to find out more about our high-quality products?
We have a large warehouse, short delivery times and duty-free delivery!
Do not hesitate to contact us, we will be happy toadvise you personally.
Do not hesitate to contact us, we will be happy toadvise you personally.
Your contact persons
Request a callback
Would you like a personal telephone consultation?
Simply fill out the form and we will get back to you.
What are the advantages of using DC voltage transformers compared to AC voltage transformers?
What are the advantages of using DC voltage transformers compared to AC voltage transformers?
X
Our hoses at a glance
Because the part makes the price. Just enter your email and we will send you our catalog free of charge.
Request catalog
Frequently asked questions about shrink tubing thin-walled transparent with inner adhesive
1. How does shrink tubing thin-walled transparent with inner adhesive work?
Shrink tubing thick-walled transparent with inner adhesive works by heating. When heated, the tubing shrinks and the inner adhesive is activated, which then creates a strong and permanent connection. This method provides effective protection and insulation for cables and connections.
2. For which applications is shrink tubing thin-walled transparent with internal adhesive suitable?
Shrink tubing thin-walled transparent with inner adhesive is versatile:
- Electrical insulation
- Cable protection
- Repair of damaged cables
- Protection against moisture and corrosion
3. What are the advantages of transparent shrink tubing with internal adhesive?
A transparent shrink sleeve with internal adhesive offers several advantages:
- Transparency enables visibility of cables and connections
- Inner adhesive ensures a secure, permanent connection
- High level of protection against moisture, chemicals and abrasion
4. how is shrink tubing thick-walled transparent with internal adhesive installed?
Installation is simple:
- Cut the heat-shrink tubing to the desired length.
- Slide the tubing over the area to be insulated.
- Heat the tubing evenly with a heat gun or other suitable tool.
- Allow the tubing to cool so that the internal adhesive hardens.
5. what sizes and lengths are available for shrink tubing thick-walled transparent with inner adhesive?
Shrink tubing thick-walled transparent with inner adhesive is available in various sizes and lengths:
- Diameter: from a few millimeters to several centimeters
- Lengths: usually by the meter or in pre-cut pieces
- Customization is possible depending on requirements
